Utilization of machining chips waste for production functionally of gradient magnesium matrix composites

[1]  M. H. Ahmed,et al.  Past and present of functionally graded coatings: Advancements and future challenges , 2022, Applied Materials Today.

[2]  Yasuhisa Nishimura,et al.  Influence of Al particles as infiltration promoters on the interfacial reaction and mechanical property of a continuous SiC fiber/AZ91 composite fabricated by a low-pressure infiltration method , 2021 .

[3]  D. Giuranno,et al.  Enhancement of wettability in AZ91/B4C system by a mechanical purification of liquid alloy , 2021, Journal of Magnesium and Alloys.

[4]  P. Dudek,et al.  Microstructure of castings made of magnesium alloys based on recycling of the circulating scrap , 2021 .

[5]  N. Radhika,et al.  Influence of carbide ceramic reinforcements in improving tribological properties of A333 graded hybrid composites , 2021 .

[6]  Song-Jeng Huang,et al.  Effect of hybrid reinforcement on microstructure and mechanical properties of AZ61 magnesium alloy processed by stir casting method , 2021, Composites Communications.

[7]  Vasavi Boggarapu,et al.  State of the art in functionally graded materials , 2021 .

[8]  Seyed Saeid Rahimian Koloor,et al.  Role B4C Addition on Microstructure, Mechanical, and Wear Characteristics of Al-20%Mg2Si Hybrid Metal Matrix Composite , 2021 .

[9]  A. Ma,et al.  Influence of gradient structure on wear characteristics of centrifugally cast functionally graded magnesium matrix composites for automotive applications , 2021, Archives of Civil and Mechanical Engineering.

[10]  M. Chopkar,et al.  A review on fabrication and characteristics of functionally graded aluminum matrix composites fabricated by centrifugal casting method , 2021, SN Applied Sciences.

[11]  Dinbandhu,et al.  Recent trends in non-traditional machining of shape memory alloys (SMAs): A review , 2021 .

[12]  Zhe Wang,et al.  Novel and efficient purification of scrap Al-Mg alloys using supergravity technology. , 2020, Waste management.

[13]  A. Esguerra-Arce,et al.  The evolution of the microstructure and properties of ageable Al-Si-Zn-Mg alloy during the recycling of milling chips through powder metallurgy , 2020 .

[14]  A. Ma,et al.  Investigation on mechanical properties and wear performance of functionally graded AZ91-SiCp composites via centrifugal casting , 2020 .

[15]  Ji-cai Feng,et al.  Influence of composition gradient variation on the microstructure and mechanical properties of 316 L/Inconel718 functionally graded material fabricated by laser additive manufacturing , 2020 .

[16]  D. Song,et al.  30 Years of functionally graded materials: An overview of manufacturing methods, Applications and Future Challenges , 2020 .

[17]  Yangqiu Wang,et al.  Microstructure and mechanical properties of ultra-lightweight Mg-Li-Al/Al-Li composite produced by accumulative roll bonding at ambient temperature , 2020 .

[18]  Xiaojun Wang,et al.  Effect of Necklace-Type Distribution of SiC Particles on Dry Sliding Wear Behavior of As-Cast AZ91D/SiCp Composites , 2020 .

[19]  Song-Jeng Huang,et al.  Effects of tungsten disulfide on microstructure and mechanical properties of AZ91 magnesium alloy manufactured by stir casting , 2020 .

[20]  H. Patle,et al.  Sliding wear behavior of AZ91/B4C surface composites produced by friction stir processing , 2020, Materials Research Express.

[21]  M. Emamy,et al.  The statistical analysis of tensile and compression properties of the as-cast AZ91-X%B4C composites , 2019, International Journal of Metalcasting.

[22]  Mahmoud H. Ahmed,et al.  Functionally graded materials classifications and development trends from industrial point of view , 2019, SN Applied Sciences.

[23]  A. Asgari,et al.  Magnesium alloy-silicon carbide composite fabrication using chips waste , 2019, Journal of Cleaner Production.

[24]  Bingqing Chen,et al.  Additive manufacturing of functionally graded materials: A review , 2019, Materials Science and Engineering: A.

[25]  R. Bendikiene,et al.  Circular economy practice: From industrial metal waste to production of high wear resistant coatings , 2019, Journal of Cleaner Production.

[26]  D. Thakur,et al.  Effect of particle size and volume fraction on the strengthening mechanisms of boron carbide reinforced aluminum metal matrix composites , 2019 .

[27]  J. Han,et al.  The Comparison in the Microstructure and Mechanical Properties between AZ91 Alloy and Nano-SiCp/AZ91 Composite Processed by Multi-Pass Forging Under Varying Passes and Temperatures , 2019, Materials.

[28]  B. C. Pai,et al.  Studies on Tribological Characteristics of Centrifugally Cast SiCp-Reinforced Functionally Graded A319 Aluminium Matrix Composites , 2018, Transactions of the Indian Institute of Metals.

[29]  N. Radhika,et al.  Fabrication of LM 25/WC functionally graded composite for automotive applications and investigation of its mechanical and wear properties , 2018 .

[30]  Yong Liu,et al.  Interfacial design and strengthening mechanisms of AZ91 alloy reinforced with in-situ reduced graphene oxide , 2018 .

[31]  Huihui Yu,et al.  Hall-Petch relationship in Mg alloys: A review , 2017 .

[32]  Feliciane Andrade Brehm,et al.  Recycling of contaminated metallic chip based on eco-efficiency and eco-effectiveness approaches , 2017 .

[33]  T. Prabhu.  Processing and properties evaluation of functionally continuous graded 7075 Al alloy/SiC composites , 2017 .

[34]  Fabrizio Micari,et al.  AZ31 magnesium alloy recycling through friction stir extrusion process , 2016 .

[35]  H. Nie,et al.  Effect of pre-homogenizing treatment on microstructure and mechanical properties of hot-rolled AZ91 magnesium alloys , 2016 .

[36]  A. Rashid,et al.  Towards circular economy implementation: a comprehensive review in context of manufacturing industry , 2016 .

[37]  N. Selvakumar,et al.  Effect of nano/micro B4C particles on the mechanical properties of aluminium metal matrix composites fabricated by ultrasonic cavitation-assisted solidification process , 2016 .

[38]  Xiaolong Ma,et al.  Processing and properties of magnesium containing a dense uniform dispersion of nanoparticles , 2015, Nature.

[39]  Yoshimi Watanabe,et al.  Distribution of microstructure and cooling rate in Al–Al2Cu functionally graded materials fabricated by a centrifugal method , 2015 .

[40]  B. C. Pai,et al.  Investigation on mechanical properties and creep behavior of stir cast AZ91-SiCp composites , 2015 .

[41]  F. Czerwinski.  The reactive element effect on high-temperature oxidation of magnesium , 2015 .

[42]  C. Oldani,et al.  Refining of AZ91 Magnesium Alloy Obtained in Machining Chips Recycling , 2015 .

[43]  R. Kayikci,et al.  Production of functionally graded SiC/Al-Cu-Mg composite by centrifugal casting , 2016 .

[44]  S. Pişkin,et al.  Characterization and modification of waste magnesium chip utilized as an Mg-rich intermetallic composite , 2014 .

[45]  T. P. D. Rajan,et al.  Developments in Processing of Functionally Gradient Metals and Metal–Ceramic Composites: A Review , 2014, Acta Metallurgica Sinica (English Letters).

[46]  B. C. Pai,et al.  Physical, Mechanical, and Tribological Attributes of Stir-Cast AZ91/SiCp Composite , 2014, Acta Metallurgica Sinica (English Letters).

[47]  H. Friedrich,et al.  Life-Cycle Assessment of the Recycling of Magnesium Vehicle Components , 2013 .

[48]  Christopher T. Wright,et al.  Optimizing hammer mill performance through screen selection and hammer design , 2013 .

[49]  Xiaojun Wang,et al.  Microstructure and strengthening mechanism of bimodal size particle reinforced magnesium matrix composite , 2012 .

[50]  Chengwei Wu,et al.  Tensile mechanical properties and strengthening mechanism of hybrid carbon nanotube and silicon carbide nanoparticle-reinforced magnesium alloy composites , 2012 .

[51]  R. M. Pillai,et al.  Characterization of centrifugal cast functionally graded aluminum-silicon carbide metal matrix composites , 2010 .

[52]  K. Iždinský,et al.  POSSIBILITIES OF MAGNESIUM RECYCLING , 2008 .

[53]  P. De,et al.  Processing and mechanical properties of SiC reinforced cast magnesium matrix composites by stir casting process , 2007 .

[54]  H. Miura,et al.  Functionally Graded Material Fabricated by a Centrifugal Method from ZK60A Magnesium Alloy , 2005 .

[55]  Ž. Kamberović.  POSSIBILITIES OF RECYCLING OF MAGNESIUM AND MAGNESIUM ALLOYS , 2004 .

[56]  R. Rodríguez-Castro,et al.  Processing and microstructural characterization of functionally gradient Al A359/SiCp composite , 2002 .

[57]  D. Dunand,et al.  Microstructure and mechanical properties of magnesium containing high volume fractions of yttria dispersoids , 2000 .

[58]  Yuansheng Yang,et al.  Theoretical analysis of the particle gradient distribution in centrifugal field during solidification , 1996 .

[59]  M. F. Culpin.  The Viscosity of Liquid Magnesium and Liquid Calcium , 1957 .