Surface modification of biomaterials and biomedical devices using additive manufacturing.

The demand for synthetic biomaterials in medical devices, pharmaceutical products and, tissue replacement applications are growing steadily due to aging population worldwide. The use for patient matched devices is also increasing due to availability and integration of new technologies. Applications of additive manufacturing (AM) or 3D printing (3DP) in biomaterials have also increased significantly over the past decade towards traditional as well as innovative next generation Class I, II and III devices. In this review, we have focused our attention towards the use of AM in surface modified biomaterials to enhance their in vitro and in vivo performances. Specifically, we have discussed the use of AM to deliberately modify the surfaces of different classes of biomaterials with spatial specificity in a single manufacturing process as well as commented on the future outlook towards surface modification using AM. STATEMENT OF SIGNIFICANCE It is widely understood that the success of implanted medical devices depends largely on favorable material-tissue interactions. Additive manufacturing has gained traction as a viable and unique approach to engineered biomaterials, for both bulk and surface properties that improve implant outcomes. This review explores how additive manufacturing techniques have been and can be used to augment the surfaces of biomedical devices for direct clinical applications.

[1]  J. Plevier,et al.  Early migration of tibial components is associated with late revision , 2012, Acta orthopaedica.

[2]  Xing Zhang,et al.  Improving osteointegration and osteogenesis of three-dimensional porous Ti6Al4V scaffolds by polydopamine-assisted biomimetic hydroxyapatite coating. , 2015, ACS applied materials & interfaces.

[3]  Mikkel Jørgensen,et al.  Silver front electrode grids for ITO-free all printed polymer solar cells with embedded and raised topographies, prepared by thermal imprint, flexographic and inkjet roll-to-roll processes. , 2012, Nanoscale.

[4]  Alok Sutradhar,et al.  Experimental validation of 3D printed patient-specific implants using digital image correlation and finite element analysis , 2014, Comput. Biol. Medicine.

[5]  Aleksandar Matic,et al.  Long-term osseointegration of 3D printed CoCr constructs with an interconnected open-pore architecture prepared by electron beam melting. , 2016, Acta biomaterialia.

[6]  Peter X. Ma,et al.  Scaffolds for tissue fabrication , 2004 .

[7]  P. Serruys,et al.  Progenitor Cell Capture by tents Coated With Antibody Against CD 34 he HEALING-FIM ( Healthy Endothelial Accelerated ining Inhibits Neointimal Growth-First In Man ) Registry , 2005 .

[8]  Suman Das,et al.  3D printing of biomaterials , 2015 .

[9]  K. Leong,et al.  Scaffold development using selective laser sintering of polyetheretherketone-hydroxyapatite biocomposite blends. , 2003, Biomaterials.

[10]  P. Aspenberg,et al.  Migration, particles, and fluid pressure. A discussion of causes of prosthetic loosening , 1998 .

[11]  Vamsi Krishna Balla,et al.  Microwave‐sintered 3D printed tricalcium phosphate scaffolds for bone tissue engineering , 2013, Journal of tissue engineering and regenerative medicine.

[12]  P. Moghe,et al.  Skeletal stem cell physiology on functionally distinct titania nanotopographies. , 2011, Biomaterials.

[13]  B. Saramago,et al.  Human serum albumin adsorption on TiO2 from single protein solutions and from plasma. , 2004, Langmuir : the ACS journal of surfaces and colloids.

[14]  S. Yoo,et al.  Creating perfused functional vascular channels using 3D bio-printing technology. , 2014, Biomaterials.

[15]  Amit Bandyopadhyay,et al.  Processing of controlled porosity ceramic structures via fused deposition , 1999 .

[16]  Zhigang Suo,et al.  Strengthening alginate/polyacrylamide hydrogels using various multivalent cations. , 2013, ACS applied materials & interfaces.

[17]  E. White,et al.  Stretchable Electronics: Direct Writing of Gallium‐Indium Alloy for Stretchable Electronics (Adv. Funct. Mater. 23/2014) , 2014 .

[18]  J. Czernuszka,et al.  Development of specific collagen scaffolds to support the osteogenic and chondrogenic differentiation of human bone marrow stromal cells. , 2008, Biomaterials.

[19]  A. Bandyopadhyay,et al.  Phase stability and biological property evaluation of plasma sprayed hydroxyapatite coatings for orthopedic and dental applications. , 2015, Acta biomaterialia.

[20]  S. Kurtz,et al.  PEEK biomaterials in trauma, orthopedic, and spinal implants. , 2007, Biomaterials.

[21]  Clive D McFarland,et al.  Platelet adhesion to polystyrene-based surfaces preadsorbed with plasmas selectively depleted in fibrinogen, fibronectin, vitronectin, or von Willebrand's factor. , 2002, Journal of biomedical materials research.

[22]  J. Jansen,et al.  The use of micro- and nanospheres as functional components for bone tissue regeneration. , 2012, Tissue engineering. Part B, Reviews.

[23]  A Tserepi,et al.  Direct Covalent Biomolecule Immobilization on Plasma-Nanotextured Chemically Stable Substrates. , 2015, ACS applied materials & interfaces.

[24]  G. Blin,et al.  Multiple Functionalities of Polyelectrolyte Multilayer Films: New Biomedical Applications , 2010, Advanced materials.

[25]  A. Bandyopadhyay,et al.  Surface coatings for improvement of bone cell materials and antimicrobial activities of Ti implants. , 2008, Journal of biomedical materials research. Part B, Applied biomaterials.

[26]  C J Murphy,et al.  Effects of synthetic micro- and nano-structured surfaces on cell behavior. , 1999, Biomaterials.

[27]  André Luiz Jardini,et al.  Microstructure and mechanical behavior of porous Ti-6Al-4V parts obtained by selective laser melting. , 2013, Journal of the mechanical behavior of biomedical materials.

[28]  Jianzhong Fu,et al.  Freeform inkjet printing of cellular structures with bifurcations , 2015, Biotechnology and bioengineering.

[29]  Federica Chiellini,et al.  Polymeric Materials for Bone and Cartilage Repair , 2010 .

[30]  G. Whitesides,et al.  Soft Lithography. , 1998, Angewandte Chemie.

[31]  R. Gustilo,et al.  Titanium, chromium and cobalt ions modulate the release of bone-associated cytokines by human monocytes/macrophages in vitro. , 1996, Biomaterials.

[32]  Kam W Leong,et al.  Nanopattern-induced changes in morphology and motility of smooth muscle cells. , 2005, Biomaterials.

[33]  John R. Tumbleston,et al.  Continuous liquid interface production of 3D objects , 2015, Science.

[34]  L. Ambrosio,et al.  Three-dimensional poly(ε-caprolactone) bioactive scaffolds with controlled structural and surface properties. , 2012, Biomacromolecules.

[35]  A. Bandyopadhyay,et al.  Microstructure, mechanical and wear properties of laser surface melted Ti6Al4V alloy. , 2014, Journal of the mechanical behavior of biomedical materials.

[36]  Buddy D Ratner,et al.  The influence of surface energy on competitive protein adsorption on oxidized NiTi surfaces. , 2007, Biomaterials.

[37]  Ming Yan,et al.  An Overview of Densification, Microstructure and Mechanical Property of Additively Manufactured Ti-6Al-4V — Comparison among Selective Laser Melting, Electron Beam Melting, Laser Metal Deposition and Selective Laser Sintering, and with Conventional Powder , 2015 .

[38]  Tejal A Desai,et al.  Influence of engineered titania nanotubular surfaces on bone cells. , 2007, Biomaterials.

[39]  M. Alexander,et al.  Desktop 3D printing of controlled release pharmaceutical bilayer tablets. , 2014, International journal of pharmaceutics.

[40]  N. Krott,et al.  A novel drug-eluting stent coated with an integrin-binding cyclic Arg-Gly-Asp peptide inhibits neointimal hyperplasia by recruiting endothelial progenitor cells. , 2006, Journal of the American College of Cardiology.

[41]  M. Alexander,et al.  3D printing of five-in-one dose combination polypill with defined immediate and sustained release profiles. , 2015, Journal of controlled release : official journal of the Controlled Release Society.

[42]  Leena‐Sisko Johansson,et al.  Atomic and molecular layer deposition for surface modification , 2014 .

[43]  Brian Derby,et al.  Bioprinting: Inkjet printing proteins and hybrid cell-containing materials and structures , 2008 .

[44]  Amit Bandyopadhyay,et al.  Effect of Chemistry on Osteogenesis and Angiogenesis Towards Bone Tissue Engineering Using 3D Printed Scaffolds , 2016, Annals of Biomedical Engineering.

[45]  R. Singer,et al.  Cellular Ti-6Al-4V structures with interconnected macro porosity for bone implants fabricated by selective electron beam melting. , 2008, Acta biomaterialia.

[46]  A. Bandyopadhyay,et al.  MgO-doped tantalum coating on Ti: microstructural study and biocompatibility evaluation. , 2012, ACS applied materials & interfaces.

[47]  K. Ino,et al.  Application of ultra-water-repellent surface to cell culture. , 2007, Journal of bioscience and bioengineering.

[48]  Alison P McGuigan,et al.  The influence of biomaterials on endothelial cell thrombogenicity. , 2007, Biomaterials.

[49]  C. Wen,et al.  In vitro bioactivity evaluation of titanium and niobium metals with different surface morphologies. , 2008, Acta biomaterialia.

[50]  Aaron R Wheeler,et al.  An inkjet printed, roll-coated digital microfluidic device for inexpensive, miniaturized diagnostic assays. , 2016, Lab on a chip.

[51]  C. Schröder,et al.  Biological activity and migration of wear particles in the knee joint: an in vivo comparison of six different polyethylene materials , 2014, Journal of Materials Science: Materials in Medicine.

[52]  Shanfeng Wang,et al.  Physical properties and cellular responses to crosslinkable poly(propylene fumarate)/hydroxyapatite nanocomposites. , 2008, Biomaterials.

[53]  M. H. Fernandes,et al.  Micropatterned silica thin films with nanohydroxyapatite micro-aggregates for guided tissue regeneration. , 2012, Dental materials : official publication of the Academy of Dental Materials.

[54]  Nan Ma,et al.  Patterning human stem cells and endothelial cells with laser printing for cardiac regeneration. , 2011, Biomaterials.

[55]  Joss C. Cohen,et al.  Creation of a 3D printed temporal bone model from clinical CT data. , 2015, American journal of otolaryngology.

[56]  Bailiang Wang,et al.  Hydrated polysaccharide multilayer as an intraocular lens surface coating for biocompatibility improvements. , 2015, Journal of materials chemistry. B.

[57]  Frank Walther,et al.  Effects of Defects in Laser Additive Manufactured Ti-6Al-4V on Fatigue Properties , 2014 .

[58]  A. Bandyopadhyay,et al.  From CT Scan to Ceramic Bone Graft , 2003 .

[59]  Jun-Kyu Park,et al.  In vivo evaluation and characterization of a bio-absorbable drug-coated stent fabricated using a 3D-printing system , 2015 .

[60]  Stefan Stübinger,et al.  Histological and biomechanical analysis of porous additive manufactured implants made by direct metal laser sintering: a pilot study in sheep. , 2013, Journal of biomedical materials research. Part B, Applied biomaterials.

[61]  J. Veerkamp,et al.  Attachment of glycosaminoglycans to collagenous matrices modulates the tissue response in rats. , 2000, Biomaterials.

[62]  Tatiana Segura,et al.  Evolving the use of peptides as components of biomaterials. , 2011, Biomaterials.

[63]  Deng-Guang Yu,et al.  Novel drug delivery devices for providing linear release profiles fabricated by 3DP. , 2009, International journal of pharmaceutics.

[64]  A. Unsworth,et al.  The nature and dissemination of UHMWPE wear debris retrieved from periprosthetic tissue of THR. , 2003, Journal of biomedical materials research. Part A.

[65]  Thomas Tröster,et al.  On the fatigue crack growth behavior in 316L stainless steel manufactured by selective laser melting , 2014 .

[66]  A. Bandyopadhyay,et al.  Mechanical, in vitro antimicrobial, and biological properties of plasma-sprayed silver-doped hydroxyapatite coating. , 2012, ACS applied materials & interfaces.

[67]  Susmita Bose,et al.  Polycaprolactone-Coated 3D Printed Tricalcium Phosphate Scaffolds for Bone Tissue Engineering: In Vitro Alendronate Release Behavior and Local Delivery Effect on In Vivo Osteogenesis , 2014, ACS applied materials & interfaces.

[68]  R G Richards,et al.  Regulation of implant surface cell adhesion: characterization and quantification of S‐phase primary osteoblast adhesions on biomimetic nanoscale substrates , 2007, Journal of orthopaedic research : official publication of the Orthopaedic Research Society.

[69]  B R Ringeisen,et al.  Biological laser printing of genetically modified Escherichia coli for biosensor applications. , 2004, Biosensors & bioelectronics.

[70]  Peter X Ma,et al.  Suppression of apoptosis by enhanced protein adsorption on polymer/hydroxyapatite composite scaffolds. , 2007, Biomaterials.

[71]  M. von Walter,et al.  Structural, mechanical and in vitro characterization of individually structured Ti-6Al-4V produced by direct laser forming. , 2006, Biomaterials.

[72]  J. Hirsh,et al.  Medical device‐induced thrombosis: what causes it and how can we prevent it? , 2015, Journal of thrombosis and haemostasis : JTH.

[73]  K. Hidajat,et al.  Functionalized SBA-15 materials as carriers for controlled drug delivery: influence of surface properties on matrix-drug interactions. , 2005, Langmuir : the ACS journal of surfaces and colloids.

[74]  J. Y. Lim,et al.  Cell sensing and response to micro- and nanostructured surfaces produced by chemical and topographic patterning. , 2007, Tissue engineering.

[75]  Gianluca Ciardelli,et al.  Polyurethane-based scaffolds for myocardial tissue engineering , 2014, Interface Focus.

[76]  R. Hague,et al.  Laser sintering of polyamides and other polymers , 2012 .

[77]  W. Peukert,et al.  A novel process route for the production of spherical LBM polymer powders with small size and good flowability , 2014 .

[78]  H. M. Nielsen,et al.  Three-dimensional printing of drug-eluting implants: preparation of an antimicrobial polylactide feedstock material. , 2015, Journal of pharmaceutical sciences.

[79]  Philip Huie,et al.  Towards a Neurotransmitter-Based Retinal Prosthesis Using an Inkjet Print-head , 2003 .

[80]  B. R. Ringeisen,et al.  Cell patterning without chemical surface modification: Cell-cell interactions between printed bovine aortic endothelial cells (BAEC) on a homogeneous cell-adherent hydrogel , 2006 .

[81]  Vamsi Krishna Balla,et al.  Laser surface modification of 316 L stainless steel with bioactive hydroxyapatite. , 2013, Materials science & engineering. C, Materials for biological applications.

[82]  K. S. Siow,et al.  Plasma Methods for the Generation of Chemically Reactive Surfaces for Biomolecule Immobilization and Cell Colonization ‐ A Review , 2006 .

[83]  Yong Huang,et al.  Freeform drop-on-demand laser printing of 3D alginate and cellular constructs , 2015, Biofabrication.

[84]  B D Boyan,et al.  Role of material surfaces in regulating bone and cartilage cell response. , 1996, Biomaterials.

[85]  M. Wertheimer,et al.  VUV processing of polymers: Surface modification and deposition of organic thin films , 2007 .

[86]  D. Mooney,et al.  Alginate: properties and biomedical applications. , 2012, Progress in polymer science.

[87]  F. Melchels,et al.  A review on stereolithography and its applications in biomedical engineering. , 2010, Biomaterials.

[88]  B. Aksakal,et al.  Metallurgical failure analysis of various implant materials used in orthopedic applications , 2004 .

[89]  A. Bandyopadhyay,et al.  Induction Plasma Sprayed Nano Hydroxyapatite Coatings on Titanium for Orthopaedic and Dental Implants. , 2011, Surface & coatings technology.

[90]  S. Unnikrishnan,et al.  The antithrombotic and antimicrobial properties of PEG-protected silver nanoparticle coated surfaces. , 2012, Biomaterials.

[91]  Gordon G Wallace,et al.  3-dimensional (3D) fabricated polymer based drug delivery systems. , 2014, Journal of controlled release : official journal of the Controlled Release Society.

[92]  Xibing Gong,et al.  Review on powder-based electron beam additive manufacturing technology , 2012 .

[93]  Takehisa Matsuda,et al.  Human endothelial progenitor cell-seeded hybrid graft: proliferative and antithrombogenic potentials in vitro and fabrication processing. , 2003, Tissue engineering.

[94]  Jason A Inzana,et al.  3D printing of composite calcium phosphate and collagen scaffolds for bone regeneration. , 2014, Biomaterials.

[95]  A. Nanci,et al.  Enhancement of in vitro osteogenesis on titanium by chemically produced nanotopography. , 2007, Journal of biomedical materials research. Part A.

[96]  X. Liu,et al.  A hierarchically graded bioactive scaffold bonded to titanium substrates for attachment to bone. , 2011, Biomaterials.

[97]  A. Bandyopadhyay,et al.  Understanding of dopant-induced osteogenesis and angiogenesis in calcium phosphate ceramics. , 2013, Trends in biotechnology.

[98]  D. Dowling,et al.  Deposition of Non-Fouling PEO-Like Coatings Using a Low Temperature Atmospheric Pressure Plasma Jet , 2016 .

[99]  Cameron J Wilson,et al.  Mediation of biomaterial-cell interactions by adsorbed proteins: a review. , 2005, Tissue engineering.

[100]  M. Jeyam,et al.  Synergistic effect of particles and cyclic pressure on cytokine production in human monocyte/macrophages: proposed role in periprosthetic osteolysis. , 2002, Bone.

[101]  Aijie Chen,et al.  Central nervous system toxicity of metallic nanoparticles , 2015, International journal of nanomedicine.

[102]  L. Setti,et al.  An amperometric glucose biosensor prototype fabricated by thermal inkjet printing. , 2005, Biosensors & bioelectronics.

[103]  Taku Yamazaki,et al.  Development of A Hybrid Multi-tasking Machine Tool: Integration of Additive Manufacturing Technology with CNC Machining , 2016 .

[104]  Toshio Igarashi,et al.  Influence of surface wettability on competitive protein adsorption and initial attachment of osteoblasts , 2009, Biomedical materials.

[105]  Paula T. Hammond,et al.  Engineering materials layer‐by‐layer: Challenges and opportunities in multilayer assembly , 2011 .

[106]  Dongxu Ke,et al.  Additive manufacturing of biomaterials. , 2018, Progress in materials science.

[107]  W. Brantley,et al.  Comparison of the bond strength of laser-sintered and cast base metal dental alloys to porcelain. , 2008, Dental materials : official publication of the Academy of Dental Materials.

[108]  D. Puleo,et al.  Understanding and controlling the bone-implant interface. , 1999, Biomaterials.

[109]  O. Hermanson,et al.  Inkjet printing of macromolecules on hydrogels to steer neural stem cell differentiation. , 2007, Biomaterials.

[110]  M. Maitz,et al.  Current strategies towards hemocompatible coatings , 2007 .

[111]  S. Snyder,et al.  Printing-Assisted Surface Modifications of Patterned Ultrafiltration Membranes. , 2016, ACS applied materials & interfaces.

[112]  A. Bandyopadhyay,et al.  Compositionally graded hydroxyapatite/tricalcium phosphate coating on Ti by laser and induction plasma. , 2011, Acta biomaterialia.

[113]  R. Marti,et al.  Fluid Pressure Causes Bone Resorption in a Rabbit Model of Prosthetic Loosening , 1998, Clinical orthopaedics and related research.

[114]  K. Gleason,et al.  Initiated chemical vapor deposition of trivinyltrimethylcyclotrisiloxane for biomaterial coatings. , 2006, Langmuir : the ACS journal of surfaces and colloids.

[115]  Shiping Zhu,et al.  Protein resistant surfaces: Comparison of acrylate graft polymers bearing oligo-ethylene oxide and phosphorylcholine side chains , 2006, Biointerphases.

[116]  Bradley R Ringeisen,et al.  Jet‐based methods to print living cells , 2006, Biotechnology journal.

[117]  F. Cui,et al.  F+ ion implantation induced cell attachment on intraocular lens. , 1999, Biomaterials.

[118]  Daeho Lee,et al.  Highly crystalline Ni/NiO hybrid electrodes processed by inkjet printing and laser-induced reductive sintering under ambient conditions. , 2016, Nanoscale.

[119]  John Fisher,et al.  The role of macrophages in osteolysis of total joint replacement. , 2005, Biomaterials.

[120]  T. Boland,et al.  Human microvasculature fabrication using thermal inkjet printing technology. , 2009, Biomaterials.

[121]  Julian H. George,et al.  Exploring and Engineering the Cell Surface Interface , 2005, Science.

[122]  Yoshiaki Hirano,et al.  Peptide and Protein Presenting Materials for Tissue Engineering , 2004 .

[123]  H. Kessler,et al.  Mimicking bone extracellular matrix: integrin-binding peptidomimetics enhance osteoblast-like cells adhesion, proliferation, and differentiation on titanium. , 2015, Colloids and surfaces. B, Biointerfaces.

[124]  Dominik Rietzel,et al.  Additive Processing of Polymers , 2008 .

[125]  Susmita Bose,et al.  SiO2 and ZnO dopants in three-dimensionally printed tricalcium phosphate bone tissue engineering scaffolds enhance osteogenesis and angiogenesis in vivo. , 2013, Acta biomaterialia.

[126]  Amit Bandyopadhyay,et al.  Engineered porous metals for implants , 2008 .

[127]  M. Alexander,et al.  3D printing of tablets containing multiple drugs with defined release profiles. , 2015, International journal of pharmaceutics.

[128]  A. Bandyopadhyay,et al.  In Vivo Response of Laser Processed Porous Titanium Implants for Load-Bearing Implants , 2016, Annals of Biomedical Engineering.

[129]  Xiaojian Ye,et al.  3D-printed hierarchical scaffold for localized isoniazid/rifampin drug delivery and osteoarticular tuberculosis therapy. , 2015, Acta biomaterialia.