The greenhouse gas emissions and mitigation options for materials used in UK construction

The UK construction industry faces the daunting task of replacing and extending a significant proportion of UK infrastructure, meeting a growing housing shortage and retrofitting millions of homes whilst achieving greenhouse gas (GHG) emission reductions compatible with the UK's legally binding target of an 80% reduction by 2050. This paper presents a detailed time series of embodied GHG emissions from the construction sector for 1997–2011. This data is used to demonstrate that strategies which focus solely on improving operational performance of buildings and the production efficiencies of domestic material producers will be insufficient to meet sector emission reduction targets. Reductions in the order of 80% will require a substantial decline in the use of materials with carbon-intensive supply chains. A variety of alternative materials, technologies and practices are available and the common barriers to their use are presented based upon an extensive literature survey. Key gaps in qualitative research, data and modelling approaches are also identified. Subsequent discussion highlights the lack of client and regulatory drivers for uptake of alternatives and the ineffective allocation of responsibility for emissions reduction within the industry. Only by addressing and overcoming all these challenges in combination can the construction sector achieve drastic emissions reduction.

[1]  Martin Skitmore,et al.  Challenges facing carbon dioxide labelling of construction materials , 2013 .

[2]  G. Corder,et al.  Costs and carbon emissions for geopolymer pastes in comparison to ordinary portland cement , 2011 .

[3]  Richard Stewart Composites in construction advance in new directions , 2011 .

[4]  Adolf Acquaye,et al.  Operational vs. embodied emissions in buildings—A review of current trends , 2013 .

[5]  J. Allwood Transitions to material efficiency in the UK steel economy , 2013, Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences.

[6]  Robert A. Kozak,et al.  Wood use in nonresidential buildings: Opportunities and barriers , 2004 .

[7]  Peter E.D. Love,et al.  A hybrid life cycle assessment method for construction , 2000 .

[8]  A. Valle,et al.  Diffusion of nuclear energy in some developing countries , 2014 .

[9]  Robert Le Roy,et al.  Reducing environmental impact by increasing the strength of concrete: quantification of the improvement to concrete bridges , 2012 .

[10]  Mohamed Osmani,et al.  Feasibility of zero carbon homes in England by 2016: a house builder's perspective , 2009 .

[11]  Julian M. Allwood,et al.  The development of a hot rolling process for variable cross-section I-beams , 2012 .

[12]  Phil Purnell,et al.  Embodied carbon dioxide in concrete: Variation with common mix design parameters , 2012 .

[13]  Rémy Gourdon,et al.  Environmental and technical assessments of the potential utilization of sewage sludge ashes (SSAs) as secondary raw materials in construction. , 2013, Waste management.

[14]  Barry Goodchild,et al.  Towards Zero Carbon Homes in England? From Inception to Partial Implementation , 2011 .

[15]  D. J. Bonnett,et al.  Ultra low U-value walls for low-carbon-dioxide homes , 2008 .

[16]  C. Nathani Chapter 10 Analysing the Economic Impacts of a Material Efficiency Strategy , 2009 .

[17]  M. Allen,et al.  Cumulative carbon emissions, emissions floors and short-term rates of warming: implications for policy , 2011, Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences.

[18]  S. Thomas Ng,et al.  Carbon dioxide reduction in the building life cycle: a critical review , 2012 .

[19]  Sue Halliwell,et al.  FRPs — The Environmental Agenda , 2010 .

[20]  Julian M Allwood,et al.  Reusing steel and aluminum components at end of product life. , 2012, Environmental science & technology.

[21]  Krushna Mahapatra,et al.  Perceptions, attitudes and interest of Swedish architects towards the use of wood frames in multi-storey buildings , 2011 .

[22]  Corinne Le Quéré,et al.  Climate Change 2013: The Physical Science Basis , 2013 .

[23]  V. Li,et al.  Concrete Reinforcement with Recycled Fibers , 2000 .

[24]  Steve Goodhew,et al.  The potential for using geopolymer concrete in the UK , 2013 .

[25]  Hacène Houari,et al.  Use of Recycled Aggregates in Concrete , .

[26]  Manfred Lenzen,et al.  Development of an embedded carbon emissions indicator: Producing a time series of input-output tables and embedded carbon dioxide emissions for the UK by using a MRIO data optimisation system , 2008 .

[27]  Anders Roos,et al.  The Influence of Architects and Structural Engineers on Timber in Construction - Perceptions and Roles , 2010 .

[28]  G. Killip,et al.  The 40% house , 2006 .

[29]  Leif Gustavsson,et al.  General Conditions for Construction of Multi-storey Wooden Buildings in Western Europe , 2009 .

[30]  P. Bowen,et al.  Changes in portlandite morphology with solvent composition: Atomistic simulations and experiment , 2011 .

[31]  David Pennington,et al.  Recent developments in Life Cycle Assessment. , 2009, Journal of environmental management.

[32]  Julian M. Allwood,et al.  Sustainable Materials - With Both Eyes Open , 2012 .

[33]  Peter E.D. Love,et al.  Factors influencing the adaptive re‐use of buildings , 2011 .

[34]  Steve Goodhew,et al.  Briefing: Challenges related to straw bale construction , 2010 .

[35]  S. Sorrell,et al.  Making the link: climate policy and the reform of the UK construction industry , 2003 .

[36]  Anne Power,et al.  Does demolition or refurbishment of old and inefficient homes help to increase our environmental, social and economic viability? , 2008 .

[37]  Gang Liu,et al.  Carbon emissions of infrastructure development. , 2013, Environmental science & technology.

[38]  Chao Zhang,et al.  Application of non-conventional materials in construction , 2011 .

[39]  Lianyang Zhang,et al.  Production of bricks from waste materials – A review , 2013 .

[40]  R. A. Smith,et al.  THE CONSTRUCTION INDUSTRY MASS BALANCE: RESOURCE USE, WASTES AND EMISSIONS , 2002 .

[41]  Lukas H. Meyer,et al.  Summary for Policymakers , 2022, The Ocean and Cryosphere in a Changing Climate.

[42]  Kate Scott,et al.  Meeting the UK climate change challenge: The contribution of resource efficiency , 2009 .

[43]  Appu Haapio,et al.  Environmental effect of structural solutions and building materials to a building , 2008 .

[44]  Stefan Gold,et al.  Consumer attitudes towards timber as a construction material and towards timber frame houses – selected findings of a representative survey among the German population , 2009 .

[45]  Edgar G. Hertwich,et al.  Evaluation of process- and input-output-based life cycle inventory data with regard to truncation and aggregation issues. , 2011, Environmental science & technology.

[46]  J. O N A T H A,et al.  Options for Achieving a 50 % Cut in Industrial Carbon Emissions by 2050 , 2010 .

[47]  e-Comms Team National Infrastructure Plan 2010 , 2010 .

[48]  Dellé Odeleye,et al.  Sustainable materials: issues in implementing resource efficiency – A UK policy & planning perspective , 2010 .

[49]  Corinne Le Quéré,et al.  The challenge to keep global warming below 2 °C , 2013 .

[50]  Christopher R. Iddon,et al.  Embodied and operational energy for new-build housing: A case study of construction methods in the UK , 2013 .

[51]  Bill Addis,et al.  Building with Reclaimed Components and Materials: A Design Handbook for Reuse and Recycling , 2006 .

[52]  K. Williams,et al.  What is stopping sustainable building in England? Barriers experienced by stakeholders in delivering sustainable developments , 2007 .

[53]  Jia Li,et al.  Technological, economic and financial prospects of carbon dioxide capture in the cement industry , 2013 .

[54]  R. Siddique,et al.  Use of recycled plastic in concrete: a review. , 2008, Waste management.

[55]  Jeanne. McKeague,et al.  On adaptive reuse , 1978 .

[56]  S. Solomon,et al.  Cumulative carbon as a policy framework for achieving climate stabilization , 2012, Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences.

[57]  Alireza Bahadori,et al.  Global strategies and potentials to curb CO2 emissions in cement industry , 2013 .

[58]  Germán Ferreira,et al.  Uses of alternative fuels and raw materials in the cement industry as sustainable waste management options , 2013 .

[59]  Colin MacDougall,et al.  Natural Building Materials in Mainstream Construction: Lessons from the U. K. , 2008 .

[60]  Erle C. Ellis Anthropogenic transformation of the terrestrial biosphere , 2011, Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences.

[61]  Peter Walker The good old ways , 2007 .

[62]  Manfred Lenzen,et al.  Errors in Conventional and Input‐Output—based Life—Cycle Inventories , 2000 .

[63]  Lei Wang,et al.  Use of wood in green building: a study of expert perspectives from the UK , 2014 .

[64]  H. Haberl,et al.  Growth in global materials use, GDP and population during the 20th century , 2009 .

[65]  Randall A. Cantrell,et al.  A categorical modeling approach to analyzing new product adoption and usage in the context of the building-materials industry , 2010 .

[66]  Rachel Woodward,et al.  Cement and concrete flow analysis in a rapidly expanding economy: Ireland as a case study , 2011 .

[67]  John L. Provis,et al.  Technical and commercial progress in the adoption of geopolymer cement , 2012 .

[68]  Gjalt Huppes,et al.  Methods for Life Cycle Inventory of a product , 2005 .

[69]  Manfred Lenzen,et al.  Consumption-based GHG emission accounting: a UK case study , 2013 .

[70]  Helga Weisz,et al.  Reducing energy and material flows in cities , 2010 .

[71]  Aaron R. Sakulich,et al.  Reinforced geopolymer composites for enhanced material greenness and durability , 2011 .

[72]  S. Joshi Product Environmental Life‐Cycle Assessment Using Input‐Output Techniques , 1999 .

[73]  Mohamed Osmani,et al.  Is the Recession Jeopardizing the 2016 Zero Carbon Homes Agenda in England , 2012 .