Investigation of a simple approach to predict rainscreen wall ventilation rates for hygrothermal simulation purposes

[1]  Johnny Kronvall.  Air flows in building components , 1980 .

[2]  Jesper Arfvidsson,et al.  Comparison of field measurements and calculations of relative humidity and temperature in wood framed walls , 2010 .

[3]  Jörgen Falk,et al.  Ventilated rainscreen cladding: A study of the ventilation drying process , 2013 .

[4]  Morten Hjorslev Hansen,et al.  On the influence of cavity ventilation on moisture content in timber frame walls , 2002 .

[5]  Lars-Erik Harderup,et al.  Importance of a Proper applied Airflow in the Façade Air Gap when Moisture and Temperature are Calculated in Wood Framed Walls , 2010 .

[6]  Charles G. Carll,et al.  Effect of Cladding Systems on Moisture Performance of Wood-Framed Walls in a Mixed-Humid Climate , 2010 .

[7]  K. Sandin.  Energieffektivisering av miljonprogrammets flerbostadshus genom beständiga tilläggsisoleringssystem: uttorkning av blöt lättbetongvägg efter utvändig tilläggsisolering med olika system , 2013 .

[8]  Anton TenWolde,et al.  Airflows and Moisture Conditions in Walls of Manufactured Homes , 1995 .

[9]  Jelena Srebric,et al.  Modeling convective drying of ventilated wall chambers in building enclosures , 2006 .

[10]  Jelena Srebric,et al.  Analytical procedures for estimating airflow rates in ventilated, screened wall systems (VSWS) , 2012 .

[11]  Solof Mundt Petersen.  Moisture safety in wood frame walls : blind evaluation of the hygrothermal calculation tool WUFI 5.0 using field measurements and determination of factors affecting the moisture safety , 2013 .

[12]  Oskar Larsson.  Modeling of Temperature Profiles in a Concrete Slab under Climatic Exposure , 2009 .

[13]  Carl-Eric Hagentoft.  Introduction to Building Physics , 2001 .

[14]  John Straube,et al.  Ventilated Wall Claddings: Review, Field Performance, and Hygrothermal Modeling , 2009 .

[15]  Jörgen Falk,et al.  Ventilated rainscreen cladding: Measurements of cavity air velocities, estimation of air change rates and evaluation of driving forces , 2013 .

[16]  Sven Thelandersson,et al.  Mould resistance design (MRD) model for evaluation of risk for microbial growth under varying climate conditions , 2013 .