Cutting force analysis of oak for the development of a cutting force model

[1]  Eero Kivimaa.  Die Schnittkraft in der Holzbearbeitung , 2007, Holz als Roh- und Werkstoff.

[2]  Philip Hackney,et al.  A Review of Wood Machining Literature with a Special Focus on Sawing , 2013 .

[3]  M. E. Merchant.  Mechanics of the Metal Cutting Process. I. Orthogonal Cutting and a Type 2 Chip , 1945 .

[4]  Ulrich Müller,et al.  Cutting force analysis of a linear cutting process of spruce , 2018 .

[5]  Robert W. Meyer,et al.  Cutting forces for tension and normal wood of maple , 2006 .

[6]  Liu Zhanqiang,et al.  Definition and determination of the minimum uncut chip thickness of microcutting , 2013 .

[7]  A. Atkins.  Modelling metal cutting using modern ductile fracture mechanics: quantitative explanations for some longstanding problems , 2003 .

[8]  A. Atkins,et al.  Specific cutting resistance while sawing of wood - the size effect. , 2010 .

[9]  Norman Charles Franz,et al.  An Analysis of the Wood-Cutting Process , 1958 .

[10]  D. Chuchala,et al.  Revisiting the estimation of cutting power with different energetic methods while sawing soft and hard woods on the circular sawing machine: a Central European case , 2020, Wood Science and Technology.

[11]  Jan Tippner,et al.  Development of a novel device for analysis of high-speed cutting processes considering the influence of dynamic factors , 2021, The International Journal of Advanced Manufacturing Technology.

[12]  Raquel Gonçalves,et al.  Orthogonal cutting forces in juvenile and mature Pinus taeda wood , 2005 .

[13]  Philip Hackney,et al.  A PREDICTIVE MODEL FOR THE CUTTING FORCE IN WOOD MACHINING DEVELOPED USING MECHANICAL PROPERTIES , 2012 .

[14]  Frédéric Mothe,et al.  Cutting forces in wood machining – Basics and applications in industrial processes. A review COST Action E35 2004–2008: Wood machining – micromechanics and fracture , 2009 .

[15]  W. Weibull.  A Statistical Distribution Function of Wide Applicability , 1951 .

[16]  B. O. M. Axelsson.  Lateral cutting force during machining of wood due to momentary disturbances in the wood structure and degree of wear of the cutting tool , 2007, Holz als Roh- und Werkstoff.

[17]  Hiroaki Tanaka,et al.  Minimum thickness of cut in micromachining , 1992 .

[18]  Antônio Carlos Néri,et al.  Forças de corte ortogonal na madeira juvenil e adulta de Pinus taeda , 2005 .

[19]  V. Novák,et al.  Influence of wood modification on cutting force, specific cutting resistance and fracture parameters during the sawing process using circular sawing machine , 2020, European Journal of Wood and Wood Products.

[20]  Anders Grönlund,et al.  MAIN AND NORMAL CUTTING FORCES BY MACHINING WOOD OF PINUS SYLVESTRIS , 2011 .

[21]  B. O. M. Axelsson,et al.  Studies of the main cutting force at and near a cutting edge , 2007, Holz als Roh- und Werkstoff.

[22]  M. C. Shaw.  The size effect in metal cutting , 1952, Journal of Fluids Engineering.