Synthesis and thermal stability of amorphous Be–B–X alloy coatings

[1]  M. Wall,et al.  Crystallization of beryllium-boron metallic glasses , 2003 .

[2]  M. Wall,et al.  From nanocrystalline to amorphous structure in beryllium-based coatings , 2002 .

[3]  W. Johnson Bulk Glass-Forming Metallic Alloys: Science and Technology , 1999 .

[4]  T. Nieh,et al.  Improved Microyield Strength in Beryllium Produced by Vapor Deposition , 1998 .

[5]  R. Cook,et al.  Sputter-deposited Be ablators for NIF target capsules , 1997 .

[6]  J. P. Hayes,et al.  Formation of cubic boron-nitride by the reactive sputter deposition of boron , 1997 .

[7]  W. Johnson,et al.  Formation of Ti–Zr–Cu–Ni bulk metallic glasses , 1995 .

[8]  Peter A. Amendt,et al.  Design and modeling of ignition targets for the National Ignition Facility , 1995 .

[9]  W. Johnson,et al.  A highly processable metallic glass: Zr41.2Ti13.8Cu12.5Ni10.0Be22.5 , 1993 .

[10]  G. Pharr,et al.  Microstructures and mechanical properties of thin films of aluminum oxide , 1991 .

[11]  S. Poon,et al.  Mechanical properties of partially crystallized aluminum based metallic glasses , 1991 .

[12]  T. Nieh,et al.  Hot indentation tests of refractory metal beryllides , 1990 .

[13]  E. J. Hsieh,et al.  Summary Abstract: Studies of internal stresses and surface roughness of sputtered Be and BeB films , 1987 .

[14]  William D. Nix,et al.  A method for interpreting the data from depth-sensing indentation instruments , 1986 .

[15]  C. Boothroyd,et al.  Specimen preparation methods for the examination of surfaces and interfaces in the transmission electron microscope , 1985 .

[16]  J. B. Holt,et al.  Beryllium-containing high specific strength amorphous alloys , 1980 .

[17]  I. W. Donald,et al.  Prediction of glass-forming ability for metallic systems , 1978 .

[18]  K.J.H. Mackay,et al.  Lattice parameter and hardness measurements on high purity beryllium , 1963 .

[19]  David Turnbull,et al.  Kinetics of Heterogeneous Nucleation , 1950 .

[20]  A. Inoue,et al.  Ultrahigh Strength of Rapidly Solidified Al96−xCr3Ce1Cox (x=1, 1.5 and 2%) Alloys Containing an Icosahedral Phase as a Main Component , 1994 .

[21]  A. Inoue,et al.  ULTRAHIGH TENSILE STRENGTHS OF AL88Y2NI9M1(M = MN OR FE) AMORPHOUS ALLOYS CONTAINING FINELY DISPERSED FCC-AL PARTICLES , 1990 .

[22]  C. W. Chen,et al.  Optimization of the sputter‐deposition process for preparing smooth coatings of beryllium on microspherical substrates , 1988 .

[23]  David Turnbull,et al.  Rate of Nucleation in Condensed Systems , 1949 .