A robust ℋ∞ observer design for unknown input nonlinear systems: Application to fault diagnosis of a wind turbine

The paper is devoted to the problem of designing robust unknown input observer (UIO) for fault estimation purpose. The proposed approach is based on the Takagi-Sugeno models which can be effectively applied for modelling of the wide class of non-linear systems. It also revisits the recent results proposed in the literature and provides a less restrictive design procedure of a robust UIO. In particular, the general UIO strategy and the ℋ∞ framework are provided to design a robust fault estimation methodology. The resulting design procedure guarantees that a prescribed disturbance attenuation level is achieved with respect to the state estimation error. The main advantage of the proposed approach boils down to its simplicity because it reduces to solving a set of Linear Matrix Inequalities (LMIs). The final part of the paper presents an illustrative example devoted to the fault estimation of a three blade 1 MW variable-speed, variable-pitch wind turbine.

[1]  Marcin Mrugalski,et al.  Advanced Neural Network-Based Computational Schemes for Robust Fault Diagnosis , 2013, Studies in Computational Intelligence.

[2]  Kalyana Chakravarthy Veluvolu,et al.  Nonlinear sliding mode high-gain observers for fault estimation , 2011, Int. J. Syst. Sci..

[3]  Didier Theilliol,et al.  Fault-tolerant Control Systems: Design and Practical Applications , 2009 .

[4]  Pierre Apkarian,et al.  Parameterized linear matrix inequality techniques in fuzzy control system design , 2001, IEEE Trans. Fuzzy Syst..

[5]  Hamid Reza Karimi,et al.  Robust Observer Design for Unknown Inputs Takagi–Sugeno Models , 2013, IEEE Transactions on Fuzzy Systems.

[6]  Thomas Frei,et al.  Active Fault Tolerant Control Systems Stochastic Analysis And Synthesis , 2016 .

[7]  J. Geromel,et al.  A new discrete-time robust stability condition , 1999 .

[8]  Ali Zemouche,et al.  Observers for a class of Lipschitz systems with extension to Hinfinity performance analysis , 2008, Syst. Control. Lett..

[9]  Hassan Hammouri,et al.  Observer-based approach to fault detection and isolation for nonlinear systems , 1999, IEEE Trans. Autom. Control..

[10]  Kazuo Tanaka,et al.  An approach to fuzzy control of nonlinear systems: stability and design issues , 1996, IEEE Trans. Fuzzy Syst..

[11]  M. Darouach,et al.  Two-stage Kalman estimator with unknown exogenous inputs , 1999, Autom..

[12]  Guillaume Ducard,et al.  Fault-tolerant Flight Control and Guidance Systems: Practical Methods for Small Unmanned Aerial Vehicles , 2009 .

[13]  Józef Korbicz,et al.  Towards Robust Neural-Network-Based Sensor and Actuator Fault Diagnosis: Application to a Tunnel Furnace , 2014, Neural Processing Letters.

[14]  Hong Wang,et al.  Design of fault diagnosis filters and fault-tolerant control for a class of nonlinear systems , 2001, IEEE Trans. Autom. Control..

[15]  Marios M. Polycarpou,et al.  Fault diagnosis of a class of nonlinear uncertain systems with Lipschitz nonlinearities using adaptive estimation , 2010, Autom..

[16]  Marcin Witczak Modelling and Estimation Strategies for Fault Diagnosis of Non-Linear Systems: From Analytical to Soft Computing Approaches , 2007 .

[17]  Marcin Witczak,et al.  Fault Diagnosis and Fault-Tolerant Control Strategies for Non-Linear Systems: Analytical and Soft Computing Approaches , 2013 .

[18]  Michio Sugeno,et al.  Fuzzy identification of systems and its applications to modeling and control , 1985, IEEE Transactions on Systems, Man, and Cybernetics.

[19]  Bart De Moor,et al.  Unbiased minimum-variance input and state estimation for linear discrete-time systems , 2007, Autom..

[20]  Vicenç Puig,et al.  LMI-based strategies for designing observers and unknown input observers for non-linear discrete-time systems , 2007 .

[21]  Vicenç Puig,et al.  Fault diagnosis and fault tolerant control using set-membership approaches: Application to real case studies , 2010, Int. J. Appl. Math. Comput. Sci..

[22]  Karolos M. Grigoriadis,et al.  Robust fault estimation of uncertain systems using an LMI‐based approach , 2008 .

[23]  Marcin Witczak,et al.  Fault Diagnosis and Fault-Tolerant Control Strategies for Non-Linear Systems , 2014 .

[24]  Thierry-Marie Guerra,et al.  Discrete Tagaki-Sugeno models for control: Where are we? , 2009, Annu. Rev. Control..

[25]  Mohammed Chadli,et al.  Fuzzy model based multivariable predictive control of a variable speed wind turbine: LMI approach , 2012 .

[26]  P. Dorato,et al.  Observing the states of systems with unmeasurable disturbances , 1975 .

[27]  Guillaume Ducard,et al.  Fault-tolerant Flight Control and Guidance Systems , 2009 .

[28]  Tomasz Szulc,et al.  Convex combinations of matrices — Full rank characterization , 1999 .

[29]  Hassan Hammouri,et al.  Failure diagnosis and nonlinear observer. Application to a hydraulic process , 2002, J. Frankl. Inst..

[30]  Guo-Ping Liu,et al.  Optimal residual design for fault diagnosis using multi-objective optimization and genetic algorithms , 1996, Int. J. Syst. Sci..

[31]  Paul M. Frank,et al.  Diagnosis strategies and systems: principles, fuzzy and neural approaches , 2000 .

[32]  Damiano Rotondo,et al.  Robust Quasi–LPV Model Reference FTC of a Quadrotor Uav Subject to Actuator Faults , 2015, Int. J. Appl. Math. Comput. Sci..

[33]  Marcin Mrugalski,et al.  An unscented Kalman filter in designing dynamic GMDH neural networks for robust fault detection , 2013, Int. J. Appl. Math. Comput. Sci..

[34]  Kazuo Tanaka,et al.  Fuzzy Control Systems Design and Analysis: A Linear Matrix Inequality Approach , 2008 .

[35]  Rolf Isermann,et al.  Fault-Diagnosis Applications: Model-Based Condition Monitoring: Actuators, Drives, Machinery, Plants, Sensors, and Fault-tolerant Systems , 2011 .

[36]  Minyue Fu,et al.  A linear matrix inequality approach to robust H∞ filtering , 1997, IEEE Trans. Signal Process..