FEA Study on the Stress Distributions in the Polymer Coatings of Cardiovascular Drug-Eluting Stent Medical Devices

[1]  Chang-Soo Kim,et al.  FEA Study on the Stress Distributions in the Polymer Coatings of Cardiovascular Drug-Eluting Stent Medical Devices , 2014, Annals of Biomedical Engineering.

[2]  Guillaume Parry,et al.  Potential-based and non-potential-based cohesive zone formulations under mixed-mode separation and over-closure. Part I: Theoretical analysis , 2014 .

[3]  Guillaume Parry,et al.  Potential-based and non-potential-based cohesive zone formulations under mixed-mode separation and over-closure-Part II: Finite element applications , 2014 .

[4]  P. McHugh,et al.  A combined computational and experimental methodology to determine the adhesion properties of stent polymer coatings , 2013 .

[5]  P. McGarry,et al.  An analytical solution for the stress state at stent-coating interfaces. , 2012, Journal of the mechanical behavior of biomedical materials.

[6]  Duane S. Cronin,et al.  Uniform Expansion of a Polymeric Helical Stent , 2012 .

[7]  Lorenza Petrini,et al.  Finite element analyses for design evaluation of biodegradable magnesium alloy stents in arterial vessels , 2011 .

[8]  L. Räber,et al.  Current status of drug-eluting stents. , 2011, Cardiovascular therapeutics.

[9]  Patrick W Serruys,et al.  Bioresorbable Scaffold: The Advent of a New Era in Percutaneous Coronary and Peripheral Revascularization? , 2011, Circulation.

[10]  P. Serruys,et al.  Coronary stents: looking forward. , 2010, Journal of the American College of Cardiology.

[11]  W. Carroll,et al.  A platinum-chromium steel for cardiovascular stents. , 2010, Biomaterials.

[12]  Frank Witte,et al.  The history of biodegradable magnesium implants: a review. , 2010, Acta biomaterialia.

[13]  P. McHugh,et al.  Computational Investigation of the Delamination of Polymer Coatings During Stent Deployment , 2010, Annals of Biomedical Engineering.

[14]  Y. Levy,et al.  Evaluation of drug-eluting stents' coating durability--clinical and regulatory implications. , 2009, Journal of biomedical materials research. Part B, Applied biomaterials.

[15]  Caitríona Lally,et al.  The influence of plaque composition on underlying arterial wall stress during stent expansion: the case for lesion-specific stents. , 2009, Medical engineering & physics.

[16]  Caitríona Lally,et al.  Determination of the influence of stent strut thickness using the finite element method: implications for vascular injury and in-stent restenosis , 2009, Medical & Biological Engineering & Computing.

[17]  Anders Kristensson,et al.  Suggestion of Potential Stent Design Parameters to Reduce Restenosis Risk driven by Foreshortening or Dogboning due to Non-uniform Balloon-Stent Expansion , 2008, Annals of Biomedical Engineering.

[18]  B Verhegghe,et al.  Numerical study of the uniformity of balloon-expandable stent deployment. , 2008, Journal of biomechanical engineering.

[19]  P. Serruys,et al.  The future of drug-eluting stents. , 2008, Pharmacological research.

[20]  Isam Faik,et al.  Effects of diffusion coefficients and struts apposition using numerical simulations for drug eluting coronary stents. , 2007, Journal of biomechanical engineering.

[21]  R. Jaffe,et al.  Late and very late thrombosis of drug-eluting stents: evolving concepts and perspectives. , 2007, Journal of the American College of Cardiology.

[22]  Guang-Ling Song,et al.  Control of biodegradation of biocompatable magnesium alloys , 2007 .

[23]  Marc D Feldman,et al.  Coronary stents: a materials perspective. , 2007, Biomaterials.

[24]  Michael Joner,et al.  Drug-Eluting Stent and Coronary Thrombosis: Biological Mechanisms and Clinical Implications , 2007, Circulation.

[25]  K. Robinson,et al.  Scanning electron microscopic analysis of defects in polymer coatings of three commercially available stents: comparison of BiodivYsio, Taxus and Cypher stents. , 2007 .

[26]  Garrett J. Hall,et al.  Comparison of element technologies for modeling stent expansion. , 2006, Journal of biomechanical engineering.

[27]  P. Prendergast,et al.  Cardiovascular stent design and vessel stresses: a finite element analysis. , 2005, Journal of biomechanics.

[28]  C. Roberts,et al.  Characterization of Drug Particle Surface Energetics and Young’s Modulus by Atomic Force Microscopy and Inverse Gas Chromatography , 2005, Pharmaceutical Research.

[29]  Min Qi,et al.  Finite Element Analysis of a Stent Implantation in a Stenosed Artery , 2005 .

[30]  Peter E. McHugh,et al.  Analysis of the mechanical performance of a cardiovascular stent design based on micromechanical modelling , 2004 .

[31]  F. Auricchio,et al.  Mechanical behavior of coronary stents investigated through the finite element method. , 2002, Journal of biomechanics.

[32]  M. Enoki,et al.  Fatigue behavior and coating failure of polymer coated drug eluting stent , 2011 .

[33]  Weiqiang Wang,et al.  Stent expansion in curved vessel and their interactions: a finite element analysis. , 2007, Journal of biomechanics.

[34]  Weiqiang Wang,et al.  Analysis of the transient expansion behavior and design optimization of coronary stents by finite element method. , 2006, Journal of biomechanics.

[35]  Lorenza Petrini,et al.  A predictive study of the mechanical behaviour of coronary stents by computer modelling. , 2005, Medical engineering & physics.