Very low roughness MAPLE-deposited films of a light emitting polymer: an alternative to spin coating

The matrix assisted pulsed laser evaporation (MAPLE) technique is emerging as an alternative route to conventional deposition methods of organic materials (solution-phase and thermal evaporation approaches). However, the high surface roughness of the films deposited by MAPLE makes this technique not compatible with applications in electronics and photonics. In this paper we report the deposition of MAPLE-films of a green light emitting polymer, commercially named ADS125GE, with remarkable low roughness values, down to about 10 nm at the thickness conventionally used in photonic devices (~40 nm). This issue is discussed as a function of polymer concentration, target-substrate distance and substrate rotation based on AFM topography images, roughness estimation and optical (absorption and luminescent) measurements. In addition we have fabricated an organic light emitting diode with this technique using the best deposition parameters which guarantee the lowest roughness. These results open the way to MAPLE applications in organic photonics and opto-electronics.

[1]  R. A. McGill,et al.  The effect of the matrix on film properties in matrix-assisted pulsed laser evaporation , 2002 .

[2]  Gregor Schwartz,et al.  White organic light-emitting diodes with fluorescent tube efficiency , 2009, Nature.

[3]  L. Zhigilei,et al.  Making molecular balloons in laser-induced explosive boiling of polymer solutions. , 2007, Physical review letters.

[4]  D. Meyerhofer.  Characteristics of resist films produced by spinning , 1978 .

[5]  J. M. Fitz-Gerald,et al.  Pulsed laser deposition vs. matrix assisted pulsed laser evaporation for growth of biodegradable polymer thin films , 2005 .

[6]  Daniel Sandholzer,et al.  Thin organic films by atmospheric-pressure ion deposition , 2004, Nature materials.

[7]  G. Gigli,et al.  Poly-(3-hexylthiophene)/[6,6]-phenyl-C61-butyric-acid-methyl-ester bilayer deposition by matrix-assisted pulsed laser evaporation for organic photovoltaic applications , 2012 .

[8]  Rodney D. Priestley,et al.  Ultrastable nanostructured polymer glasses. , 2012, Nature materials.

[9]  J. Schou,et al.  Deposition of matrix-free fullerene films with improved morphology by matrix-assisted pulsed laser evaporation (MAPLE) , 2013 .

[10]  H. Sirringhaus,et al.  High-Resolution Ink-Jet Printing of All-Polymer Transistor Circuits , 2000, Science.

[11]  R. A. McGill,et al.  An experimental investigation of inhomogeneities in resonant infrared matrix-assisted pulsed-laser deposited thin polymer films , 2010 .

[12]  L. Zhigilei,et al.  The effect of the target structure and composition on the ejection and transport of polymer molecules and carbon nanotubes in matrix-assisted pulsed laser evaporation , 2011 .

[13]  M. G. Manera,et al.  Study of temperature dependence and angular distribution of poly(9,9-dioctylfluorene) polymer films deposited by matrix-assisted pulsed laser evaporation (MAPLE) , 2009 .

[14]  Matrix assisted pulsed laser deposition of light emitting polymer thin films , 2005 .

[15]  M. G. Manera,et al.  Dependence of the surface roughness of MAPLE-deposited films on the solvent parameters , 2010 .

[16]  Armando Luches,et al.  Applications of the matrix-assisted pulsed laser evaporation method for the deposition of organic, biological and nanoparticle thin films: a review , 2011 .

[17]  A. G. Emslie,et al.  Flow of a Viscous Liquid on a Rotating Disk , 1958 .

[18]  Stuart I. Yaniger,et al.  “Polyaniline”: Interconversion of Metallic and Insulating Forms , 1985 .

[19]  D. M. Bubb,et al.  Assessing the effect of the matrix in resonant infrared MAPLE , 2007 .

[20]  B. Schwartz,et al.  Conjugated polymers as molecular materials: how chain conformation and film morphology influence energy transfer and interchain interactions. , 2003, Annual review of physical chemistry.

[21]  L. Zhigilei,et al.  Molecular dynamics simulation study of the ejection and transport of polymer molecules in matrix-assisted pulsed laser evaporation , 2007 .

[22]  Carmen Bartic,et al.  Organic thin-film transistors as transducers for (bio) analytical applications , 2005, Analytical and bioanalytical chemistry.

[23]  A. Stiff-Roberts,et al.  Resonant infrared matrix-assisted pulsed laser evaporation of CdSe colloidal quantum dot/poly[2-methoxy-5-(2′-ethylhexyloxy)-1,4-(1-cyano vinylene)phenylene] hybrid nanocomposite thin films , 2009 .

[24]  E. W. Meijer,et al.  Two-dimensional charge transport in self-organized, high-mobility conjugated polymers , 1999, Nature.

[25]  Li Peng,et al.  Reactively sputtered Fe3O4-based films for spintronics , 2013 .

[26]  C. Tang,et al.  Organic Electroluminescent Diodes , 1987 .

[27]  A. Stiff-Roberts,et al.  The impact of laser-target absorption depth on the surface and internal morphology of matrix-assisted pulsed laser evaporated conjugated polymer thin films , 2009 .

[28]  J. Greer.  Design challenges for matrix assisted pulsed laser evaporation and infrared resonant laser evaporation equipment , 2011 .

[29]  K. Neoh,et al.  Spectroscopic studies of protonation, oxidation and light irradiation of polyaniline solutions , 1992 .

[30]  A. Luches,et al.  Matrix assisted pulsed laser evaporation: the surface cluster problem , 2011 .

[31]  W. Fann,et al.  Enhanced hole mobility in poly(2-methoxy-5-(2 '-ethylhexoxy)-1,4-phenylenevinylene) by elimination of nanometer-sized domains (vol 17, pg 1835, 2005) , 2005 .

[32]  M. Martino,et al.  Solvent-related effects in MAPLE mechanism , 2013 .

[33]  Yijian Shi,et al.  Device performance and polymer morphology in polymer light emitting diodes: The control of thin film morphology and device quantum efficiency , 2000 .

[34]  L. Vicari,et al.  Matrix-Assisted Pulsed Laser Evaporation of polythiophene films , 2008 .

[35]  R. A. McGill,et al.  The deposition, structure, pattern deposition, and activity of biomaterial thin-films by matrix-assisted pulsed-laser evaporation (MAPLE) and MAPLE direct write , 2001 .

[36]  W. Fann,et al.  Enhanced Hole Mobility in Poly‐(2‐methoxy‐5‐(2′‐ethylhexoxy)‐1,4‐phenylenevinylene) by Elimination of Nanometer‐Sized Domains , 2005 .

[37]  R. A. McGill,et al.  Laser deposition of polymer and biomaterial films. , 2003, Chemical reviews.

[38]  J. Schou,et al.  Surface morphology of polyethylene glycol films produced by matrix-assisted pulsed laser evaporation (MAPLE): Dependence on substrate temperature , 2006 .

[39]  M. I. Sluch,et al.  Photo- and electroluminescence of poly(2-methoxy,5-(2′-ethylhexyloxy)-p-phenylene vinylene) Langmuir-Blodgett films , 1998 .

[40]  Howard E. Katz,et al.  Thin-Film Organic Electronic Devices , 2009 .

[41]  Rodney D. Priestley,et al.  Origins of nanostructure in amorphous polymer coatings via matrix assisted pulsed laser evaporation , 2013 .

[42]  Growth of aromatic molecules on solid substrates for applications in organic electronics , 2004 .

[43]  L. Zhigilei,et al.  Generation of surface features in films deposited by matrix-assisted pulsed laser evaporation: the effects of the stress confinement and droplet landing velocity , 2008 .