Electrospun nanofibers of polymer composite as a promising humidity sensitive material

Abstract Nanofibers of a composite of a silicon-containing polyelectrolyte, polyethylene oxide and polyaniline (PANI) were obtained by electrospinning and heat treatment. The morphologies of the composite nanofibers were characterized by scanning electron microscopy, which showed that the nanofibers with a diameter of 250–500 nm formed a non-woven mat with highly porous structure. It was found that the polymer composite nanofibers showed impedance change from 6.3 × 10 6 to 2.5 × 10 4  Ω with the increment of relative humidity (RH) from 22 to 97% at room temperature, exhibiting high sensitivity and good linearity on a semi-logarithmic scale. In addition, they exhibited fast and highly reversible response characterized by very small hysteresis of ∼2% RH and short response time (t 90% : 7 s and 19 s for adsorption and desorption between 33 and 97%RH, respectively). The modification of the electrode with poly(diallyldimethylammonium chloride) prior to the deposition of nanofibers improved their humidity response, which may be related to the enhanced contact between the nanofibers and underlying substrate. The effect of PANI on the humidity response of the composite nanofibers was also investigated, and it was found that PANI effectively decreased the impedance of the nanofibers. The electrospun polymer composite nanofibers may find applications in the preparation of high performance humidity sensors.

[1]  I. Ramos,et al.  Detection of Moisture and Methanol Gas Using a Single Electrospun Tin Oxide Nanofiber , 2007, IEEE Sensors Journal.

[2]  S. Ramakrishna,et al.  A review on electrospinning design and nanofibre assemblies , 2006, Nanotechnology.

[3]  Sudha V. Bhoraskar,et al.  Humidity sensing with weak acid-doped polyaniline and its composites , 2003 .

[4]  Hong Dong,et al.  Synthesis and Assembly of Metal Nanoparticles on Electrospun Poly(4-vinylpyridine) Fibers and Poly(4-vinylpyridine) Composite Fibers , 2006 .

[5]  R. Aiyer,et al.  Synthesis, characterization, and morphology of p-toluene sulfonic acid-doped polyaniline : A material for humidity sensing application , 2005 .

[6]  Yong Li,et al.  Study on humidity sensing property based on TiO2 porous film and polystyrene sulfonic sodium , 2009 .

[7]  J. Vacanti,et al.  A biodegradable nanofiber scaffold by electrospinning and its potential for bone tissue engineering. , 2003, Biomaterials.

[8]  Jun Kameoka,et al.  Polymeric Nanowire Chemical Sensor , 2004 .

[9]  Yang Li,et al.  Gas sensing properties of a composite composed of electrospun poly(methyl methacrylate) nanofibers and in situ polymerized polyaniline , 2008 .

[10]  Mu-jie Yang,et al.  A fast response resistance-type humidity sensor based on organic silicon containing cross-linked copolymer , 2006 .

[11]  A. Gopalan,et al.  Electrospun poly(vinylidene fluoride)/poly(aminophenylboronic acid) composite nanofibrous membrane as a novel glucose sensor. , 2007, Analytical biochemistry.

[12]  Yang Li,et al.  A highly water-resistive humidity sensor based on silicon-containing polyelectrolytes prepared by one-pot method , 2007 .

[13]  Liming Dai,et al.  Electrospun polymer nanofiber sensors , 2005 .

[14]  J. Deitzel,et al.  The effect of processing variables on the morphology of electrospun nanofibers and textiles , 2001 .

[15]  Yang Li,et al.  Humidity sensitive properties of an anionic conjugated polyelectrolyte , 2008 .

[16]  Dewyani Patil,et al.  Humidity sensitive poly(2,5-dimethoxyaniline)/WO3 composites , 2008 .

[17]  Ji-Huan He,et al.  Mathematical models for continuous electrospun nanofibers and electrospun nanoporous microspheres , 2007 .

[18]  N. V. Hulst,et al.  Beaded Electrospun Fibers for Photonic Applications , 2005 .

[19]  Jaewon Yoon,et al.  Colorimetric sensors for volatile organic compounds (VOCs) based on conjugated polymer-embedded electrospun fibers. , 2007, Journal of the American Chemical Society.

[20]  Horst A von Recum,et al.  Electrospinning: applications in drug delivery and tissue engineering. , 2008, Biomaterials.

[21]  H. Hahn,et al.  Electrospun nanocomposite fiber mats as gas sensors , 2006 .

[22]  Younan Xia,et al.  Electrospinning of Nanofibers: Reinventing the Wheel? , 2004 .

[23]  P. Su,et al.  Flexible humidity sensor based on TiO2 nanoparticles-polypyrrole-poly-[3-(methacrylamino)propyl] trimethyl ammonium chloride composite materials , 2008 .

[24]  Geoffrey M. Spinks,et al.  Micro-humidity sensors based on a processable polyaniline blend , 2005 .

[25]  Tong Zhang,et al.  Improved and excellent humidity sensitivities based on KCl-doped TiO2 electrospun nanofibers , 2008 .

[26]  Mujie Yang,et al.  Investigations on the ion transport mechanism in conducting polymer films , 2000 .

[27]  Ping Wang,et al.  Enzyme‐Carrying Polymeric Nanofibers Prepared via Electrospinning for Use as Unique Biocatalysts , 2002, Biotechnology progress.

[28]  Craig A. Grimes,et al.  Gas sensing characteristics of multi-wall carbon nanotubes , 2001 .

[29]  Bin Ding,et al.  Electrospun nanofibrous membranes coated quartz crystal microbalance as gas sensor for NH3 detection , 2004 .

[30]  Wei Zheng,et al.  Highly sensitive and stable humidity nanosensors based on LiCl doped TiO2 electrospun nanofibers. , 2008, Journal of the American Chemical Society.

[31]  W. Heineman,et al.  Humidity sensor based on conductivity measurements of a poly(dimethyldiallylammonium chloride) polymer film , 1993 .

[32]  Yang Li,et al.  Crosslinked and quaternized poly(4-vinylpyridine)/polypyrrole composite as a potential candidate for the detection of low humidity. , 2008, Talanta.

[33]  P. Ajayan,et al.  Preparation of biopolymer fibers by electrospinning from room temperature ionic liquids. , 2006, Biomacromolecules.