Effects of water molecules on tribological behavior and property measurements in nano-indentation processes - a numerical analysis

Nano/micro-manufacturing under wet condition is an important consideration for various tool-based processes such as indentation, scratching, and machining. The existence of liquids adds complexity to the system, changes the tool/work interfacial condition, and affects material behaviors. For indentation, it may also affect material property measurements. However, little effort has been made to study this challenging issue at nano- or atomistic scale. In this study, we tackle this challenge by investigating nano-indentation processes submerged in water using the molecular dynamics (MD) simulation approach. Compared with dry indentation in which no water molecules are present, the existence of water molecules causes the increase of indentation force in initial penetration, but the decrease of indentation force in full penetration. It also reduces the sticking phenomenon between the work and tool atoms during indenter retraction, such that the indentation geometry can be better retained. Meanwhile, nano-indentation under wet condition exhibits the indentation size effect, while dry nano-indentation exhibits the reverse indentation size effect. The existence of water leads to higher computed hardness values at low indentation loads and a smaller value of Young's modulus. In addition, the friction along the tool/work interface is significantly reduced under wet indentation.

[1]  J. Vlassak,et al.  Determination of indenter tip geometry and indentation contact area for depth-sensing indentation experiments , 1998 .

[2]  Jee-Gong Chang,et al.  Molecular dynamics analysis of temperature effects on nanoindentation measurement , 2003 .

[3]  M. Baskes,et al.  Embedded-atom method: Derivation and application to impurities, surfaces, and other defects in metals , 1984 .

[4]  D. Farkas,et al.  Interaction of lattice dislocations with a grain boundary during nanoindentation simulation , 2007 .

[5]  J. Guille,et al.  Microindentation studies on BaFCl single crystals , 1991, Journal of Materials Science.

[6]  R. I. Davidson,et al.  On the application of the work-of-indentation approach to depth-sensing indentation experiments in coated systems , 2001 .

[7]  Linqing Zheng,et al.  Computer experiments on nano-indentation: A molecular dynamics approach to the elasto-plastic contact of metal copper , 2000 .

[8]  Keshra Sangwal,et al.  On the reverse indentation size effect and microhardness measurement of solids , 2000 .

[9]  G. Pharr,et al.  An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments , 1992 .

[10]  Jing Shi,et al.  Comparing Atomistic Machining of Monocrystalline and Polycrystalline Copper Structures , 2011 .

[11]  M. Laugier,et al.  Work of indentation methods for determining copper film hardness , 2005 .

[12]  Yingxue Yao,et al.  Single crystal bulk material micro/nano indentation hardness testing by nanoindentation instrument and AFM , 2007 .

[13]  Yu. A. Burenkov,et al.  Softening of the elastic modulus in submicrocrystalline copper , 1995 .

[14]  N. Moody,et al.  The role of dislocation walls for nanoindentation to shallow depths , 2009 .

[15]  Janet E. Jones On the determination of molecular fields. —II. From the equation of state of a gas , 1924 .

[16]  Te-Hua Fang,et al.  Nanomechanical properties of copper thin films on different substrates using the nanoindentation technique , 2003 .

[17]  P. Morse Diatomic Molecules According to the Wave Mechanics. II. Vibrational Levels , 1929 .

[18]  Bharat Bhushan,et al.  NANOINDENTATION HARDNESS MEASUREMENTS USING ATOMIC FORCE MICROSCOPY , 1994 .

[19]  R. M. Hooper,et al.  Indentation-size effects in single-crystal MgO , 2002 .

[20]  A. Serra,et al.  Study of copper precipitates in α‐iron by computer simulation I. Interatomic potentials and properties of Fe and Cu , 1995 .

[21]  B. Shen,et al.  Molecular dynamics investigation on the atomic-scale indentation and friction behaviors between diamond tips and copper substrate , 2010 .

[22]  Simon R. Phillpot,et al.  Dislocation processes in the deformation of nanocrystalline aluminium by molecular-dynamics simulation , 2002, Nature materials.

[23]  R. C. Bradt,et al.  The frictional component of the indentation size effect in low load microhardness testing , 1993 .

[24]  J. Weertman,et al.  Temperature dependence of hardness of nanocrystalleve copper in low-temperature range , 1997 .

[25]  A. Nakano,et al.  A molecular dynamics study of nanoindentation of amorphous silicon carbide , 2007 .

[26]  H. V. Swygenhoven,et al.  Atomistic simulations of spherical indentations in nanocrystalline gold , 2003 .

[27]  Horst Hahn,et al.  The interaction mechanism of screw dislocations with coherent twin boundaries in different face-centred cubic metals , 2006 .

[28]  Zhenyu Xue,et al.  The Influence of Indenter Tip Radius on the Micro-Indentation Hardness , 2002 .

[29]  H. Pollock,et al.  Limits to the hardness testing of films thinner than 1 μm , 1987 .

[30]  Hu Huang,et al.  The evolution of machining-induced surface of single-crystal FCC copper via nanoindentation , 2013, Nanoscale Research Letters.

[31]  Hiroaki Tanaka,et al.  Minimum thickness of cut in micromachining , 1992 .

[32]  N. Moody,et al.  Substrate effects on indentation plastic zone development in thin soft films , 2001 .

[33]  H. Shi,et al.  Friction effect in low load hardness testing of iron , 1989 .

[34]  T. Shi,et al.  Molecular dynamic simulations of nanoindentation in aluminum thin film on silicon substrate , 2010 .

[35]  T. O'sullivan,et al.  Mechanical Properties of Thin Films , 1990 .

[36]  J. Gurland,et al.  Science of Hard Materials , 1983 .

[37]  Alexei Bolshakov,et al.  A critical examination of the fundamental relations used in the analysis of nanoindentation data , 1999 .

[38]  D. Clarke,et al.  Size dependent hardness of silver single crystals , 1995 .

[39]  C. Brooks Computer simulation of liquids , 1989 .

[40]  M. Laugier,et al.  A nanoindentation study of copper films on oxidised silicon substrates , 2003 .

[41]  J. Georges,et al.  Vickers Indentation Curves of Magnesium Oxide (MgO) , 1984 .