On the applicability of the load separation criterion in determining the fracture resistance (JIc) of ductile polymers at low and high loading rates

[1]  Jesús Rodríguez,et al.  The use of the load separation parameter Spb method to determine the J–R curves of polypropylenes , 2008 .

[2]  Xian-Kui Zhu,et al.  J–Resistance curve testing of HY80 steel using SE(B) specimens and normalization method , 2007 .

[3]  F. Baldi,et al.  High-rate J-testing of toughened polyamide 6/6: Applicability of the load separation criterion and the normalization method , 2005 .

[4]  P. Frontini,et al.  J-R curve determination using the load separation parameter Spb method for ductile polymers , 2004 .

[5]  J. Velasco,et al.  J-R curve determination of magnesium hydroxide filled polypropylene using the normalization method , 2002 .

[6]  J. G. Williams,et al.  Fracture Mechanics Testing Methods for Polymers, Adhesives and Composites , 2001 .

[7]  P. Montemartini,et al.  The use of load separation criterion and normalization method in ductile fracture characterization of thermoplastic polymers , 1996 .

[8]  J. Landes,et al.  Application of load separation and normalization methods for polycarbonate materials , 1993 .

[9]  M. H. Sharobeam,et al.  The load separation and ηpl , 1993 .

[10]  M. H. Sharobeam,et al.  The load separation andηpl development in precracked specimen test recordsdevelopment in precracked specimen test records , 1993 .

[11]  J. Williams,et al.  Fracture characterization of tough polymers using the J method , 1986 .

[12]  J. Williams,et al.  A fracture toughness study on low density and linear low density polyethylenes , 1986 .

[13]  F. Ramsteiner,et al.  J-Fracture toughness of polymers at slow speed , 2001 .

[14]  J. G. Williams,et al.  Introduction to linear elastic fracture mechanics , 2001 .

[15]  C. Bernal,et al.  A simple method for J-R curve determination in ABS polymers , 1995 .

[16]  J. Landes,et al.  J-R curve calculation with the normalization method for toughened polymers , 1994 .

[17]  John D. Landes,et al.  The load separation criterion and methodology in ductile fracture mechanics , 1991 .

[18]  Zhonghua Li,et al.  Stress triaxiality in crack tip regions of bend specimens with different crack-depth and fracture criterion at initiation , 1990 .

[19]  J. G. Williams,et al.  Fracture Mechanics of Polymers , 1984 .

[20]  Pc Paris,et al.  Estimations on J-integral and tearing modulus T from a single specimen test record , 1981 .

[21]  Pc Paris,et al.  A J-Integral Approach to Development of η -Factors , 1980 .

[22]  C. Turner,et al.  Method for Laboratory Determination of J c , 1976 .

[23]  J. Begley,et al.  Test Results from J-Integral Studies: An Attempt to Establish a J Ic Testing Procedure , 1974 .

[24]  John R. Rice,et al.  Some further results of J-integral analysis and estimates. , 1973 .