Study of UV-bleached channel-waveguide performance in nonlinear optical polymer films.

We report studies on UV-photobleached optical channel waveguides in nonlinear optical polymer films. The nonlinear optical polymer used is poly(methyl methacrylate)/DR1 side-chain polymer. The effective indices of the channel waveguides are measured with the prism-coupling technique, along with the effective indices of bleached and unbleached polymer films. The effective-index method was used to predict the effective indices of the channel waveguides from measurements of the slab waveguides, without detailed knowledge of the index distributions in the polymer films. Some local stress-related effects on the boundaries of the channel waveguides caused by the UV-bleaching process are identified by comparison between direct channel measurement and prediction. It is found that the technique used in this study can be employed to predict the performance of channel waveguides processed such that they have no excessive internal stress distributions.

[1]  P. Lagasse,et al.  Finite Element Analysis of Optical Waveguides , 1980, 1980 IEEE MTT-S International Microwave symposium Digest.

[2]  M. S. Stern.  Semivectorial polarised finite difference method for optical waveguides with arbitrary index profiles , 1988 .

[3]  P. F. Heidrich,et al.  Optical waveguide refractive index profiles determined from measurement of mode indices: a simple analysis. , 1976, Applied optics.

[4]  Mart B. J. Diemeer,et al.  Photoinduced channel waveguide formation in nonlinear optical polymers , 1990 .

[5]  R Ulrich,et al.  Measurement of thin film parameters with a prism coupler. , 1973, Applied optics.

[6]  S. Imamura,et al.  Polymer channel waveguides with low loss at 1.3 mu m , 1991 .

[7]  P. E. Lagasse,et al.  Finite Element Analysis Waveguides of Optical , 1981 .

[8]  B. Rahman.  Finite Element Analysis of Optical Waveguides , 1995, Progress In Electromagnetics Research.

[9]  T. Kurihara,et al.  Third‐order optical nonlinearities of a processable main chain polymer with symmetrically substituted tris‐azo dyes , 1992 .

[10]  Marc A. Stiller.  Excimer laser fabrication of waveguide devices , 1991, Other Conferences.

[11]  Pao-Lo Liu,et al.  Semivectorial beam-propagation method for analyzing polarized modes of rib waveguides , 1992 .

[12]  R. J. Martin,et al.  MODES OF PROPAGATING LIGHT WAVES IN THIN DEPOSITED SEMICONDUCTOR FILMS , 1969 .

[13]  W. Burns,et al.  Mode dispersion in diffused channel waveguides by the effective index method. , 1977, Applied optics.

[14]  M. Tacke,et al.  Properties of polymeric thin films by integrated optical techniques , 1977 .

[15]  Ramu V. Ramaswamy,et al.  Ion-exchanged glass waveguides: a review , 1988 .

[16]  D. Misemer,et al.  Nonuniform photobleaching of dyed polymers for optical waveguides , 1993 .

[17]  George I. Stegeman,et al.  Fabrication of integrated optical structures in polydiacetylene films by irreversible photoinduced bleaching , 1989 .

[18]  J. Schmidtchen,et al.  Error analysis for refractive-index profile determination from near-field measurements , 1990 .

[19]  W. Charczenko.  Coupled Mode Analysis, Fabrication, and Characterization of Microwave Integrated Optical Devices , 1990 .