Experimental assessment of low-temperature martensite transformations in Ni-rich polycrystalline Ni-Ti alloys

[1]  S. Ramakrishna,et al.  A state-of-the-art review of the fabrication and characteristics of titanium and its alloys for biomedical applications , 2021, Bio-Design and Manufacturing.

[2]  Yang Ren,et al.  Exploiting ultra-large linear elasticity over a wide temperature range in nanocrystalline NiTi alloy , 2020 .

[3]  V. Buono,et al.  Precipitation kinetics of Ti3Ni4 and multistage martensitic transformation in an aged Ni–rich Ni–Ti shape memory alloy , 2020 .

[4]  John W. Nicholson Titanium Alloys for Dental Implants: A Review , 2020, Prosthesis.

[5]  R. Boyer,et al.  Opportunities and Issues in the Application of Titanium Alloys for Aerospace Components , 2020, Metals.

[6]  G. Muller-Kamskii,et al.  Structure, Phase Composition, and Mechanical Properties of Biocompatible Titanium Alloys of Different Types , 2020, Physics of Metals and Metallography.

[7]  J. Khalil-Allafi,et al.  Microstructural characterization and quantitative phase analysis of Ni-rich NiTi after stress assisted aging for long times using the Rietveld method , 2020, Materials Chemistry and Physics.

[8]  S. Semiatin An Overview of the Thermomechanical Processing of α/β Titanium Alloys: Current Status and Future Research Opportunities , 2020, Metallurgical and Materials Transactions A.

[9]  M. Kaur,et al.  Review on titanium and titanium based alloys as biomaterials for orthopaedic applications. , 2019, Materials science & engineering. C, Materials for biological applications.

[10]  A. Sandu,et al.  Biocompatible Titanium Alloys used in Medical Applications , 2019, Revista de Chimie.

[11]  Yuan Wu,et al.  Development of advanced materials via entropy engineering , 2019, Scripta Materialia.

[12]  A. Stebner,et al.  The Effect of Low Temperature Aging and the Evolution of R-Phase in Ni-Rich NiTi , 2018, Shape Memory and Superelasticity.

[13]  V. Senthilkumar,et al.  Review on phase transformation behavior of NiTi shape memory alloys , 2018 .

[14]  R. Valiev,et al.  Grain Nucleation and Growth in Deformed NiTi Shape Memory Alloys: An In Situ TEM Study , 2017, Shape Memory and Superelasticity.

[15]  L. Cui,et al.  Grain size effect on stress hysteresis of nanocrystalline NiTi alloys , 2016 .

[16]  A. Rajadurai,et al.  Microstructure of cryogenically treated martensitic shape memory nickel-titanium alloy , 2015, Journal of conservative dentistry : JCD.

[17]  K. Bhattacharya,et al.  The Influence of the R-Phase on the Superelastic Behavior of NiTi , 2015, Shape Memory and Superelasticity.

[18]  B. Verlinden,et al.  R-phase transformation in NiTi alloys , 2014 .

[19]  T. P. Singh,et al.  Effect of Deep Cryogenic Treatment on Machinability of NiTi Shape Memory Alloys in Electro Discharge Machining , 2014 .

[20]  C. Ke,et al.  Fine-Grained Bulk NiTi Shape Memory Alloy Fabricated by Rapid Solidification Process and Its Mechanical Properties and Damping Performance , 2013 .

[21]  J. Eiras,et al.  Ultrasonic investigation of the interaction of hydrogen-dislocations in copper crystals , 2010, 1010.6110.

[22]  Gunther Eggeler,et al.  On the multiplication of dislocations during martensitic transformations in NiTi shape memory alloys , 2010 .

[23]  G. Eggeler,et al.  In-situ TEM cooling/heating experiments on deformed NiTi shape memory single crystals , 2009 .

[24]  W. Clark,et al.  X-ray diffraction study of low-temperature phase transformations in nickel-titanium orthodontic wires. , 2008, Dental materials : official publication of the Academy of Dental Materials.

[25]  A. Moreno-Gobbi,et al.  Ultrasonic study of structural instabilities in nickel induced by magnetic fields , 2008 .

[26]  J. Eiras,et al.  Ultrasonic evidence of the existence of two hydrogen Snoek–Köster relaxations in high-purity single crystal copper , 2007 .

[27]  Thilla Sekar Vinothkumar,et al.  Influence of deep dry cryogenic treatment on cutting efficiency and wear resistance of nickel-titanium rotary endodontic instruments. , 2007, Journal of endodontics.

[28]  B. Coluzzi,et al.  A new low-temperature internal friction peak in NiTi based alloys , 2006 .

[29]  X. Ren,et al.  Physical metallurgy of Ti–Ni-based shape memory alloys , 2005 .

[30]  J. W. Kim,et al.  Effect of cryogenic treatment on nickel-titanium endodontic instruments. , 2005, International endodontic journal.

[31]  D. Stróż,et al.  Two-stage R phase transformation in a cold-rolled and annealed Ti–50.6 at.%Ni alloy , 2005 .

[32]  B. Coluzzi,et al.  Hydrogen diffusion and interpretation of the 200K anelastic relaxation in NiTi alloys , 2004 .

[33]  J. Pelzl,et al.  Ultrasonic investigation of multistage martensitic transformations in aged Ni-rich Ni–Ti shape memory alloys , 2004 .

[34]  B. Coluzzi,et al.  Mechanical spectroscopy of the H-free and H-doped Ni30Ti50Cu20 shape memory alloy , 2003 .

[35]  B. Coluzzi,et al.  Extraordinary high damping of hydrogen-doped NiTi and NiTiCu shape memory alloys , 2003 .

[36]  F. Rivadulla,et al.  Ultrasonic evidence of an uncorrelated cluster formation temperature in manganites with first-order magnetic transition at the Curie temperature , 2003, cond-mat/0304187.

[37]  B. Coluzzi,et al.  Internal friction spectra of the Ni40Ti50Cu10 shape memory alloy charged with hydrogen , 2003 .

[38]  H. Sitepu Use of Synchrotron Diffraction Data for Describing Crystal Structure and Crystallographic Phase Analysis of R-Phase NiTi Shape Memory Alloy , 2003 .

[39]  P. Lukas,et al.  In situ neutron diffraction studies of the R-phase transformation in the NiTi shape memory alloy , 2002 .

[40]  X. Ren,et al.  30 MHz ultrasonic attenuation of TiNi single crystal associated with B2-B19' martensitic transformation and twin boundaries , 2001 .

[41]  X. Ren,et al.  Ultrasonic attenuation study of TiNi and TiNiCu single crystals , 2001 .

[42]  Y. Chumlyakov,et al.  A comparative study of elastic constants of Ti-Ni-based alloys prior to martensitic transformation , 2001 .

[43]  Brian H. Toby,et al.  EXPGUI, a graphical user interface for GSAS , 2001 .

[44]  A. Pelton,et al.  Optimisation of processing and properties of medical grade Nitinol wire , 2000 .

[45]  Xiaobing Ren,et al.  Martensitic transformations in nonferrous shape memory alloys , 1999 .

[46]  B. Coluzzi,et al.  Martensitic transitions and mechanical spectroscopy of Ni50.8Ti49.2 alloy containing hydrogen , 1999 .

[47]  Rolf Gotthardt,et al.  Interaction between microstructure and multiple-step transformation in binary NiTi alloys using in-situ transmission electron microscopy observations , 1998 .

[48]  J. Trivisonno,et al.  Ultrasonic study of the two-step martensitic phase transformation in Ni 2 MnGa , 1998 .

[49]  Shuichi Miyazaki,et al.  Development of Shape Memory Alloys , 1989 .

[50]  H. Matsumoto,et al.  Ultrasonic attenuation in NiTi near the martensitic transformation temperature , 1988 .

[51]  Shuichi Miyazaki,et al.  Deformation and transition behavior associated with theR-phase in Ti-Ni alloys , 1986 .

[52]  A. Kulik,et al.  Neutron-Diffraction Measurements in Equiatomic Niti - Alloys , 1982 .

[53]  W. Rehwald The study of structural phase transitions by means of ultrasonic experiments , 1973 .