An Examination of Carbonaceous Deposits in Direct-Utilization SOFC Anodes

The deposition, stability, and function of carbonaceous films formed by exposing porous yttria-stabilized zirconia (YSZ) anodes in YSZ-based solid oxide fuel cells (SOFCs) to n-butane at elevated temperatures was studied using a combination of four-probe conductivity, impedance spectroscopy, and cell polarization measurements. The carbonaceous deposits were found to have high electronic conductivity and to be relatively stable for steam-to-carbon ratios as high as 3.75. Comparison of the performance of cells in which carbon films were used as the sole current collector in the anode with anodes containing both Cu and carbon films indicated that in the latter case, the carbon layer plays an important role in providing electronic conductivity near the three-phase boundary.

[1]  W. L. Worrell,et al.  A Novel Method for Preparing Anode Cermets for Solid Oxide Fuel Cells , 1999 .

[2]  Raymond J. Gorte,et al.  Tape Cast Solid-Oxide Fuel Cells for the Direct Oxidation of Hydrocarbons , 2001 .

[3]  W. L. Worrell,et al.  A Comparison of Cu-Ceria-SDC and Au-Ceria-SDC Composites for SOFC Anodes , 2003 .

[4]  J. Vohs,et al.  Impedance Spectroscopy for the Characterization of Cu-Ceria-YSZ Anodes for SOFCs , 2003 .

[5]  Raymond J. Gorte,et al.  Direct oxidation of hydrocarbons in a solid-oxide fuel cell , 2000, Nature.

[6]  J. Vohs,et al.  Role of Hydrocarbon Deposits in the Enhanced Performance of Direct-Oxidation SOFCs , 2003 .

[7]  R. Gorte,et al.  Steam reforming of n-butane on Pd/ceria , 2001 .

[8]  C. H. Bartholomew.  Carbon Deposition in Steam Reforming and Methanation , 1982 .

[9]  J. Vohs,et al.  Synthesis of Highly Porous Yttria‐Stabilized Zirconia by Tape‐Casting Methods , 2003 .

[10]  Ryuji Kikuchi,et al.  Study on steam reforming of CH4 and C2 hydrocarbons and carbon deposition on Ni-YSZ cermets , 2002 .

[11]  K. P. Jong,et al.  Impact of the structure and reactivity of nickel particles on the catalytic growth of carbon nanofibers , 2002 .

[12]  M. Mogensen,et al.  Preparation and Characterization of Copper/Yttria Titania Zirconia Cermets for Use as Possible Solid Oxide Fuel Cell Anodes , 2001 .

[13]  K. Sasaki,et al.  Equilibria in Fuel Cell Gases I. Equilibrium Compositions and Reforming Conditions , 2003 .

[14]  D. Dees,et al.  Conductivity of porous Ni/ZrO/sub 2/-Y/sub 2/O/sub 3/ cermets , 1987 .

[15]  Raymond J. Gorte,et al.  Direct Oxidation of Liquid Fuels in a Solid Oxide Fuel Cell , 2001 .

[16]  Raymond J. Gorte,et al.  Anodes for Direct Oxidation of Dry Hydrocarbons in a Solid‐Oxide Fuel Cell , 2000 .

[17]  J. Vohs,et al.  An Examination of Lanthanide Additives on the Performance of Cu-YSZ Cermet Anodes , 2002 .

[18]  R. Mark Ormerod.  Solid oxide fuel cells , 2003 .

[19]  N. Minh.  Ceramic Fuel Cells , 1993 .

[20]  J. Vohs,et al.  Effect of Synthesis Conditions on the Performance of Cu ­ CeO2 ­ YSZ Anodes in SOFCs , 2003 .

[21]  J. Vohs,et al.  A Study of Direct-Conversion SOFC with n-Butane at Higher Fuel Utilization , 2003 .

[22]  John T. S. Irvine,et al.  Improved Oxidation of Hydrocarbons with New Electrodes in High Temperature Fuel Cells , 2001 .