Design and Process Optimization of a Sintered Joint for Power Electronics Automotive Applications

The massive development of Hybrid and Electrical Vehicles (HEV) is strongly impacting the semiconductor industry demanding for highly reliable Power Electronic components. Within the engine compartment installation space is of major concern, therefore small size and high integration level of the modules are needed. Conventionally devices are typically soldered to ceramics substrates that are vacuum soldered to water-cooled base plates. The known reliability limitations of traditional solder joints are significantly limiting the power density increase, limiting the maximum operative temperature and representing a strong constrain for using high performances devices such as wide bandgap compound like Silicon Carbide (SiC). Silver sintering today has started to replace the solder joint from chips to carrier substrates, leaving one major reliability bottleneck. Combining properly temperature, time and pressure, a strong, highly electrically and thermally conductive bond is formed. The aim of this work is to develop an integrated methodology, numerical and experimental, to assess the Ag sintering die attach process for a SiC power MOSFET. Different process parameters have been benchmarked by means of physical analyses, performed at time zero and also after liquid-to-liquid thermal shock aging test. The sintering flakes densification process has been reproduced by Finite Element Analysis and the obtained morphological texture has been used for extracting the mechanical properties of the layer as a function of the thermo-compression process itself. A simulation method, based on the evaluation of the inelastic strain accounted per cycle has been used for matching the experimental results according to an aging model.

[1]  Yifei Luo,et al.  Failure Mechanism of Die-Attach Solder Joints in IGBT Modules Under Pulse High-Current Power Cycling , 2019, IEEE Journal of Emerging and Selected Topics in Power Electronics.

[2]  Andreas Schletz,et al.  Reliability assessment of sintered nano-silver die attachment for power semiconductors , 2010, 2010 12th Electronics Packaging Technology Conference.

[3]  Andreas Fix,et al.  Failure mechanisms of sintered silver interconnections for power electronic applications , 2013, 2013 IEEE 63rd Electronic Components and Technology Conference.

[4]  Klaus-Dieter Lang,et al.  Interface degradation of Al heavy wire bonds on power semiconductors during active power cycling measured by the shear test , 2010, 2010 6th International Conference on Integrated Power Electronics Systems.

[5]  Norbert Hofmann,et al.  The influence of thermal cycling methods on the interconnection reliability evaluation within IGBT modules , 2012, 2012 4th Electronic System-Integration Technology Conference.

[6]  C. Gobl,et al.  Low temperature sinter technology die attachment for power electronic applications , 2010, 2010 6th International Conference on Integrated Power Electronics Systems.

[7]  Michele Calabretta,et al.  Mechanical and electrical characterization of CVD-grown graphene transferred on chalcogenide Ge2Sb2Te5 layers , 2018, Carbon.

[8]  Domenico Guida,et al.  Finite element analysis on squeal-noise in railway applications , 2018 .

[9]  J. Wilde,et al.  Assessment of thermo-mechanical stresses in Low Temperature Joining Technology , 2012, 2012 13th International Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems.

[10]  B. Wunderle,et al.  Silver Sintering in Power Electronics: The State of the Art in Material Characterization and Reliability Testing , 2018, 2018 7th Electronic System-Integration Technology Conference (ESTC).

[11]  G. Lu,et al.  Characterization of Low-Temperature Sintered Nanoscale Silver Paste for Attaching Semiconductor Devices , 2005, 2005 Conference on High Density Microsystem Design and Packaging and Component Failure Analysis.

[12]  S. Rzepka,et al.  Reliability issues for high temperature interconnections based on transient liquid phase soldering , 2013, 2013 14th International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems (EuroSimE).

[13]  R. Doring,et al.  Combined experimental- and FE-studies on sinter-Ag behaviour and effects on IGBT-module reliability , 2014, 2014 15th International Conference on Thermal, Mechanical and Mulit-Physics Simulation and Experiments in Microelectronics and Microsystems (EuroSimE).

[14]  H. Schwarzbauer,et al.  Novel large area joining technique for improved power device performance , 1989, Conference Record of the IEEE Industry Applications Society Annual Meeting,.

[15]  Alessandro Sitta,et al.  Fast transient thermomechanical stress to set a pressure-assisted sintering process , 2019, 2019 15th Conference on Ph.D Research in Microelectronics and Electronics (PRIME).

[16]  Michele Calabretta,et al.  Solder Joint Reliability: Thermo-mechanical analysis on Power Flat Packages , 2017 .

[17]  Ludwig Josef Balk,et al.  Scanning acoustic microscopy , 1986 .

[18]  M. Oliveri,et al.  Mechanical properties of amorphous Ge2Sb2Te5 thin layers , 2018, Surface and Coatings Technology.

[19]  Wolfgang Schmitt,et al.  Silver sinter paste for SiC bonding with improved mechanical properties , 2017, 2017 21st European Microelectronics and Packaging Conference (EMPC) & Exhibition.

[20]  Cheong Choke Fei,et al.  Temperature cycling and thermal shock correlation in DPAK & DSO packages , 2012, 2012 10th IEEE International Conference on Semiconductor Electronics (ICSE).

[21]  Andreas Schletz,et al.  Power semiconductor joining through sintering of silver nanoparticles: Evaluation of influence of parameters time, temperature and pressure on density, strength and reliability , 2010, 2010 6th International Conference on Integrated Power Electronics Systems.

[22]  Ahmed A. Shabana,et al.  Development of ANCF tetrahedral finite elements for the nonlinear dynamics of flexible structures , 2017 .

[23]  Gaetano Bazzano,et al.  Thermal Analysis Approach for Predicting Power Device Lifetime , 2019, IEEE Transactions on Device and Materials Reliability.

[24]  J. Lutz,et al.  Power cycling methods for SiC MOSFETs , 2017, 2017 29th International Symposium on Power Semiconductor Devices and IC's (ISPSD).

[25]  S. Klaka,et al.  Reduction of thermomechanical stress by applying a low temperature joining technique , 1994, Proceedings of the 6th International Symposium on Power Semiconductor Devices and Ics.

[26]  Giuseppe Greco,et al.  Numerical approach to predict power device reliability , 2018, 2018 13th International Conference on Design & Technology of Integrated Systems In Nanoscale Era (DTIS).