Microstructures of surface white layer and internal white adiabatic shear band

Abstract After being impacted in an impact wear tester simulating the conditions in a mill, the surface white layer and internal white adiabatic shear band were observed in a low alloy steel (0.40% C0.85% Cr1.55% Ni0.20% Mo). It was found that cracks can easily nucleate and propagate in the surface white layer and internally formed adiabatic shear band during impact wear processes. Surface white layers with different hardness values possess very fine subgrains of various sizes, as do the internal white adiabatic shear bands. It was supposed that dynamic recovery may occur in the surface white layer and internal white adiabatic shear band in impact wear.

[1]  A. A. Torrance,et al.  The metallography of worn surfaces and some theories of wear , 1978 .

[2]  B. J. Griffiths,et al.  Mechanisms of White Layer Generation With Reference to Machining and Deformation Processes , 1987 .

[3]  I. Sare.  Repeated impact-abrasion of ore-crushing hammers , 1983 .

[4]  A. K. Gangopadhyay,et al.  Effect of impact on the grinding media and mill liner in a large semiautogenous mill , 1987 .

[5]  S. Timothy,et al.  The structure of adiabatic shear bands in metals: A critical review☆ , 1987 .

[6]  L. Meyer,et al.  Adiabatic shear failure under biaxial dynamic compression/ shear loading , 1994 .

[7]  Morris Azrin,et al.  Microvoid formation during shear deformation of ultrahigh strength steels , 1989 .

[8]  B. J. Griffiths,et al.  White Layer Formations at Machined Surfaces and Their Relationship to White Layer Formations at Worn Surfaces , 1985 .

[9]  Z. G. Wang,et al.  FORMATION AND MICROSTRUCTURE OF LOCALIZED SHEAR BAND IN A LOW-CARBON STEEL , 1990 .

[10]  M. Meyers,et al.  Formation of Controlled Adiabatic Shear Bands in AISI 4340 High Strength Steel , 1990 .

[11]  Yilong Bai,et al.  Adiabatic shear banding , 1990 .

[12]  Y. Prasad,et al.  Flow Instabilities and fracture in Ti-6Al-4V deformed in compression at 298 K to 673 K , 1994 .

[13]  S. Nutt,et al.  Adiabatic shear band formation during dynamic torsional deformation of an HY-100 steel , 1993 .

[14]  Marc A. Meyers,et al.  DYNAMIC RECRYSTALLIZATION IN HIGH-STRAIN, HIGH-STRAIN-RATE PLASTIC DEFORMATION OF COPPER , 1994 .

[15]  A. I. Smith,et al.  Materials and metallurgical aspects of piston ring scuffing — A literature survey , 1975 .

[16]  M. Meyers,et al.  Observation of an adiabatic shear band in titanium by high-voltage transmission electron microscopy , 1986 .

[17]  W. Shen,et al.  A study on the behavior of adiabatic shear bands in impact wear , 1996 .

[18]  U. S. Lindholm,et al.  Shock Wave and High-Strain-Rate Phenomena in Materials , 1992 .

[19]  I. Hutchings,et al.  The structure of adiabatic shear bands in a titanium alloy , 1985 .

[20]  R. Arone,et al.  The microstructural changes in the surface layer of gun barrels , 1991 .

[21]  Marc A. Meyers,et al.  Evolution of microstructure and shear-band formation in α-hcp titanium , 1994 .

[22]  W. Stobbs,et al.  A transmission electron microscopy study of the white-etching layer on a rail head , 1984 .

[23]  Marc A. Meyers,et al.  Observation of an adiabatic shear band in AISI 4340 steel by high-voltage transmission electron microscopy , 1990 .

[24]  H. Rogers.  Adiabatic Plastic Deformation , 1979 .