Nano-Scale Mechanical Responses of Sn-Ag Based Lead-free Solders

The mechanical properties of the Sn-3.5Ag lead-free solder alloys were characterized in different size scales by nanoindentation technology. Some of the principle mechanical properties, such as Mayer's hardness, reduced Young's modulus and the strain rate sensitivity index were assessed. In particular, the strain rate sensitivity index is extracted from the creep deformation of the solder alloys at the dwell time of target load based on the Miyo-Nix method. It was found that the mechanical properties of the Sn-3.5Ag solder alloy were indeed size dependent. That is, the micro-scale BGA balls showed different mechanical properties from the conventional bulk specimens. According to the strain gradient theory, the non-homogeneous microstructure of the Sn-3.5Ag alloy may be responsible for the creep deformation variation of the micro-scale BGA solder balls. In addition, the influence of aging on the mechanical properties was also discussed.

[1]  M. Ashby,et al.  Strain gradient plasticity: Theory and experiment , 1994 .

[2]  Eero Ristolainen,et al.  Mechanical and microstructural properties of SnAgCu solder joints , 2006 .

[3]  Nikhilesh Chawla,et al.  Deformation behavior of (Cu, Ag)–Sn intermetallics by nanoindentation , 2004 .

[4]  I. Manika,et al.  Size effects in micro- and nanoscale indentation , 2006 .

[5]  T. Bieler,et al.  The orientation imaging microscopy of lead-free Sn-Ag solder joints , 2005 .

[6]  M. Mayo,et al.  Nanoindentation of nanocrystalline ZnO , 1992 .

[7]  T. Takemoto,et al.  The evolution of plastic deformation of Sn3.5Ag-based lead-free solders , 2006, 56th Electronic Components and Technology Conference 2006.

[8]  G. Pharr,et al.  An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments , 1992 .

[9]  Xiaodong Li,et al.  Sample size effect on nanoindentation of micro-/nanostructures , 2006 .

[10]  Norman A. Fleck,et al.  A reformulation of strain gradient plasticity , 2001 .

[11]  William D. Nix,et al.  A micro-indentation study of superplasticity in Pb, Sn, and Sn-38 wt% Pb , 1988 .

[12]  Huajian Gao,et al.  Indentation size effects in crystalline materials: A law for strain gradient plasticity , 1998 .

[13]  C. Basaran,et al.  Nanoindentation of Pb/Sn solder alloys; experimental and finite element simulation results , 2006 .

[14]  Tomi Laurila,et al.  Interfacial reactions between lead-free solders and common base materials , 2005 .

[15]  N.,et al.  A PHENOMENOLOGICAL THEORY FOR STRAIN GRADIENT EFFECTS IN PLASTICITY , 2002 .

[16]  Luhua Xu,et al.  Effect of intermetallic and Kirkendall voids growth on board level drop reliability for SnAgCu lead-free BGA solder joint , 2006, 56th Electronic Components and Technology Conference 2006.

[17]  Yi Li,et al.  Recent advances of conductive adhesives as a lead-free alternative in electronic packaging: Materials, processing, reliability and applications , 2006 .