Experimental investigation of composite patches with a full-field measurement method

The aim of this work is to study the displacement and strain fields on the surface of a composite patch used to reinforce metallic structures. The analysis focuses on the stress evaluation in both the composite and the adhesive. Shear stress concentrations exist in particular in the adhesive because of the progressive load transfer from the substrate to the patch along the so-called transfer length. The grid method is used for this purpose. Analysis of uniaxial tensile tests shows progressive load transfers in the longitudinal direction and also in the transverse direction, the latter due to Poisson's ratios. Complex couplings between longitudinal and transverse directions are also observed near the free edges of the patch. Bidimensional phenomena are compared to results obtained from a usual unidimensional theoretical approach.

[1]  L. Hart-Smith.  A peel-type durability test coupon to assess interfaces in bonded, co-bonded, and co-cured composite structures , 1999 .

[2]  John Morton,et al.  Improved theoretical solutions for adhesive lap joints , 1998 .

[3]  M. Leeming,et al.  Strengthening of reinforced concrete structures : using externally-bonded FRP composites in structural and civil engineering , 1999 .

[4]  M. Grédiac,et al.  A detailed study of crack propagation in cement-based fibre composite beams under bending , 2005 .

[5]  C Soutis,et al.  Design and performance of bonded patch repairs of composite structures , 1997 .

[6]  Michel Grédiac,et al.  Producing and transferring low-spatial-frequency grids for measuring displacement fields with moiré and grid methods , 2004 .

[7]  Y. Surrel,et al.  Experimental evidence of the cross-section warping in short composite beams under three point bending , 2001 .

[8]  L. J. Hart-Smith,et al.  Analytical approach to bonded repair of elliptical dent, corrosion grind-out, and cut-out , 2001 .

[9]  Fabrice Pierron,et al.  Whole-field assessment of the effects of boundary conditions on the strain field in off-axis tensile testing of unidirectional composites , 1998 .

[10]  Stéphane Avril,et al.  A full-field optical method for the experimental analysis of reinforced concrete beams repaired with composites , 2004 .

[11]  C. Soutis,et al.  Failure Analysis of Scarf-Patch-Repaired Carbon Fiber/Epoxy Laminates Under Compression , 2000 .

[12]  Michel Grédiac,et al.  Applying a genetic algorithm to the optimization of composite patches , 2006 .

[13]  A. Baker.  Repair of cracked or defective metallic aircraft components with advanced fibre composites—an overview of Australian work , 1984 .

[14]  Constantinos Soutis,et al.  Strength prediction of patch-repaired CFRP laminates loaded in compression , 2000 .

[15]  Fabrice Pierron,et al.  Novel procedure for complete in-plane composite characterization using a single T-shaped specimen , 1999 .