Catalyst optimization and reduction condition of continuous growth of carbon nanotubes on carbon fiber surface

[1]  Haotian Jiang,et al.  In‐situ growth of bamboo‐like carbon nanotubes from Cu catalyst on continuous carbon fibre for interfacial enhancement , 2023, Composites Science and Technology.

[2]  K. Yun,et al.  Effect of interfacial transition layer with CNTs on fracture toughness and failure mode of carbon fiber reinforced aluminum matrix composites , 2022, Composites Part A: Applied Science and Manufacturing.

[3]  Haotian Jiang,et al.  Continuous in-situ growth of carbon nanotubes on carbon fibers at various temperatures for efficient electromagnetic wave absorption , 2022, Carbon.

[4]  Yan-xiang Wang,et al.  Growth of carbon nanotubes on carbon fiber at relatively low temperature for improved interfacial adhesion with epoxy , 2022, Journal of Materials Science.

[5]  Feng Zhang,et al.  Kinetics-Controlled Growth of Metallic Single-Wall Carbon Nanotubes from CoRex Nanoparticles. , 2022, ACS nano.

[6]  Yudong Huang,et al.  Enhanced both in-plane and through-thickness thermal conductivity of carbon fiber/epoxy composites by fabricating high thermal conductive coaxial PAN/PBO carbon fibers , 2022, Composites Part B: Engineering.

[7]  Yingze Li,et al.  A Mussel-inspired Strategy for CNT/carbon Fiber Reinforced Epoxy Composite by Hierarchical Surface Modification , 2021, Colloids and Surfaces A: Physicochemical and Engineering Aspects.

[8]  L. Mészáros,et al.  Moisture dependent tensile and creep behaviour of multi-wall carbon nanotube and carbon fibre reinforced, injection moulded polyamide 6 matrix multi-scale composites , 2021, Journal of Materials Research and Technology.

[9]  Nan Zhao,et al.  Chemical vapor deposition growth of single-walled carbon nanotubes from plastic polymers , 2021, Carbon.

[10]  C. Bichara,et al.  Dynamic Instability of Individual Carbon Nanotube Growth Revealed by In Situ Homodyne Polarization Microscopy. , 2021, Nano letters.

[11]  Chengguo Wang,et al.  Study on Bimetallic Catalysts for Carbon Nanotube Growth on the Surface of Continuous Carbon Fibres , 2021, ECS Journal of Solid State Science and Technology.

[12]  Wang Yongbo,et al.  Continuous growth of carbon nanotubes on the surface of carbon fibers for enhanced electromagnetic wave absorption properties , 2021, Ceramics International.

[13]  S. Fu,et al.  Temperature-dependent mechanical properties of polyetherimide composites reinforced by graphene oxide-coated short carbon fibers , 2021 .

[14]  Chengguo Wang,et al.  Growing carbon nanotubes on continuous carbon fibers to produce composites with improved interfacial properties: A step towards commercial production and application , 2021, Composites Science and Technology.

[15]  Yan-xiang Wang,et al.  Optimization of Process Conditions for Continuous Growth of CNTs on the Surface of Carbon Fibers , 2021, Journal of Composites Science.

[16]  Chengguo Wang,et al.  Growth of carbon nanotubes on the surface of carbon fiber using Fe–Ni bimetallic catalyst at low temperature , 2021 .

[17]  T. Walsh,et al.  Carbon fibre surface chemistry and its role in fibre-to-matrix adhesion. , 2021, Journal of Materials Chemistry A.

[18]  Chengguo Wang,et al.  Preparation carbon nanotube-decorated carbon fibers under low pressure for epoxy-based unidirectional hierarchical composites with enhanced interlaminar shear strength , 2021 .

[19]  Chengguo Wang,et al.  Fex-Co1-x bimetallic catalysts for highly efficient growth of carbon nanotubes on carbon fibers , 2020 .

[20]  L. Qi,et al.  On the role of carbon nanotubes addition in carbon fiber-reinforced magnesium matrix composites , 2020, Journal of Materials Science.

[21]  Chengguo Wang,et al.  Interfacial improvement of carbon fiber/epoxy composites using one-step method for grafting carbon nanotubes on the fibers at ultra-low temperatures , 2020 .

[22]  Xiaoru Li,et al.  Establishment of multistage gradient modulus intermediate layer between fiber and matrix via designing double “rigid-flexible” structure to improve interfacial and mechanical properties of carbon fiber/resin composites , 2020 .

[23]  Linbao Zheng,et al.  Uniform growth of carbon nanotubes on carbon fiber cloth after surface oxidation treatment to enhance interfacial strength of composites , 2020 .

[24]  C. Charitidis,et al.  Comparative Physical–Mechanical Properties Assessment of Tailored Surface-Treated Carbon Fibres , 2020, Materials.

[25]  Guangzeng Liu,et al.  Robust S-doped TiO2@N,S-codoped carbon nanotube arrays as free-binder anodes for efficient sodium storage , 2020 .

[26]  Xiaodong He,et al.  Grafting carbon nanotubes densely on carbon fibers by poly(propylene imine) for interfacial enhancement of carbon fiber composites , 2020 .

[27]  Jian Xu,et al.  Microstructure and properties of polyacrylonitrile based carbon fibers , 2020 .

[28]  Hua Yuan,et al.  Carbon nanotube/carbon fiber electrodes via chemical vapor deposition for simultaneous determination of ascorbic acid, dopamine and uric acid , 2020 .

[29]  R. Xiang,et al.  Regrowth and catalytic etching of individual single-walled carbon nanotubes studied by isotope labeling and growth interruption , 2019 .

[30]  Woong‐Ryeol Yu,et al.  Improved tensile strength of carbon nanotube-grafted carbon fiber reinforced composites , 2019, Composite Structures.

[31]  Tae Ann Kim,et al.  Highly improved interfacial affinity in carbon fiber-reinforced polymer composites via oxygen and nitrogen plasma-assisted mechanochemistry , 2019, Composites Part B: Engineering.

[32]  Tie-hu Li,et al.  Mechanical properties and oxidation resistance of phenolic formaldehyde interlocking CNTs-Cf/SiC composite , 2019, Ceramics International.

[33]  Hejun Li,et al.  An analysis of the factors affecting strengthening in carbon fiber reinforced magnesium composites , 2019, Composite Structures.

[34]  Evan K. Wujcik,et al.  Interfacially reinforced carbon fiber/epoxy composite laminates via in-situ synthesized graphitic carbon nitride (g-C3N4) , 2019, Composites Part B: Engineering.

[35]  J. Qiu,et al.  Carbon nanotubes / epoxy resin metacomposites with adjustable radio-frequency negative permittivity and low dielectric loss , 2019, Ceramics International.

[36]  R. Ansari,et al.  Micromechanical analysis of carbon nanotube-coated fiber-reinforced hybrid composites , 2018, International Journal of Engineering Science.

[37]  M. Hassanzadeh-Aghdam,et al.  Effect of CNT coating on the overall thermal conductivity of unidirectional polymer hybrid nanocomposites , 2018, International Journal of Heat and Mass Transfer.

[38]  Linbao Zheng,et al.  Synthesis and growth mechanism of carbon nanotubes growing on carbon fiber surfaces with improved tensile strength , 2018, Nanotechnology.

[39]  Zhanhu Guo,et al.  Layer-by-layer grafting CNTs onto carbon fibers surface for enhancing the interfacial properties of epoxy resin composites , 2018 .

[40]  Woong‐Ryeol Yu,et al.  Low-temperature grafting of carbon nanotubes on carbon fibers using a bimetallic floating catalyst , 2016 .

[41]  Chengguo Wang,et al.  High efficient preparation of carbon nanotube-grafted carbon fibers with the improved tensile strength , 2016 .

[42]  Woong‐Ryeol Yu,et al.  Improved tensile strength of carbon fibers undergoing catalytic growth of carbon nanotubes on their surface , 2013 .