Modelling creep tests in HMPE fibres used in ultra-deep-sea mooring ropes

Due to its low density and high strength, HMPE (high modulus polyethylene) fibres are being increasingly used in synthetic ropes for offshore mooring. Nevertheless, the occurrence of creep at sea temperature can be a shortcoming for its practical use. Creep tests performed at different load levels in a sub-system of the HMPE rope (yarn) are frequently used as a first step to obtain some information about the susceptibility to creep deformation at a given temperature. The present paper is concerned with the phenomenological modelling of creep tests in HMPE yarns. In this macroscopic approach, besides the classical variables (stress, total strain), an additional scalar variable related with the damage induced by creep process is introduced. An evolution law is proposed for this damage variable. The predicted lifetimes and elongations of HMPE specimens in creep tests at different load levels and room temperature are compared with experimental results showing a good agreement.

[1]  Ivan Napoleão Bastos,et al.  A simple model for slow strain rate and constant load corrosion tests of austenitic stainless steel in acid aqueous solution containing sodium chloride , 2008 .

[2]  J. Chaboche,et al.  Mechanics of Solid Materials , 1990 .

[3]  M. Mertens,et al.  Creep as a design tool for HMPE ropes in long term marine and offshore applications , 2001, MTS/IEEE Oceans 2001. An Ocean Odyssey. Conference Proceedings (IEEE Cat. No.01CH37295).

[4]  S. Amico,et al.  Socketing of polyester fibre ropes with epoxy resins for deep-water mooring applications , 2006 .

[5]  L. Fambri,et al.  High‐density polyethylene/cycloolefin copolymer blends, part 2: Nonlinear tensile creep , 2006 .

[6]  Patrice Cartraud,et al.  Analytical modeling of synthetic fiber ropes subjected to axial loads. Part I: A new continuum model for multilayered fibrous structures , 2007 .

[7]  A. Penlidis,et al.  A Practical Approach to Modeling Time-Dependent Nonlinear Creep Behavior of Polyethylene for Structural Applications , 2008 .

[8]  I. M. Ward,et al.  Creep and recovery of ultra high modulus polyethylene , 1981 .

[9]  Michael Craig,et al.  Polyester mooring for the Mad Dog spar—design issues and other considerations , 2005 .

[10]  A simple continuum damage model for adhesively bonded butt joints , 2004 .

[11]  Antonio Carlos Fernandes,et al.  Distorted polyester lines for model testing of offshore moored platforms , 2005 .

[12]  I. M. Ward,et al.  Creep behavior of ultrahigh‐modulus polyethylene: Influence of draw ratio and polymer composition , 1984 .

[13]  I. Ward,et al.  Creep and stress-relaxation in ultra-high modulus linear polyethylene , 1984 .

[14]  G. Blès,et al.  Experimental study of the cyclic visco-elasto-plastic behaviour of a polyamide fibre strap , 2009 .

[15]  Nicholas John Pearson.  Experimental Snap Loading of Synthetic Fiber Ropes , 2002 .

[16]  I. Ward.  Ultrahigh Modulus Polymers , 1977 .

[17]  Michael J. King,et al.  A continuum constitutive model for the mechanical behavior of woven fabrics including slip and failure , 2005 .

[18]  I. M. Ward,et al.  Tensile creep and recovery in ultra-high modulus linear polyethylenes , 1978 .

[19]  Ivan De Pellegrin.  Manmade Fiber Ropes in Deepwater Mooring Applications , 1999 .

[20]  Eric B. Williamson,et al.  Degradation of rope properties under increasing monotonic load , 2005 .

[21]  I. Ward,et al.  The creep behaviour of isotropic polyethylene , 1999 .