论文信息 - Assessment of absolute partial discharge intensity from a free-space radiometric measurement

Assessment of absolute partial discharge intensity from a free-space radiometric measurement

Partial discharge (PD) is measured simultaneously using free-space radiometric (FSR) and a galvanic contact measurement technique based on the IEC 60270 standard. The PD source is an emulator of the floating-electrode type. The radiated signal is captured using a biconical antenna. A method of estimating absolute partial discharge (PD) activity level from a radiometric measurement by relating effective radiated power to PD intensity using a PD calibration device is presented.

[1] Yong Zhang,et al. Comparison of contact measurement and free-space radiation measurement of partial discharge signals , 2015, 2015 21st International Conference on Automation and Computing (ICAC).

[2] B. Hampton. UHF diagnostics for gas insulated substations , 1999 .

[3] David Upton,et al. Radiometric Wireless Sensor Network Monitoring of Partial Discharge Sources in Electrical Substations , 2015, Int. J. Distributed Sens. Networks.

[4] E. Gulski,et al. Guide for Electrical Partial Discharge Measurements in compliance to IEC 60270 , 2008 .

[5] Robert Atkinson,et al. Radiometric location of partial discharge sources for the future smart grid , 2014, 2014 XXXIth URSI General Assembly and Scientific Symposium (URSI GASS).