Influence of 3D printing on transport: a theory and experts judgment based conceptual model

ABSTRACT Consumer 3D printing is on the rise and has the potential to significantly change the transport and logistics sector. Current literature on 3D printing and transport studies does not provide a systematic model of the impact of 3D printing on transport and related (policy relevant) areas, such as traffic safety, location decisions, accessibility and environmental effects. Based on a literature review and two rounds of expert consultation, we propose and refine a conceptual model as a way to approach this gap in the literature. The expert consultation yields that the conceptual model comprises the relevant and important elements for assessing the impact of 3D printing on transport and transport-related challenges. Location, needs and transport resistance are important: (a) city-level hubs are the most likely locations for 3D printers because they can coordinate material flows and gather expertise; (b) mass-individualisation and personification dictates the needs for 3D printers; (c) distribution networks will be organised more efficiently, less empty vehicles, but raw materials still need shipping. However, experts’ opinions diverged on the impact of 3D printing on transport volumes and environmental impacts.

[1]  Tomas Diez.  Personal Fabrication: Fab Labs as Platforms for Citizen-Based Innovation, from Microcontrollers to Cities , 2012 .

[2]  Wolfgang Kersten,et al.  Innovations and strategies for logistics and supply chains , 2015 .

[3]  William E. Frazier,et al.  Metal Additive Manufacturing: A Review , 2014, Journal of Materials Engineering and Performance.

[4]  Jeroen P.J. de Jong,et al.  Innovation lessons from 3-D printing , 2014, IEEE Engineering Management Review.

[5]  F. Chan,et al.  Comparative study of adaptability and flexibility in distributed manufacturing supply chains , 2010, Decis. Support Syst..

[6]  Sujit Das,et al.  Energy and emissions saving potential of additive manufacturing: the case of lightweight aircraft components , 2016 .

[7]  Anthony Atala,et al.  3D bioprinting of tissues and organs , 2014, Nature Biotechnology.

[8]  M. Despeisse,et al.  Unlocking value for a circular economy through 3D printing: A research agenda , 2017 .

[9]  Joshua M. Pearce,et al.  Life Cycle Analysis of Distributed Recycling of Post-consumer High Density Polyethylene for 3-D Printing Filament , 2014 .

[10]  Gerald T. Grant,et al.  Direct Digital Manufacturing , 2015 .

[11]  Ronald V. Kalafsky,et al.  Geographies of production in 3D: Theoretical and research implications stemming from additive manufacturing , 2015 .

[12]  G. de Jong,et al.  Modelling freight transport , 2014 .

[13]  N. D. Burns,et al.  Rapid manufacturing: impact on supply chain methodologies and practice , 2007 .

[14]  M. Ye,et al.  The Impact of 3D Printing on the World Container Transport , 2015 .

[15]  Erwin Rauch,et al.  Sustainable production in emerging markets through Distributed Manufacturing Systems (DMS) , 2016 .

[16]  Rosanna Fornasiero,et al.  Research Issues on Customer-Oriented and Eco-friendly Networks for Healthy Fashionable Goods , 2010, BASYS.

[17]  K. Pawar,et al.  3D printing services: classification, supply chain implications and research agenda , 2016 .

[18]  B. Garrett.  3D Printing: New Economic Paradigms and Strategic Shifts , 2014 .

[19]  Adrian Bowyer,et al.  The intellectual property implications of low-cost 3D printing , 2010 .

[20]  Sampsa Hyysalo,et al.  Anticipated environmental sustainability of personal fabrication , 2015 .

[21]  Thierry Rayna,et al.  From rapid prototyping to home fabrication: How 3D printing is changing business model innovation , 2016 .

[22]  Hans-Dietrich Haasis,et al.  Quantifying the effects of additive manufacturing on supply networks by means of a facility location-allocation model , 2016, Logist. Res..

[23]  Matthew A. Waller,et al.  Can We Stay Ahead of the Obsolescence Curve? On Inflection Points, Proactive Preemption, and the Future of Supply Chain Management , 2014 .

[24]  Lori Tavasszy,et al.  Emerging Global Logistics Networks: Implications for Transport Systems and Policies , 2002 .

[25]  J. Holmström,et al.  Future of supply chain planning: closing the gaps between practice and promise , 2016 .

[26]  Jan Holmström,et al.  The direct digital manufacturing (r)evolution: definition of a research agenda , 2016 .

[27]  P. Mokhtarian,et al.  TTB or not TTB, that is the question: a review and analysis of the empirical literature on travel time (and money) budgets , 2004 .

[28]  Alan Griffiths,et al.  rapid manufacturing: the next industrial revolution , 2002 .

[29]  Darli Rodrigues Vieira,et al.  How Additive Manufacturing Improves Product Lifecycle Management and Supply Chain Management in the Aviation Sector? , 2015, PLM.

[30]  Dimitris Mourtzis,et al.  Decentralized manufacturing systems review: challenges and outlook , 2012, Logist. Res..

[31]  AlanC. Mckinnon,et al.  The Possible Impact of 3D Printing and Drones on Last-Mile Logistics: An Exploratory Study , 2016 .

[32]  Simon Ford,et al.  Additive manufacturing and sustainability: an exploratory study of the advantages and challenges , 2016 .

[33]  Joshua M. Pearce,et al.  Global value chains from a 3D printing perspective , 2016 .

[34]  van de Adm Toon Ven,et al.  De logistieke wereld bezien door de bril van de overheid , 1995 .

[35]  David C. Williams,et al.  United States Postal Service Office of Inspector General , 2005 .

[36]  Yang Cheng,et al.  Additive manufacturing technology in spare parts supply chain: a comparative study , 2017, Int. J. Prod. Res..

[37]  Andrew Taylor,et al.  Additive Manufacturing: Current Status and Future Prospects , 2014, PRO-VE.

[38]  Liang Hou,et al.  Additive manufacturing and its societal impact: a literature review , 2013 .

[39]  Jorge Vicente Lopes da Silva.  3D technologies and the new digital ecosystem: a Brazilian experience , 2013, MEDES.

[40]  Manfred Walter,et al.  Rapid manufacturing in the spare parts supply chain: Alternative approaches to capacity deployment , 2010 .

[41]  Suphunnika Ibbotson,et al.  Direct digital manufacturing: definition, evolution, and sustainability implications , 2015 .

[42]  F. Fischler,et al.  The third Industrial Revolution , 2012 .

[43]  A. Bryman.  Social Research Methods , 2001 .

[44]  M. Bogers,et al.  Additive manufacturing for consumer-centric business models: Implications for supply chains in consumer goods manufacturing , 2016 .

[45]  N. Mustafee,et al.  Investigating the feasibility of supply chain-centric business models in 3D chocolate printing: A simulation study , 2016 .

[46]  G. R. Janssen,et al.  TNO : The impact of 3-D printing on supply chain management , 2014 .

[47]  M. Christopher,et al.  The Supply Chain Becomes the Demand Chain , 2014 .