Analytical Force, Stiffness, and Resonance Frequency Calculations of a Magnetic Vibration Isolator for a Microbalance

The accuracy of a microbalance is highly dependent on the level of floor vibrations. One strategy to reduce floor vibrations is a magnetic vibration isolator. Magnetic vibration isolators have the possibility to obtain a zero-stiffness region, which is beneficial for attenuating vibrations. In this paper, a 3-D analytical magnetic surface charge model is used to calculate the spring characteristics of a cone-shaped magnetic vibration isolator for different angles.

[1]  M. Takasaki,et al.  An Active Micro Vibration Isolator with Zero-Power Controlled Magnetic Suspension Technology , 2006 .

[2]  Jlg Jeroen Janssen,et al.  Analytical force and stiffness calculations for magnetic bearings and vibration isolation , 2009 .

[3]  Blj Bart Gysen,et al.  Non-linear full-car modeling and sky-hook control for a direct-drive active suspension system , 2013 .

[4]  Abdelmounaïm Tounzi,et al.  Analytical calculation of interaction force between orthogonally magnetized permanent magnets , 2009 .

[5]  Johannes J. H. Paulides,et al.  Relative Permeability in a 3D Analytical Surface Charge Model of Permanent Magnets , 2013, IEEE Transactions on Magnetics.

[6]  L. Encica,et al.  High-performance moving-coil actuators with double-sided PM arrays: A design comparison , 2010, 2010 International Conference on Electrical Machines and Systems.

[7]  L. Encica,et al.  A Framework for Efficient Automated Optimal Design of Electromagnetic Actuators , 2006, 2006 12th Biennial IEEE Conference on Electromagnetic Field Computation.

[8]  E.A. Lomonova,et al.  Modeling the Effects of Magnetization Variations on a Permanent Magnet Based Levitation or Vibration Isolation System , 2013 .

[9]  A. Zander,et al.  A multipole array magnetic spring , 2005, IEEE Transactions on Magnetics.

[10]  K. Nagaya,et al.  A noncontact permanent magnet levitation table with electromagnetic control and its vibration isolation method using direct disturbance cancellation combining optimal regulators , 1995 .

[11]  S. Earnshaw.  On the Nature of the Molecular Forces which Regulate the Constitution of the Luminiferous Ether , .

[12]  William H. Robertson,et al.  Theoretical analysis of a non-contact spring with inclined permanent magnets for load-independent re , 2012 .

[13]  M. Takasaki,et al.  Vibration isolation system combining zero-power magnetic suspension with springs , 2007 .

[14]  E. Lomonova,et al.  Study of magnetic gravity compensator topologies using an abstraction in the analytical interaction equations , 2012 .

[15]  G. Akoun,et al.  3D analytical calculation of the forces exerted between two cuboidal magnets , 1984 .

[16]  S. R. Emadian,et al.  Coulombian Model for 3D Analytical Calculation of the Torque Exerted on Cuboidal Permanent Magnets with Arbitrary Oriented Polarizations , 2011 .