Development of photocatalytic asphalt mixtures by the deposition and volumetric incorporation of TiO2 nanoparticles

Abstract The field of construction and building industry was identified as an important market for the use of photocatalytic products since they can be applied to reduce building facades maintenance costs and also the pollution effects, particularly important in metropolis with high population density. The multifunctional capability of these materials will be promoted by the photocatalytic oxidation of pollutant agents. In this research work it was studied and developed a process to produce road pavements formulations with tailored properties that will and promote photocatalytic and self-cleaning effects. This can empower the production of non-slipping surfaces important to avoid accidents that occurs due to the combination of the first autumn rains and adsorbed oils and other organic compounds onto the pavement’s surfaces. To integrate the semiconductor material, two application methods were used: a water-based TiO2 nanoparticles solution, applied by spraying, and using TiO2 nanoparticles by volume incorporation to the base asphalt mixture.

[1]  R. D. Shannon.  Revised effective ionic radii and systematic studies of interatomic distances in halides and chalcogenides , 1976 .

[2]  Ron Jenkins,et al.  Introduction to X-ray powder diffractometry , 1996 .

[3]  Virginie Mouillet,et al.  Comparison by Fourier transform infrared (FTIR) spectroscopy of different ageing techniques: application to road bitumens , 2001 .

[4]  V. Ferraz,et al.  Photodegradation of hot-mix asphalt , 2008 .

[5]  Jing Xu,et al.  Analysis of aging mechanism of SBS polymer modified asphalt based on Fourier transform infrared spectrum , 2010 .

[6]  R. N. Hunter,et al.  The Shell bitumen handbook , 2015 .

[7]  Erik M. Kelder,et al.  Electrostatic sol-spray deposition (ESSD) and characterisation of nanostructured TiO2 thin films , 1999 .

[8]  R. J. Hunter,et al.  Zeta Potential in Colloid Science , 1981 .

[9]  G Götz Hüsken,et al.  Experimental study of photocatalytic concrete products for air purification , 2009 .

[10]  R. N. Traxler,et al.  The Colloidal Nature of Asphalt as Shown by its Flow Properties , 1935 .

[11]  L. Loeber,et al.  New direct observations of asphalts and asphalt binders by scanning electron microscopy and atomic force microscopy , 1996 .

[12]  A. Fujishima,et al.  TiO2 Photocatalysis: A Historical Overview and Future Prospects , 2005 .

[13]  J. Herrmann,et al.  PHOTOCATALYTIC DEGRADATION OF VARIOUS TYPES OF DYES (ALIZARIN S, CROCEIN ORANGE G, METHYL RED, CONGO RED, METHYLENE BLUE) IN WATER BY UV-IRRADIATED TITANIA , 2002 .

[14]  Francois Olive,et al.  TiO2-containing cement pastes and mortars: Measurements of the photocatalytic efficiency using a rhodamine B-based colourimetric test , 2009 .

[15]  V. Elings,et al.  Fractured polymer/silica fiber surface studied by tapping mode atomic force microscopy , 1993 .

[16]  M. Madou.  Fundamentals of microfabrication : the science of miniaturization , 2002 .

[17]  R. B. Girdler.  CONSTITUTION OF ASPHALTENES AND RELATED STUDIES , 1965 .

[18]  Shaopeng Wu,et al.  Influence of aging on the evolution of structure, morphology and rheology of base and SBS modified bitumen , 2009 .

[19]  Alberto Strini,et al.  Measurement of benzene, toluene, ethylbenzene and o-xylene gas phase photodegradation by titanium dioxide dispersed in cementitious materials using a mixed flow reactor , 2005 .

[20]  R. Snyders,et al.  XPS study of TiOx thin films prepared by d.c. magnetron sputtering in Ar–O2 gas mixtures , 2000 .

[21]  R. Traxler.  The Physical Chemistry of Asphaltic Bitumen. , 1936 .