A comprehensive scaling up technique for pneumatic transport systems

Avhandling (dr.ing.) - Hogskolen i Telemark / Norges teknisk-naturvitenskapelige universitet

[1]  Pertti Sarkomaa,et al.  An experimental study of vertical pneumatic conveying , 1999 .

[2]  D. V. Punwani,et al.  Review of design equations for dilute phase gas-solids horizontal conveying systems for coal and related materials , 1979 .

[3]  Stephen Pickering,et al.  A 1/4 scale test facility for PF transport in power station pipelines , 2004 .

[4]  Seiji Saito,et al.  Numerical simulation of electrostatic charge in powder pneumatic conveying process , 2003 .

[5]  Anuj Srivastava,et al.  Analysis of a frictional-kinetic model for gas-particle flow , 2003 .

[6]  Th. Frank,et al.  NUMERICAL SIMULATION AND EXPERIMENTAL INVESTIGATION OF A GAS-SOLID TWO-PHASE FLOW IN A HORIZONTAL CHANNEL , 1993 .

[7]  G. E. Klinzing,et al.  Dense phase plug flow transfer: The 1-inch horizontal flow , 1990 .

[8]  I. Bridle,et al.  An investigation into the effect of product type when scaling for diameter in vertical pipelines , 2000 .

[9]  Martin Sommerfeld,et al.  Modelling and numerical calculation of dilute-phase pneumatic conveying in pipe systems , 1998 .

[10]  Msa Bradley.  An Improved Method of Predicting Pressure Drop along Pneumatic Conveying Pipelines , 1989 .

[11]  A. Reed,et al.  An investigation into the effect of particle size on straight-pipe pressure gradients in lean-phase conveying , 2000 .

[12]  O. Molerus,et al.  Principles of Flow in Disperse Systems , 1993 .

[13]  Georges Balzer.  Gas–solid flow modelling based on the kinetic theory of granular media: validation, applications and limitations , 2000 .

[14]  S. Matsumoto,et al.  MINIMUM TRANSPORT VELOCITY FOR HORIZONTAL PNEUMATIC CONVEYING , 1975 .

[15]  Peter W Wypych,et al.  Pressure drop and slug velocity in low-velocity pneumatic conveying of bulk solids , 1997 .

[16]  H. Itō.  Pressure Losses in Smooth Pipe Bends , 1960 .

[17]  Harun Bilirgen,et al.  Prediction of pneumatic conveying flow phenomena using commercial CFD software , 1998 .

[18]  Martin Sommerfeld,et al.  Numerical calculation of particle transport in turbulent wall bounded flows , 2003 .

[19]  Glenn O. Brown.  The History of the Darcy-Weisbach Equation for Pipe Flow Resistance , 2002 .

[20]  Michael A. Adewumi,et al.  Two-dimensional steady state hydrodynamic analysis of gas—solids flow in vertical pneumatic conveying systems , 1986 .

[21]  Tron Solberg,et al.  Predictions of gas/particle flow with an Eulerian model including a realistic particle size distribution , 2000 .

[22]  J. S. Mason,et al.  Bulk Solids Handling: An Introduction to the Practice and Technology , 2011 .

[23]  Yuji Tomita,et al.  A Numerical Simulation of Swirling Flow Pneumatic Conveying in a Vertical Pipeline , 2000 .

[24]  Y. Tsuji,et al.  Fundamental investigation of plug conveying of cohesionless particles in a vertical pipe (pressure drop and friction of a stationary plug) , 1990 .

[25]  O. Molerus,et al.  Overview: Pneumatic transport of solids , 1996 .

[26]  T. Solberg,et al.  LASER-BASED FLOW MEASUREMENTS OF DILUTE VERTICAL PNEUMATIC TRANSPORT , 2004 .

[27]  G. Klinzing,et al.  Incipient motion of solid particles in horizontal pneumatic conveying , 1992 .

[28]  Aj Chambers,et al.  Pneumatic Conveying Calculations , 1986 .

[29]  Avi Levy,et al.  The effect of a bend on the particle cross-section concentration and segregation in pneumatic conveying systems , 1998 .

[30]  S. Sankar,et al.  Slip velocities in pneumatic transport part II , 1986 .

[31]  Peter W Wypych,et al.  Investigations into wall pressure during slug-flow pneumatic conveying , 1995 .

[32]  T. G. Troxel,et al.  Propel Your Pneumatic Conveying System to Higher Efficiency For new and existing installations, there are many system and component choices available. Here's how to narrow down the options to make the appropriate selection for optimal performance , 2001 .

[33]  Yuji Tomita,et al.  Phase diagrams in dense phase pneumatic transport , 1995 .

[35]  S. Stemerding,et al.  The pneumatic transport of cracking catalyst in vertical risers , 1962 .

[36]  Hamid Arastoopour,et al.  Numerical simulation and experimental analysis of gas/solid flow systems: 1999 Fluor-Daniel Plenary lecture , 2001 .

[37]  Minimum Transport for Dense-Phase Conveying of Granules , 2003 .

[38]  Dafydd Gibbon,et al.  1 User’s guide , 1998 .

[39]  Kinam Park,et al.  Effect of particle characteristics on particle pickup velocity , 2003 .

[40]  David Mills.  Optimizing pneumatic conveying , 2000 .

[41]  A. Zaltash,et al.  Pneumatic transport — a review (generalized phase diagram approach to pneumatic transport) , 1987 .

[42]  O. Molerus,et al.  Critical solids transport velocity with horizontal pneumatic conveying , 1985 .

[43]  Vedat Oruç,et al.  Flow frictional resistance in pneumatic conveying of solid particles through inclined lines , 2002 .

[44]  P. C. Arnold,et al.  On improving scale-up procedures for pneumatic conveying design , 1987 .

[45]  Francisco J. Cabrejos,et al.  Pickup and saltation mechanisms of solid particles in horizontal pneumatic transport , 1994 .

[46]  T. Jotaki,et al.  Feed rate characteristics of a blow tank solids conveyor in transport of granular material , 1980 .

[47]  Pan Ren-hu.  Scale-up Procedures for Pneumatic Conveying Design , 2005 .

[48]  L. S. Leung,et al.  Pneumatic Conveying of Solids: A Theoretical and Practical Approach , 1993 .

[49]  Yoshinobu Morikawa,et al.  LDV measurements of an air–-solid two-phase flow in a horizontal pipe , 1982, Journal of Fluid Mechanics.

[50]  F. A. Zenz.  Conveyability of Materials of Mixed Particle Size , 1964 .

[51]  Avi Levy,et al.  Two-fluid approach for plug flow simulations in horizontal pneumatic conveying , 2000 .

[52]  Wen-Ching Yang,et al.  A correlation for solid friction factor in vertical pneumatic conveying lines , 1978 .

[53]  R. Jackson,et al.  Frictional–collisional constitutive relations for granular materials, with application to plane shearing , 1987, Journal of Fluid Mechanics.

[54]  Y. Tsuji,et al.  Discrete particle simulation of two-dimensional fluidized bed , 1993 .

[55]  Mitsuaki Hirota,et al.  Effect of mechanical properties of powder on pneumatic conveying in inclined pipe , 2002 .

[56]  Shiqiu Gao,et al.  More fundamentals of dilute suspension collapse and choking for vertical conveying systems , 2001 .

[57]  Y. Tomita,et al.  A Numerical Simulation of Swirling Flow Pneumatic Conveying in a Horizontal Pipeline. , 1994 .

[58]  H. Arastoopour,et al.  Simulation of particles and gas flow behavior in the riser section of a circulating fluidized bed using the kinetic theory approach for the particulate phase , 2000 .

[59]  K. Nakamura,et al.  Vertical pneumatic conveying: An experimental study with particles in the intermediate and turbulent flow regimes , 1973 .

[60]  D. Gidaspow,et al.  Hydrodynamics of circulating fluidized beds: Kinetic theory approach , 1991 .

[61]  Jam Hans Kuipers,et al.  A numerical study of fluidization behavior of Geldart A particles using a discrete particle model , 2004 .

[62]  David Mills.  A review of the research work of Professor Predrag Marjanović , 2005 .

[63]  O. Mierka,et al.  Particle velocities in two-phase solid-gas flow , 1989 .

[64]  Harun Bilirgen,et al.  Mixing and dispersion of particle ropes in lean phase pneumatic conveying , 2001 .

[65]  Peter W Wypych,et al.  Pneumatic Conveying Characteristics of Fine and Granular Bulk Solids , 1994 .

[66]  Edward K. Levy,et al.  Roping phenomena in pulverized coal conveying lines , 1998 .

[67]  O. Molerus,et al.  Pneumatic transport of coarse grained particles in horizontal pipes , 1999 .

[68]  Svein Erlend Martinussen.  The Influence of the Physical Characteristics of Particulate Materials on their Conveyability in Pneumatic Transport Systems , 1996 .

[69]  S. Patankar.  Numerical Heat Transfer and Fluid Flow , 2018, Lecture Notes in Mechanical Engineering.

[72]  D. Pei,et al.  Particle Dynamics in Solids-Gas Flows in Vertical Pipe , 1969 .

[73]  Yoshinobu Morikawa,et al.  Lagrangian simulation of dilute gas-solid flows in a horizontal pipe , 1991 .

[74]  R. Jackson,et al.  Gas‐particle flow in a vertical pipe with particle‐particle interactions , 1989 .

[75]  K. Konrad,et al.  Dense-phase pneumatic conveying through long pipelines: effect of significantly compressible air flow on pressure drop , 1986 .

[76]  Sankaran Sundaresan,et al.  Electrical capacitance tomography measurements on vertical and inclined pneumatic conveying of granular solids , 2003 .

[77]  C. Wen.  Mechanics of Fluidization , 1966 .

[78]  B. K. Datta,et al.  PRESSURE DROP PREDICTION IN DENSE PHASE PNEUMATIC CONVEYING USING CFD , 2005 .

[79]  Peter W Wypych,et al.  Pressure drop prediction in low-velocity pneumatic conveying , 1994 .

[80]  Biplab K. Datta,et al.  A Simple Technique for Scaling Up Pneumatic Conveying Systems , 2003 .

[81]  D. Jeffrey,et al.  Kinetic theories for granular flow: inelastic particles in Couette flow and slightly inelastic particles in a general flowfield , 1984, Journal of Fluid Mechanics.

[82]  Yuji Tomita,et al.  Similarity of granular flow in a blow tank solids conveyor , 1982 .

[83]  The History of the Darcy-Weisbach Equation , 2007 .

[84]  Martin Sommerfeld,et al.  Analysis of collision effects for turbulent gas–particle flow in a horizontal channel: Part I. Particle transport , 2003 .

[85]  Yutaka Tsuji,et al.  Activities in discrete particle simulation in Japan , 2000 .

[86]  Wen-Ching Yang,et al.  A mathematical definition of choking phenomenon and a mathematical model for predicting choking velocity and choking voidage , 1975 .

[87]  Arild Saasen,et al.  A New Design Approach for of Pneumatic Conveying , 2003 .

[88]  Morten Christian Melaaen,et al.  A Unified Scaling-Up Technique for Pneumatic Conveying Systems , 2007 .

[89]  Marie Boas Hall,et al.  The Pneumatics of Hero of Alexandria , 1971 .

[90]  D. Geldart.  Types of gas fluidization , 1973 .

[91]  Avi Levy,et al.  A model for non-suspension gas–solids flow of fine powders in pipes , 2001 .

[92]  Avi Levy,et al.  A comparison of analytical and numerical models with experimental data for gas-solid flow through a straight pipe at different inclinations , 1997 .

[93]  P. W. Wypych,et al.  Pressure Drop Due to Solids-air Flow in Horizontal and Vertical Pipes , 1992 .

[94]  D. Gidaspow,et al.  A bubbling fluidization model using kinetic theory of granular flow , 1990 .

[95]  N. J. Mainwaring.  Characterization of materials for pneumatic conveying , 1993 .

[96]  R. Pan,et al.  Material properties and flow modes in pneumatic conveying , 1999 .

[97]  K. Stewartson.  Mechanics of fluids , 1978, Nature.

[98]  Msa Bradley,et al.  Pressure Drop In Pneumatic Conveying through Vertical Pipelines , 1992 .

[99]  Robert C. Brown,et al.  The contributions of attrition and fragmentation to char elutriation from fluidized beds , 1992 .

[100]  Y. Tomita,et al.  Measurements of Particle Velocity and Concentration for Dilute Swirling Gas-Solid Flow in a Vertical Pipe , 2002 .

[101]  Yoshinobu Morikawa,et al.  Numerical simulation of gas-solid two-phase flow in a two-dimensional horizontal channel , 1987 .

[102]  Peter W Wypych,et al.  Minimum transport boundary for horizontal dense-phase pneumatic conveying of granular materials , 2003 .

[103]  Shozaburo Saito,et al.  PNEUMATIC CONVEYING OF SOLIDS THROUGH STRAIGHT PIPES , 1969 .

[104]  P. W. Wypych.  Pneumatic conveying of bulk solids , 1989 .

[105]  J. Hair.  Multivariate data analysis , 1972 .

[106]  Jennifer L. Sinclair,et al.  Quantitative predictions of gas-particle flow in a vertical pipe with particle-particle interactions , 1995 .

[107]  Hamid Arastoopour,et al.  Analysis of vertical pneumatic conveying of solids using multiphase flow models , 1982 .

[109]  Weeratunge Malalasekera,et al.  An introduction to computational fluid dynamics - the finite volume method , 2007 .

[110]  Biplab K. Datta,et al.  A Possible Scaling-up Technique for Dense Phase Pneumatic Conveying , 2005 .

[111]  Wen-Ching Yang.  Correlations for solid friction factors in vertical and horizontal pneumatic conveyings , 1974 .

[112]  David G. Thomas.  Transport characteristics of suspensions: Part VI. Minimum transport velocity for large particle size suspensions in round horizontal pipes , 1962 .

[113]  Arild Saasen,et al.  Hole Cleaning and Pressure Loss Prediction From a Bulk Transport Perspective , 2005 .

[114]  J. Jenkins,et al.  A theory for the rapid flow of identical, smooth, nearly elastic, spherical particles , 1983, Journal of Fluid Mechanics.

[115]  B. L. Hinkle.  Acceleration of particles and pressure drops encountered in horizontal pneumatic conveying , 1953 .

[116]  H. Arastoopour,et al.  Particle—particle interaction force in a dilute gas—solid system , 1982 .

[117]  S. Crawford,et al.  Volume 1 , 2012, Journal of Diabetes Investigation.

[118]  R. G. Boothroyd,et al.  Flowing gas-solids suspensions , 1971 .

[119]  D. Gidaspow.  Multiphase Flow and Fluidization: Continuum and Kinetic Theory Descriptions , 1994 .

[120]  D. Mills.  Troubleshooting pneumatic conveying. II, Major systems and their key components , 1990 .

[121]  F Rizk.  Pneumatic Conveying Developments in the Last Century , 1992 .

[122]  Martin Sommerfeld,et al.  Characterization of the cross-sectional particle concentration distribution in pneumatic conveying systems , 1994 .

[123]  Further studies on flowing gas‐solids suspensions in a tube at high angles of inclination , 1994 .

[124]  O. Molerus,et al.  The influence of pipe geometry on the critical velocity of horizontal pneumatic conveying of coarse particles , 1985 .

[125]  A. Zaltash,et al.  A simplified correlation for solids friction factor in horizontal conveying systems based on Yang's unified theory , 1989 .

[126]  David J. Mason,et al.  A simulation system for pneumatic conveying systems , 1998 .

[127]  Aj Chambers,et al.  Scaling Pneumatic Conveying Characteristics for Pipeline Pressure , 1993 .