The mechanical properties of shale based on micro-indentation test

Abstract In view of the difficulty to get mechanical characteristics of shale reservoirs, a quantitative evaluation method based on micro-indentation test technology was proposed to research the meso-mechanical properties of shale. Through micro-indentation test of shale outcrop samples from the Cambrian Longmaxi Formation in the Changning area, Sichuan Basin, the meso-mechanical properties of shale were analyzed, and the relationship between the macro-scale and meso-scale shale mechanical properties was evaluated. The analysis results of micro-indentation tests show that the mesoscopic elastic modulus and indentation hardness are heterogeneous in distribution. The comparison of macro and meso experiments shows that the statistical mean value of meso-elastic modulus is approximate to the value of the macro-elastic modulus. The relationship between composition and mechanical properties of shale was obtained based on the packing density model theory. The result shows that mesoscopic elastic modulus and indentation hardness increase nonlinearly with the increase of the packing density. Based on the hardness-packing density model, the reverse analysis of cohesion and friction angles shows that the mesoscopic value is slightly smaller than the macroscopic value. The micro-indentation test technology can evaluate shale meso-mechanical properties and predict the macro-mechanical properties effectively.

[1]  Franz-Josef Ulm,et al.  The nanogranular origin of friction and cohesion in shale—A strength homogenization approach to interpretation of nanoindentation results , 2011 .

[2]  Y. Sun,et al.  Indenter tip radius and load frame compliance calibration using nanoindentation loading curves , 1999 .

[3]  Franz-Josef Ulm,et al.  Hardness-packing density scaling relations for cohesive-frictional porous materials , 2008 .

[4]  Franz-Josef Ulm,et al.  The effect of the nanogranular nature of shale on their poroelastic behavior , 2007 .

[5]  Ping Chen,et al.  Study of meso-damage characteristics of shale hydration based on CT scanning technology , 2014 .

[6]  J. A. Ortega,et al.  Homogenization of Cohesive-Frictional Strength Properties of Porous Composites: Linear Comparison Composite Approach , 2011 .

[7]  Dongxu Liu,et al.  An New Area Function for Sharp Indenter Tips in Nanoindentation , 2004 .

[8]  Dong Du,et al.  Scientific issues on effective development of marine shale gas in southern China , 2013 .

[9]  Gilles Chanvillard,et al.  Modelling Elasticity of a Hydrating Cement Paste , 2007 .

[10]  George M. Pharr,et al.  On the generality of the relationship among contact stiffness, contact area, and elastic modulus during indentation , 1992 .

[11]  G. Pharr,et al.  Measurement of hardness and elastic modulus by instrumented indentation: Advances in understanding and refinements to methodology , 2004 .

[12]  J. Sherwood,et al.  LETTER TO THE EDITOR: Packing of spheroids in three-dimensional space by random sequential addition , 1997 .

[13]  Yang-Tse Cheng,et al.  Scaling, dimensional analysis, and indentation measurements , 2004 .

[14]  Alain Molinari,et al.  Micromechanical approach to the behavior of poroelastic materials , 2002 .

[15]  Cnpc Drilling Status quo and challenges of global shale gas drilling and completion , 2011 .

[16]  Alfredo Edmundo Huespe,et al.  A nonlinear optimization procedure for limit analysis , 1996 .

[17]  Jia-wen He,et al.  New method for determining Young's modulus by non-ideally sharp indentation , 2005 .

[18]  G. Pharr,et al.  An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments , 1992 .

[19]  N. R. Chitkara,et al.  Numerical construction of axisymmetric slip-line fields for indentation of thick blocks by rigid conical indenters and friction at the tool-metal interface , 1992 .

[20]  Franz-Josef Ulm,et al.  Grid indentation analysis of composite microstructure and mechanics: Principles and validation , 2006 .

[21]  Franz-Josef Ulm,et al.  Dual-indentation technique for the assessment of strength properties of cohesive-frictional materials , 2006 .

[22]  Huang Jinliang Reservoir characteristics of shale gas in Longmaxi Formation of the Lower Silurian,southern Sichuan , 2012 .

[23]  Yang-Tse Cheng,et al.  Relationships between hardness, elastic modulus, and the work of indentation , 1998 .

[24]  F. J. Lockett Indentation of a rigid/plastic material by a conical indenter , 1963 .

[25]  Luc Dormieux,et al.  Micromechanics of saturated and unsaturated porous media , 2002 .

[26]  Helmut Schweiger,et al.  On the use of drucker-prager failure criteria for earth pressure problems , 1994 .