Multiscale modelling potentialities for solid oxide fuel cell performance and degradation analysis
暂无分享,去创建一个
[1] B. Bosio,et al. Test and Modelling of Solid Oxide Fuel Cell Durability: A Focus on Interconnect Role on Global Degradation , 2022, Energies.
[2] S. Delsante,et al. Volatilization of chromium from AISI 441 stainless steel: Time and temperature dependence , 2022, Surface and Coatings Technology.
[3] Ennio Andrea Adinolfi,et al. Addressing planar solid oxide cell degradation mechanisms: A critical review of selected components , 2021, Electrochemical Science Advances.
[4] A. Hagen,et al. Electrochemical Characterization and Modelling of Anode and Electrolyte Supported Solid Oxide Fuel Cells , 2021, Frontiers in Energy Research.
[5] S. Jensen,et al. Ni migration in solid oxide cell electrodes: Review and revised hypothesis , 2021, Fuel Cells.
[6] D. Grolimund,et al. Oxygen electrode degradation in solid oxide cells operating in electrolysis and fuel cell modes: LSCF destabilization and interdiffusion at the electrode/electrolyte interface , 2021 .
[7] A. Nakajo,et al. Modeling Nickel Microstructural Evolution in Ni-YSZ Electrodes Using a Mathematical Morphology Approach , 2021, ECS Meeting Abstracts.
[8] J. Debayle,et al. A Dynamic Multi-Scale Model for Solid Oxide Cells Validated on Local Current Measurements: Impact of Global Cell Operation on the Electrodes Reaction Mechanisms , 2021, ECS Meeting Abstracts.
[9] H. Frandsen,et al. Multiscale modeling of degradation of full solid oxide fuel cell stacks , 2021, International Journal of Hydrogen Energy.
[10] L. Barelli,et al. Early-Stage Detection of Solid Oxide Cells Anode Degradation by Operando Impedance Analysis , 2021, Processes.
[11] C. Pianese,et al. Development of mathematical transfer functions correlating Solid Oxide Fuel Cell degradation to operating conditions for Accelerated Stress Test protocols design , 2021 .
[12] E. Siebert,et al. An Elementary Kinetic Model for the LSCF and LSCF-CGO Electrodes of Solid Oxide Cells: Impact of Operating Conditions and Degradation on the Electrode Response , 2021 .
[13] Haoran Xu,et al. Advancing the multiscale understanding on solid oxide electrolysis cells via modelling approaches: A review , 2021 .
[14] Zongping Shao,et al. Development of nickel based cermet anode materials in solid oxide fuel cells – Now and future , 2020 .
[15] C. Geipel,et al. Characterization of metallic interconnects extracted from Solid Oxide Fuel Cell stacks operated up to 20,000 h in real life conditions: The fuel side , 2020, International Journal of Hydrogen Energy.
[16] N. Menzler,et al. Post-test characterization of a solid oxide fuel cell after more than 10 years of stack testing , 2020 .
[17] C. Pianese,et al. Coupling electrochemical impedance spectroscopy and model-based aging estimation for solid oxide fuel cell stacks lifetime prediction , 2020, Applied Energy.
[18] L. Barelli,et al. Multiscale Modeling for Reversible Solid Oxide Cell Operation , 2020, Energies.
[19] B. Bosio,et al. Solid Oxide Fuel Cell Performance Analysis through Local Modelling , 2020, Catalysts.
[20] W. J. Quadakkers,et al. Long-term operation of solid oxide fuel cells and preliminary findings on accelerated testing , 2020 .
[21] L. Barelli,et al. Optimization of a Reference Kinetic Model for Solid Oxide Fuel Cells , 2020 .
[22] P. Cloetens,et al. Impact of Microstructure and Polarization on the Degradation of Ni-YSZ Electrode: An Experimental and Modeling Approach , 2019, ECS Transactions.
[23] T. Matsui,et al. Degradation Analysis of Solid Oxide Fuel Cells with (La,Sr)(Co,Fe)O3-δ Cathode/Gd2O3–CeO2 Interlayer/Y2O3–ZrO2 Electrolyte System: The Influences of Microstructural Change and Solid Solution Formation , 2019, ECS Transactions.
[24] Tohru Yamamoto,et al. Degradation Analysis of SOFC Performance (1) — Severe Operation with High Fuel Utilization , 2019, ECS Transactions.
[25] Shinji Kimijima,et al. A Multiscale Approach to the Numerical Simulation of the Solid Oxide Fuel Cell , 2019, Catalysts.
[26] R. Sharma,et al. Microstructural correlations for specific surface area and triple phase boundary length for composite electrodes of solid oxide cells , 2019, Journal of Power Sources.
[27] B. Bosio,et al. A 2-D model for Intermediate Temperature Solid Oxide Fuel Cells Preliminarily Validated on Local Values , 2019 .
[28] Zijing Lin,et al. Degradations of the electrochemical performance of solid oxide fuel cell induced by material microstructure evolutions , 2018, Applied Energy.
[29] Z. Stoynov,et al. Differential analysis of SOFC current-voltage characteristics , 2018, Applied Energy.
[30] P. Cloetens,et al. Impact of Nickel agglomeration on Solid Oxide Cell operated in fuel cell and electrolysis modes , 2018, Journal of Power Sources.
[31] Jong‐Won Lee,et al. A simplified approach to predict performance degradation of a solid oxide fuel cell anode , 2018, Journal of Power Sources.
[32] Meilin Liu,et al. An effective strategy to enhancing tolerance to contaminants poisoning of solid oxide fuel cell cathodes , 2018 .
[33] A. Thorel,et al. Differential Resistance Analysis – a New Tool for Evaluation of Solid Oxide Fuel Cells Degradation , 2017 .
[34] Alan S. Fung,et al. Macro-level modeling of solid oxide fuel cells, approaches, and assumptions revisited , 2017 .
[35] H. Iwai,et al. Chromium poisoning in (La,Sr)MnO3 cathode: Three-dimensional simulation of a solid oxide fuel cell , 2016 .
[36] Barbara Bosio,et al. Extension of an effective MCFC kinetic model to a wider range of operating conditions , 2016 .
[37] Zongping Shao,et al. Multiscale model for solid oxide fuel cell with electrode containing mixed conducting material , 2015 .
[38] P. Cloetens,et al. Reactive Mechanisms of LSCF Single-Phase and LSCF-CGO Composite Electrodes Operated in Anodic and Cathodic Polarisations , 2015 .
[39] Zijing Lin,et al. Theoretical model for surface diffusion driven Ni-particle agglomeration in anode of solid oxide fuel cell , 2014 .
[40] J. Stevenson,et al. Long-term evaluation of solid oxide fuel cell candidate materials in a 3-cell generic short stack fixture, part I: Test fixture, sealing, and electrochemical performance , 2014 .
[41] A. Brisse,et al. A Review and Comprehensive Analysis of Degradation Mechanisms of Solid Oxide Electrolysis Cells , 2013 .
[42] Linda Barelli,et al. Diagnosis methodology and technique for solid oxide fuel cells: A review , 2013 .
[43] K. Yamaji,et al. Correlation between degradation of cathode performance and chromium concentration in (La,Sr)MnO3 cathode , 2012 .
[44] Aïcha Hessler-Wyser,et al. A Review of RedOx Cycling of Solid Oxide Fuel Cells Anode , 2012, Membranes.
[45] D. Favrat,et al. Electrochemical Model of Solid Oxide Fuel Cell for Simulation at the Stack Scale II: Implementation of Degradation Processes , 2011 .
[46] Yuya Tachikawa,et al. Exchange Current Density of Solid Oxide Fuel Cell Electrodes , 2011 .
[47] Boris Iwanschitz,et al. Microstructure degradation of cermet anodes for solid oxide fuel cells: Quantification of nickel grain growth in dry and in humid atmospheres , 2011 .
[48] Wei Kong,et al. Combined micro-scale and macro-scale modeling of the composite electrode of a solid oxide fuel cell , 2010 .
[49] Ellen Ivers-Tiffée,et al. SOFC Modeling and Parameter Identification by Means of Impedance Spectroscopy , 2010 .
[50] San Ping Jiang,et al. Chromium deposition and poisoning in dry and humidified air at (La0.8Sr0.2)0.9MnO3+δ cathodes of solid oxide fuel cells , 2010 .
[51] J. Van herle,et al. Nickel–Zirconia Anode Degradation and Triple Phase Boundary Quantification from Microstructural Analysis , 2009 .
[52] J. Bentzen,et al. Chromium Poisoning of LSM/YSZ and LSCF/CGO Composite Cathodes , 2009 .
[53] Robert J. Kee,et al. Percolation theory to predict effective properties of solid oxide fuel-cell composite electrodes , 2009 .
[54] K. Yoon,et al. Analysis of Electrochemical Performance of SOFCs Using Polarization Modeling and Impedance Measurements , 2009 .
[55] L. Singheiser,et al. Chromium Poisoning of the Porous Composite Cathode Effect of Cathode Thickness and Current Density , 2007 .
[56] Nishant M. Tikekar,et al. Reduction and Reoxidation Kinetics of Nickel-Based SOFC Anodes , 2006 .
[57] Y. Matsuzaki,et al. Dependence of SOFC Cathode Degradation by Chromium-Containing Alloy on Compositions of Electrodes and Electrolytes , 2001 .
[58] H. Okamoto,et al. Study of oxygen adsorption on platinum through observation of exchange current in a solid electrolyte concentration cell , 1983 .
[59] A. Hagen,et al. Degradation of Ni-YSZ and Ni-GDC fuel cells after 1000 h operation: Analysis of different overpotential contributions according to electrochemical and microstructural characterization , 2022, E3S Web of Conferences.
[60] N. Aluru,et al. A multiscale framework to predict electrochemical characteristics of yttrium doped Barium Zirconate based solid oxide cells , 2021 .
[61] Barbara Bosio,et al. Operating Principles, Performance and Technology Readiness Level of Reversible Solid Oxide Cells , 2021, Sustainability.