Introduction to the damage tolerance behaviour of railway rails – a review

Despite substantial advantages in material development and in periodic non-destructive inspection together with periodic grinding and other measures in order to guarantee safe service, fatigue crack propagation and fracture is still in great demand as emphasised by the present special issue. Rails, as the heart of the railway system, are subjected to very high service loads and harsh environmental conditions. Since any potential rail breakage includes the risk of catastrophic derailment of vehicles, it is of paramount interest to avoid such a scenario. The aim of the present paper is to introduce the most important questions regarding crack propagation and fracture of rails. These include the loading conditions: contact forces from the wheel and thermal stresses due to restrained elongation of continuously welded rails together with residual stresses from manufacturing and welding in the field, which is discussed in Section 2. Section 3 provides an overview of crack-type rail defects and potential failure scenarios. Finally the stages of crack propagation from initiation up to final breakage are discussed.

[1]  G. C. Sih,et al.  Three-dimensional transverse fatigue crack growth in rail head , 1984 .

[2]  Oscar Orringer,et al.  Theoretical and numerical analyses , 1992 .

[3]  Leon M Keer,et al.  Some factors influencing the transition from shelling to detail fracture , 1992 .

[4]  P. J. Webster,et al.  Residual stress changes in railway rails , 1992 .

[5]  Jonas W. Ringsberg,et al.  Fatigue crack growth in a welded rail under the influence of residual stresses , 2005 .

[6]  G. A. Webster,et al.  Measurement of Residual Stresses In Railway Rails , 1989 .

[7]  S. Suresh.  Fatigue of materials , 1991 .

[8]  R. A. Smith,et al.  Fatigue in Transport: Problems, Solutions and Future Threats , 1998 .

[9]  D Y Jeong.  CORRELATIONS BETWEEN RAIL DEFECT GROWTH DATA AND ENGINEERING ANALYSES, PART I: LABORATORY TESTS , 2003 .

[10]  Jonas W. Ringsberg,et al.  Fatigue evaluation of surface coated railway rails using shakedown theory, finite element calculations, and lab and field trials , 2005 .

[11]  Franz Dieter Fischer,et al.  Residual stresses in new rails , 2000 .

[12]  Jens C. O. Nielsen,et al.  Out-of-round railway wheels—wheel-rail contact forces and track response derived from field tests and numerical simulations , 2003 .

[13]  Stefano Beretta,et al.  Mechanisms of mixed mode fatigue crack propagation at rail butt-welds , 2006 .

[14]  Ulf Olofsson,et al.  Wheel-rail wear simulation , 2004 .

[15]  Roberto Roberti,et al.  The competitive role of wear and RCF in a rail steel , 2005 .

[16]  Anders Bergkvist,et al.  On the crack driving force in elastic-plastic fracture mechanics with application to rolling contact fatigue in rails , 2005 .

[17]  U. P. Singh,et al.  On the origin of pop-in crack extension , 1991 .

[18]  D Y Jeong,et al.  Propagation analysis of transverse defects originating at the lower gage corner of rail , 1998 .

[19]  Jonas W. Ringsberg,et al.  Shear mode growth of short surface-breaking RCF cracks , 2005 .

[20]  Simon Iwnicki,et al.  Handbook of railway vehicle dynamics , 2006 .

[21]  Jonas W. Ringsberg.  Rolling Contact Fatigue of Railway Rails with Emphasis on Crack Initiation , 2000 .

[22]  Karl-Otto Edel,et al.  Bewertung der Rissausbreitung an Federstellen in Zungenschienen , 2004 .

[23]  G. C. Sih,et al.  Effect of load sequence on fatigue life of rail steel , 1992 .

[24]  Michele Carboni,et al.  Mode II fatigue failures at rail butt-welds , 2005 .

[25]  M. W. Brown,et al.  Modelling the three-dimensional behaviour of shallow rolling contact fatigue cracks in rails , 2002 .

[26]  S. J. Wineman,et al.  Rail web fracture in the presence of residual stresses , 1987 .

[27]  David Y. Jeong,et al.  Damage tolerance analysis of detail fractures in rail , 1997 .

[28]  Jonas W. Ringsberg,et al.  Rolling contact fatigue analysis of rails inculding numerical simulations of the rail manufacturing process and repeated wheel-rail contact loads , 2003 .

[29]  B. L. Josefson,et al.  Finite element analyses of rolling contact fatigue crack initiation in railheads , 2001 .

[30]  G. Glinka,et al.  An examination of mixed fatigue-tensile surface crack growth in rails , 1984 .

[31]  Makoto Akama.  Fatigue Crack Growth under Mixed Loading of Tensile and In-plane Shear Modes , 2003 .

[32]  Magnus Ekh,et al.  Parameter identification and modeling of large ratcheting strains in carbon steel , 2006 .

[33]  Chul-Su Kim,et al.  Fatigue crack growth behavior of rail steel under mode I and mixed mode loadings , 2002 .

[34]  Ra Mayville,et al.  Numerical analysis of a railroad bolt hole fracture problem , 1995 .

[35]  Kunihiro Kondo,et al.  Cause, increase, diagnosis, countermeasures and elimination of Shinkansen shelling , 1996 .

[36]  Jonas W. Ringsberg,et al.  Fatigue life and crack closure in specimens subjected to variable amplitude loads under plane strain conditions , 2000 .

[37]  Ulf Olofsson,et al.  Contact mechanics analysis of measured wheel-rail profiles using the finite element method , 2001 .

[38]  T. M. Holden,et al.  Residual stresses in alumino-thermic welded rails , 1997 .

[39]  Hiroyuki Sugiyama,et al.  Railroad Vehicle Dynamics: A Computational Approach , 2007 .

[40]  Jens C. O. Nielsen,et al.  Assessment of methods for calculating contact pressure in wheel–rail/switch contact , 2006 .

[41]  Ajay Kapoor,et al.  Rail rolling contact fatigue dependence on friction, predicted using fracture mechanics with a three-dimensional boundary element model , 2009 .

[42]  Franz Dieter Fischer,et al.  Residual stress formation during the roller straightening of railway rails , 2001 .

[43]  M. W. Brown,et al.  A branch criterion for shallow angled rolling contact fatigue cracks in rails , 1996 .

[44]  Jens C. O. Nielsen,et al.  Simulation of dynamic train–track interaction with state-dependent track properties , 2004 .

[45]  Oscar Orringer,et al.  Field experience and test results , 1992 .

[46]  S. L Srimani,et al.  An investigation for control of residual stress in roller-straightened rails , 2003 .

[47]  Janusz Orkisz,et al.  Residual Stress in Rails , 1992 .

[48]  J. J. Kalker,et al.  Wheel-rail rolling contact theory , 1991 .

[49]  F. Franklin,et al.  Predicting the life of steel rails , 2007 .

[50]  A. Olver.  The Mechanism of Rolling Contact Fatigue: An Update , 2005 .

[51]  J. L. Tevaarwerk,et al.  Subsurface stress evaluations under rolling/sliding contacts , 1984 .

[52]  Wing Kong Chiu,et al.  Experimental and numerical investigations: Alleviating tensile residual stresses in flash-butt welds by localised rapid post-weld heat treatment , 2008 .

[53]  Reinhard Pippan,et al.  Some comments on surface cracks in rails , 2006 .

[54]  D. Broek.  The practical use of fracture mechanics , 1988 .

[55]  Ajay Kapoor,et al.  The current status of theory and practice on rail integrity in Japanese railways—rolling contact fatigue and corrugations , 2003 .

[56]  K. Dang Van,et al.  Rolling contact in railways: modelling, simulation and damage prediction , 2003 .

[57]  S. Bogdański,et al.  3D model of liquid entrapment mechanism for rolling contact fatigue cracks in rails , 2008 .

[58]  Francis Franklin,et al.  Modelling wear and crack initiation in rails , 2007 .

[59]  Jonas W. Ringsberg,et al.  Rolling contact fatigue of rails—finite element modelling of residual stresses, strains and crack initiation , 2000 .

[60]  David Y. Jeong,et al.  CRACK PROPAGATION LIFE OF DETAIL FRACTURES IN RAILS. FINAL REPORT , 1988 .

[61]  Uwe Zerbst,et al.  Damage tolerance investigations on rails , 2009 .

[62]  Horst-Hannes Cerjak,et al.  Mathematical Modelling of Weld Phenomena 7 , 2002 .

[63]  Christian Madshus,et al.  HIGH-SPEED RAILWAY LINES ON SOFT GROUND: DYNAMIC BEHAVIOUR AT CRITICAL TRAIN SPEED , 2000 .

[64]  Arnold Verruijt,et al.  Beams on Elastic Foundation , 1995 .

[65]  J. E. Garnham,et al.  Modelling rail steel microstructure and its effect on crack initiation , 2008 .

[66]  H. Zimmermann,et al.  Die Berechnung des Eisenbahnoberbaues , 1930 .

[67]  Ajay Kapoor,et al.  Modelling and full-scale trials to investigate fluid pressurisation of rolling contact fatigue cracks , 2008 .

[68]  S. L. Grassie,et al.  Rail defects: an overview , 2003 .

[69]  D. Y. Jeong,et al.  Fatigue crack growth of surface cracks in the rail web , 1989 .

[70]  Jonas W. Ringsberg,et al.  Life prediction of rolling contact fatigue crack initiation , 2001 .

[71]  Felix Schmid,et al.  MANAGING THE CRITICAL WHEEL/RAIL INTERFACE , 2002 .

[72]  Anders Ekberg,et al.  A FATIGUE LIFE MODEL FOR GENERAL ROLLING CONTACT WITH APPLICATION TO WHEEL/RAIL DAMAGE , 1995 .

[73]  Sylvie Pommier,et al.  Fatigue crack growth under non-proportional mixed-mode loading in ferritic-pearlitic steel , 2004 .

[74]  David Y. Jeong.  Application of effective stress intensity factor crack closure model to evaluate train load sequence effects on crack growth rates , 1995 .

[75]  S. J. Wineman,et al.  Residual stresses near a rail end , 1990 .

[76]  Jonas W. Ringsberg,et al.  On propagation of short rolling contact fatigue cracks , 2003 .

[77]  Anders Skyttebol,et al.  Continuous Welded Railway Rails: Residual Stress Analyses, Fatigue Assessments and Experiments , 2004 .

[78]  M. C. Dubourg,et al.  A Predictive Rolling Contact Fatigue Crack Growth Model: Onset of Branching, Direction, and Growth—Role of Dry and Lubricated Conditions on Crack Patterns , 2002 .

[79]  M. N. Bassim,et al.  Dependence of the fatigue limit of rail steels on stress intensity factor near inclusions , 1995 .

[80]  R A Mayville,et al.  Development and application of rail defect fracture models to assess remedial actions , 1993 .

[81]  Karl-Otto Edel,et al.  Spannungsintensitätsfaktoren für Risse in Schienen , 2005 .

[82]  S. Timoshenko,et al.  Theory of elasticity , 1975 .

[83]  O. Orringer,et al.  Detail fracture growth in rails: Test results , 1986 .

[84]  F. Franklin,et al.  Surface roughness and plastic flow in rail wheel contact , 2002 .

[85]  Huseyin Sehitoglu,et al.  Analysis of surface crack growth under rolling contact fatigue , 2008 .