Multifunctional properties of 3D printed poly(lactic acid)/graphene nanocomposites by fused deposition modeling

ABSTRACT In this work, three-dimensional (3D) printing system based on fused deposition modeling (FDM) is used for the fabrication of conductive polymer nanocomposites. This technology consists in the additive multilayer deposition of polymeric nanocomposite based on poly(lactic acid) (PLA) and graphene by means of a in house made low-cost commercial bench-top 3D printer. Further, 3D printed PLA/graphene nanocomposites containing 10 wt% graphene in PLA matrix were characterized for their mechanical, electrical and electromagnetic induction shielding properties of the nanocomposite. Furthermore X-ray computed micro-tomography analyses showed that printed samples have good dimensional accuracy and are significantly closer to the predefined design and the results of scanning electron microscopy (SEM) printed samples showed a uniform dispersion of graphene in PLA matrix The proposed material has uniquely advantageous when implemented in 3D printed structures, because incorporation of multifunctional graphene has been shown to substantially improve the properties of the resulting nanocomposite.

[1]  R. Wicker,et al.  Mechanical, Electromagnetic, and X-ray Shielding Characterization of a 3D Printable Tungsten–Polycarbonate Polymer Matrix Composite for Space-Based Applications , 2015, Journal of Electronic Materials.

[2]  R. Lawrence,et al.  Conductive Carbon Nanofiber–Polymer Foam Structures , 2005 .

[3]  T. K. Kundra,et al.  Additive Manufacturing Technologies , 2018 .

[4]  L. Love,et al.  Highly oriented carbon fiber–polymer composites via additive manufacturing , 2014 .

[5]  Paulo J. Tavares,et al.  Comparative Failure Analysis of PLA, PLA/GNP and PLA/CNT-COOH Biodegradable Nanocomposites thin Films☆ , 2015 .

[6]  Ryan B. Wicker,et al.  3D Printing multifunctionality: structures with electronics , 2014 .

[7]  Petra Pötschke,et al.  Dielectric spectroscopy on melt processed polycarbonate—multiwalled carbon nanotube composites , 2003 .

[8]  L. Murr,et al.  Next-generation biomedical implants using additive manufacturing of complex, cellular and functional mesh arrays , 2010, Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences.

[9]  R. Shanks,et al.  Structural, mechanical and dielectric properties of poly(ethylene-co-methyl acrylate-co-acrylic acid) graphite oxide nanocomposites , 2005 .

[10]  Xingyi Huang,et al.  Influence of aspect ratio of carbon nanotubes on crystalline phases and dielectric properties of poly(vinylidene fluoride) , 2009 .

[11]  David A. Hutchins,et al.  A Simple, Low-Cost Conductive Composite Material for 3D Printing of Electronic Sensors , 2012, PloS one.

[12]  David W. Rosen,et al.  Additive Manufacturing Technologies: Rapid Prototyping to Direct Digital Manufacturing , 2009 .

[13]  D. Espalin,et al.  Encapsulated Copper Wire and Copper Mesh Capacitive Sensing for 3-D Printing Applications , 2015, IEEE Sensors Journal.

[14]  V. Sankaranarayanan,et al.  Functionalized Graphene–PVDF Foam Composites for EMI Shielding† , 2011 .

[15]  Ryan B. Wicker,et al.  Novel ABS-based binary and ternary polymer blends for material extrusion 3D printing , 2014 .

[16]  Kalappa Prashantha,et al.  Poly(lactic acid)/halloysite nanotubes nanocomposites: Structure, thermal, and mechanical properties as a function of halloysite treatment , 2012 .

[17]  I. Zein,et al.  Fused deposition modeling of novel scaffold architectures for tissue engineering applications. , 2002, Biomaterials.