Environmental resource footprinting of drug manufacturing: Effects of scale-up and tablet dosage

The formulation and scale-up of batch processes is one of the major challenges in the development of pharmaceutical dosage forms and at the same time a significant resource demanding process which is generally overlooked in environmental sustainability assessments. First, this paper proposes general trends in the experience curve of cumulative resource consumption of pharmaceutical tablet manufacturing of PREZISTA® 800 mg through wet granulation (WG) at four consecutive scales in both R&D and manufacturing environments (resp. WG1 = 1 kg/h, WG5 = 5 kg/h, WG30 = 30 kg/h and WG240 = 240 kg/h). Second, the authors aim at evaluating the environmental impact from a life cycle perspective of a daily consumption of PREZISTA® 2× 400 mg tablets versus the bioequivalent PREZISTA® 800 mg tablet which was launched to enhance patient compliance. Environmental sustainability assessment was conducted at three different system boundaries, which enables identification, localization and eventually reduction of burdens, in this case natural resource extraction. Exergy Analysis (EA) was used at process level (α) and plant level (β) while a cradle-to-gate Exergetic Life Cycle Assessment (ELCA) was conducted at the overall industrial level (γ) by means of the CEENE method (Cumulative Exergy Extraction from the Natural Environment). Life cycle stages taken into account are Active Pharmaceutical Ingredient (API) production, Drug Product (DP) production and Packaging. At process level (α), the total resource extraction for the manufacturing of one daily dose of PREZISTA® (800 mg tablet) amounted up to 0.44 MJex at the smallest scale (WG1) while this amount proved to be reduced by 58%, 79% and 83% at WG5, WG30 and WG240 respectively. Expanding the boundaries to the overall industrial level (γ) reveals that the main resource demand is at the production of the Active Pharmaceutical Ingredient (API), excipients, packaging materials and cleaning media used in DP production. At the largest scale (WG240) the use of cleaning media during DP production contributes considerably less to the total resource extraction. Overall, the effect of scale-up and learning on resource consumption during DP production showed to possess a power-law experience curve y = 2.40 * x−0.57 when shifting from WG1 (smallest lab scale) to WG240 (industrial manufacturing). Tablet dosage (2× 400 mg versus 1× 800 mg) did not significantly affect the absolute environmental burden. However, the relative contribution of resource categories did change due to the different production technology. It could be concluded that in meeting social and economic demands by launching the PREZISTA® 800 mg tablet, no trade-off in environmental burden occurred. On the long term, future research should strive to take into account R&D processes and all services related to pipeline activities taking place prior to market launch and eventually to allocate impacts to the final product.

[1]  Jan Szargut,et al.  Exergy Analysis of Thermal, Chemical, and Metallurgical Processes , 1988 .

[2]  Not Indicated,et al.  International Reference Life Cycle Data System (ILCD) Handbook - General guide for Life Cycle Assessment - Detailed guidance , 2010 .

[3]  Stijn Bruers,et al.  Exergy: its potential and limitations in environmental science and technology. , 2008, Environmental science & technology.

[4]  K. Hungerbühler,et al.  Bridging data gaps in environmental assessments: Modeling impacts of fine and basic chemical production , 2009 .

[5]  Hedzer J. van der Kooi,et al.  Exergy analysis : a tool to study the sustainability of food supply chains , 2006 .

[6]  Jo Dewulf,et al.  Assessment of the Integral Resource Consumption of Individual Chemical Production Processes in a Multipurpose Pharmaceutical Production Plant: A Complex Task , 2009 .

[7]  Arnold Janssens,et al.  An improved calculation of the exergy of natural resources for exergetic life cycle assessment (ELCA). , 2006, Environmental science & technology.

[8]  Shayne C. Gad,et al.  Pharmaceutical manufacturing handbook : production and processes , 2008 .

[9]  Jeroen Dewulf,et al.  Integral resource management by exergy analysis for the selection of a separation process in the pharmaceutical industry , 2007 .

[10]  Concepción Jiménez-González,et al.  Expanding the Boundaries: Developing a Streamlined Tool for Eco-Footprinting of Pharmaceuticals , 2013 .

[11]  Stefanie Hellweg,et al.  Wind Power Electricity: The Bigger the Turbine, The Greener the Electricity? , 2012, Environmental science & technology.

[12]  Concepción Jiménez-González,et al.  Fast life cycle assessment of synthetic chemistry (FLASC™) tool , 2007 .

[13]  Mark A J Huijbregts,et al.  Power-law relationships for estimating mass, fuel consumption and costs of energy conversion equipments. , 2011, Environmental science & technology.

[14]  Bert Heirman,et al.  Reduced resource consumption through three generations of Galantamine·HBr synthesis , 2013 .

[15]  Jo Dewulf,et al.  A systematic evaluation of the resource consumption of active pharmaceutical ingredient production at three different levels. , 2011, Environmental science & technology.

[16]  Tomas Ekvall,et al.  Life cycle assessment – introduction and overview , 2005 .

[17]  Geoffrey P. Hammond,et al.  Industrial energy analysis, thermodynamics and sustainability , 2007 .

[18]  Rene Cornelissen,et al.  The value of the exergetic life cycle assessment besides the LCA , 2002 .

[19]  Konrad Hungerbühler,et al.  Life cycle assessment of fine chemical production: a case study of pharmaceutical synthesis , 2010 .

[20]  J Dewulf,et al.  Cumulative exergy extraction from the natural environment (CEENE): a comprehensive life cycle impact assessment method for resource accounting. , 2007, Environmental science & technology.

[21]  Alexei Lapkin,et al.  Green chemistry metrics: measuring and monitoring sustainable processes , 2008 .

[22]  Adisa Azapagic,et al.  Life cycle Assessment and its Application to Process Selection, Design and Optimisation , 1999 .

[23]  D. Morris,et al.  Standard chemical exergy of some elements and compounds on the planet earth , 1986 .

[24]  Gerald Rebitzer,et al.  The ecoinvent database system: a comprehensive web-based LCA database , 2005 .

[25]  José Manuel Amigo,et al.  Fast assessment of the surface distribution of API and excipients in tablets using NIR-hyperspectral imaging. , 2011, International journal of pharmaceutics.

[26]  Wouter De Soete,et al.  Exergetic sustainability assessment of batch versus continuous wet granulation based pharmaceutical tablet manufacturing: a cohesive analysis at three different levels† , 2013 .