论文信息 - Temperature Correction of PSP Measurement for Low-Speed Flow Using Infrared Camera

Temperature Correction of PSP Measurement for Low-Speed Flow Using Infrared Camera

Pressure-Sensitive Paint (PSP) system combined with an infrared (IR) camera has been developed at 2 m x 2 m low-speed wind tunnel at WINTEC/JAXA. The temperature correction of PSP was conducted using both temperature image acquired by the IR camera and wind-off images immediately after the wind tunnel shutdown. As a verification test, the pressure distribution on a supersonic transfer (SST) model was measured by the PSP/IR combined system. The measurement accuracy was fairly improved compared to the previous method, i.e., the temperature correction of PSP using only wind-off PSP images immediately after wind tunnel shutdown.

[1] Y. Le Sant,et al. Low Speed Tests using PSP at ONERA , 2001 .

[2] Bryan Campbell,et al. Temperature- and Pressure-Sensitive Luminescent Paints in Aerodynamics , 1997 .

[3] K. Nakakita,et al. Application of Pressure-Sensitive Paint to Low-Speed Wind Tunnel Testing at Japan Aerospace Exploration Agency , 2004 .

[4] James Bell,et al. Applications of Pressure-Sensitive Paint to Testing at Very Low Flow Speeds , 2004 .

[5] J. Bell,et al. Surface Pressure Measurements Using Luminescent Coatings , 2003 .

[6] K. Nakakita,et al. DEVELOPMENT OF THE PRESSURE-SENSITIVE PAINT MEASUREMENT FOR LARGE WIND TUNNELS AT JAPAN AEROSPACE EXPLORATION AGENCY , 2004 .