This paper investigates the modelling and predictive control of a drinking water supply network with the aim of minimising the energy and economic cost. A model predictive controller, MPC, is applied to a nonlinear model of a drinking water network that follows certain constraints to maintain consumer pressure desire. A model predictive controller, MPC, is based on a simple model that models the main characteristics of a water distribution network, optimizes a desired cost minimisation, and keeps the system inside specified constraints. In comparison to a logic (on/off) control design, controlling the drinking water supply network with the MPC showed reduction of the energy and the economic cost of running the system. This has been achieved by minimising actuator control effort and by shifting the actuator use towards the night time, where energy prices are lower. Along with energy cost reduction the MPC also achieves reduction in the amount of consumed water by keeping the pressure closer to the lower pressure constraint.
[1]
Alberto Bemporad,et al.
Decentralized model predictive control of drinking water networks using an automatic subsystem decomposition approach
,
2010
.
[2]
Alberto Bemporad,et al.
Water demand forecasting for the optimal operation of large-scale drinking water networks: The Barcelona Case Study.
,
2014
.
[3]
Prabhata K. Swamee,et al.
Design of Water Supply Pipe Networks
,
2008
.
[4]
Alberto Bemporad,et al.
Hierarchical and decentralised model predictive control of drinking water networks: Application to Barcelona case study
,
2012
.
[5]
Pavel Trnka,et al.
Application of Distributed MPC to Barcelona Water Distribution Network
,
2011
.
[6]
Vicenç Puig,et al.
Operational Predictive Optimal Control of Barcelona Water Transport Network
,
2011
.
[7]
Rafael Wisniewski,et al.
Adaptive reference control for pressure management in water networks
,
2015,
2015 European Control Conference (ECC).