Effective non-reflective boundary for Lamb waves: Theory, finite element implementation, and applications

Abstract This article presents a new approach to designing non-reflective boundary (NRB) for inhibiting Lamb wave reflections at structural boundaries. Our NRB approach can be effectively and conveniently implemented in commercial finite element (FE) codes. The paper starts with a review of the state of the art: (a) the absorbing layers by increasing damping (ALID) approach; and (b) the Lysmer–Kuhlemeyer absorbing boundary conditions (LK ABC) approach is briefly presented and its inadequacy for Lamb wave applications is explained. Hence, we propose a modified Lysmer–Kuhlemeyer approach to be used in the NRB design for Lamb wave problems; we call our approach MLK NRB. The implementation of this MLK NRB was realized using the spring–damper elements which are available in most commercial FE codes. Optimized implementation parameters are developed in order to achieve the best performance for Lamb wave absorption. Our MLK NRB approach is compared with the state of the art ALID and LK ABC methods. Our MLK NRB shows better performance than ALID and LK ABC for all Lamb modes in the thin-plate structures considered in our examples. Our MLK NRB approach is also advantageous at low frequencies and at cut-off frequencies, where extremely long wavelengths exist. A comprehensive study with various design parameters and plate thicknesses which illustrates the advantages and limitations of our MLK NRB approach is presented. MLK NRB applications for both transient analysis in time domain and harmonic analysis in frequency domain are illustrated. The article finishes with conclusions and suggestions for future work.

[1]  Alexander Velichko,et al.  Accurate finite element modelling of guided wave scattering from irregular defects , 2012 .

[2]  U. Gabbert,et al.  Non-reflecting boundary condition for Lamb wave propagation problems in honeycomb and CFRP plates using dashpot elements , 2013 .

[3]  L. Lenti,et al.  A simple multi‐directional absorbing layer method to simulate elastic wave propagation in unbounded domains , 2010, 1009.1002.

[4]  M. Castaings,et al.  Finite element predictions for the dynamic response of thermo-viscoelastic material structures , 2004 .

[5]  Christophe Bacon,et al.  Finite element modeling of torsional wave modes along pipes with absorbing materials , 2006 .

[6]  John B. Schneider,et al.  Application of the perfectly matched layer (PML) absorbing boundary condition to elastic wave propagation , 1996 .

[7]  Laurence J. Jacobs,et al.  Modeling elastic wave propagation in waveguides with the finite element method , 1999 .

[8]  P. Cawley,et al.  The interaction of Lamb waves with defects , 1992, IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control.

[9]  Zheng Fan,et al.  Interaction of weld-guided waves with defects , 2012 .

[10]  S. Orszag,et al.  Approximation of radiation boundary conditions , 1981 .

[11]  L. John,et al.  Finite dynamic model for infinite media , 1969 .

[12]  Victor Giurgiutiu,et al.  WFR-2D: an analytical model for PWAS-generated 2D ultrasonic guided wave propagation , 2014, Smart Structures.

[13]  W. Ke,et al.  3D finite element simulations of an air-coupled ultrasonic NDT system , 2009 .

[14]  Yanfeng Shen,et al.  STRUCTURAL HEALTH MONITORING USING LINEAR AND NONLINEAR ULTRASONIC GUIDED WAVES , 2014 .

[15]  Jean-Pierre Berenger,et al.  A perfectly matched layer for the absorption of electromagnetic waves , 1994 .

[16]  M J S Lowe,et al.  A Stiffness Reduction Method for efficient absorption of waves at boundaries for use in commercial Finite Element codes. , 2014, Ultrasonics.

[17]  Prabhu Rajagopal,et al.  On the use of absorbing layers to simulate the propagation of elastic waves in unbounded isotropic media using commercially available Finite Element packages , 2012 .

[18]  E. A. Skelton,et al.  Guided elastic waves and perfectly matched layers , 2007 .

[19]  Gui-Rong Liu,et al.  A non-reflecting boundary for analyzing wave propagation using the finite element method , 2003 .

[20]  J. Rose.  Ultrasonic Waves in Solid Media , 1999 .

[21]  Peter Cawley,et al.  Efficient Numerical Modelling of Absorbing Regions for Boundaries Of Guided Waves Problems , 2006 .

[22]  杜义欣,et al.  3D viscous-spring artificial boundary in time domain , 2006 .

[23]  Victor Giurgiutiu,et al.  Book Review: STRUCTURAL HEALTH MONITORING WITH PIEZOELECTRIC WAFER ACTIVE SENSORS by VICTOR GIURGIUTIU - University of South Carolina © ELSEVIER - Academic Press, 2008, pp. 747 , 2012 .

[24]  D. Givoli.  High-order local non-reflecting boundary conditions: a review☆ , 2004 .