Maximum fundamental frequency of thick laminated composite plates by a hybrid optimization method

Abstract As a first attempt, a combined method is introduced to obtain maximum fundamental frequency of thick laminated composite plates via finding optimum fibers orientation. The governing equations are obtained based on the higher order shear deformation theory (HSDT). The robust and accurate finite element method (FEM) is used to discretize the governing equations. The transferred form of the equations in frequency domain is obtained and the fundamental frequency of the plate is achieved. High sensitivity of the problem with the fibers orientations is shown. To find the optimum fibers orientation of the thick plate a mixed implementable evolutionary algorithm is used. In the proposed genetic algorithms (GAs) base method, particle swarm optimization (PSO) method is added to improve specified percent of GAs population. Applicability and usefulness of the method is demonstrated by solving different examples.

[1]  Yoshihiro Narita,et al.  Maximizing the fundamental frequency of laminated cylindrical panels using layerwise optimization , 2006 .

[2]  Yoshihiro Narita,et al.  Multi-objective optimization of curvilinear fiber shapes for laminated composite plates by using NSGA-II , 2013 .

[3]  Y. Narita Layerwise optimization for the maximum fundamental frequency of laminated composite plates , 2003 .

[4]  J. Hodgkinson,et al.  Layerwise optimisation for maximising the fundamental frequencies of point-supported rectangular laminated composite plates , 2005 .

[5]  J. Reddy An introduction to the finite element method , 1989 .

[6]  Dervis Karaboga,et al.  The Artificial Bee Colony algorithm in layer optimization for the maximum fundamental frequency of symmetrical laminated composite plates , 2014 .

[7]  Yoshihiro Narita,et al.  Frequency maximization of laminated sandwich plates under general boundary conditions using layerwise optimization method with refined zigzag theory , 2013 .

[8]  P. B. Sujit,et al.  Particle swarm optimization approach for multi-objective composite box-beam design , 2007 .

[9]  Umut Topal,et al.  Frequency optimization of laminated folded composite plates , 2009 .

[10]  Mohammad Reza Nikoo,et al.  Maximum fundamental frequency and thermal buckling temperature of laminated composite plates by a new hybrid multi-objective optimization technique , 2015 .

[11]  Riccardo Poli,et al.  Particle swarm optimization , 1995, Swarm Intelligence.

[12]  M. Apalak,et al.  Layer optimisation for maximum fundamental frequency of laminated composite plates for different edge conditions , 2008 .

[13]  Hsuan-Teh Hu,et al.  Maximization of fundamental frequency of axially compressed laminated curved panels with cutouts , 2013 .

[14]  P. Malekzadeh,et al.  Thermal Buckling Optimization of Temperature-Dependent Laminated Composite Skew Plates , 2014 .

[15]  M. H. Sadr,et al.  Optimization of laminated composite plates for maximum fundamental frequency using Elitist-Genetic algorithm and finite strip method , 2011, Journal of Global Optimization.

[16]  David E. Goldberg,et al.  Genetic Algorithms in Search Optimization and Machine Learning , 1988 .

[17]  J. Reddy Mechanics of laminated composite plates : theory and analysis , 1997 .

[18]  Lawrence. Davis,et al.  Handbook Of Genetic Algorithms , 1990 .

[19]  Umut Topal,et al.  Frequency optimization of laminated composite angle-ply plates with circular hole , 2008 .

[20]  A. R. Vosoughi,et al.  New hybrid FE-PSO-CGAs sensitivity base technique for damage detection of laminated composite beams , 2014 .

[21]  Tai-Yan Kam,et al.  Design of laminated composite plates for optimal dynamic characteristics using a constrained global optimization technique , 1995 .

[22]  Alireza Jafari,et al.  Multiobjective optimization of orthogonally stiffened cylindrical shells for minimum weight and maximum axial buckling load , 2010 .

[23]  Mahmoud Shakeri,et al.  Multi-objective stacking sequence optimization of laminated cylindrical panels using a genetic algorithm and neural networks , 2007 .

[24]  Yoshihiro Narita,et al.  Discrete Optimization for Vibration Design of Composite Plates by Using Lamination Parameters , 2009 .

[25]  Yoshihiro Narita,et al.  Maximum frequency design of laminated plates with mixed boundary conditions , 2006 .