On a New Type of Inverter-Induced Bearing Current in Large Drives With One Journal Bearing

We report on a new type of inverter-induced bearing current (BC) that can occur with large inverter-based drive systems with one journal bearing. This current is a variation of the ¿high-frequency circulating¿ BC type that has been described by different authors over the last years. As with the first, the BC mirrors the common-mode (CM) current as a result of inductive coupling. However, the voltage across the bearing also mirrors the stator winding CM voltage and is not reduced to zero by the current flow. We show experimental results of measured currents and give physical explanations from which we then derive an effective mitigation technique, which is also illustrated through measurement results.

[1]  H. Akagi,et al.  Modeling and damping of high-frequency leakage currents in PWM inverter-fed AC motor drive systems , 1995, IAS '95. Conference Record of the 1995 IEEE Industry Applications Conference Thirtieth IAS Annual Meeting.

[2]  Jorma Luomi,et al.  Circumferential Flux as a Source of Bearing Current of Converter-fed AC Machines , 2002 .

[3]  Doyle F. Busse,et al.  Characteristics of shaft voltage and bearing currents , 1997 .

[4]  H. E. Boyanton,et al.  Bearing fluting [motors] , 2002 .

[5]  J. C. Balda,et al.  Minimization and cancellation of common-mode currents, shaft voltages and bearing currents for induction motor drives , 2003, IEEE 34th Annual Conference on Power Electronics Specialist, 2003. PESC '03..

[6]  A. Muetze,et al.  Techniques for Measurement of Parameters Related to Inverter-Induced Bearing Currents , 2007, IEEE Transactions on Industry Applications.

[7]  A. Binder,et al.  Calculation of Motor Capacitances for Prediction of the Voltage Across the Bearings in Machines of Inverter-Based Drive Systems , 2007, IEEE Transactions on Industry Applications.

[8]  Andreas Binder,et al.  BEARING CURRENTS - A DANGER TO INVERTER-FED A-C MOTORS? , 1998 .

[9]  Annette Muetze,et al.  Calculation of Circulating Bearing Currents in Machines of Inverter-Based Drive Systems , 2004, IEEE Transactions on Industrial Electronics.

[10]  P. J. Link,et al.  Minimizing electric bearing currents in ASD systems , 1999 .

[11]  A. Wallace,et al.  An evaluation of mitigation techniques for bearing currents, EMI and over-voltages in ASD applications , 1997, IAS '97. Conference Record of the 1997 IEEE Industry Applications Conference Thirty-Second IAS Annual Meeting.

[12]  W.R. Finley,et al.  Optimal induction motor bearing selection , 2003, Conference Record of the 2003 Annual Pulp and Paper Industry Technical Conference, 2003..

[13]  Doyle F. Busse,et al.  The effects of PWM voltage source inverters on the mechanical performance of rolling bearings , 1997 .

[14]  Annette Muetze,et al.  Practical Rules for Assessment of Inverter-Induced Bearing Currents in Inverter-Fed AC Motors up to 500 kW , 2007, IEEE Transactions on Industrial Electronics.

[15]  A. Binder,et al.  Calculation of influence of insulated bearings and insulated inner bearing seats on circulating bearing currents in machines of inverter-based drive systems , 2006, IEEE Transactions on Industry Applications.

[16]  J. Erdman,et al.  Effect of PWM inverters on AC motor bearing currents and shaft voltages , 1995, Proceedings of 1995 IEEE Applied Power Electronics Conference and Exposition - APEC'95.

[17]  Annette Mütze,et al.  Bearing Currents in Inverter-fed AC-motors , 2004 .

[18]  M.J. Melfi,et al.  Bearing current remediation options , 2004, IEEE Industry Applications Magazine.

[19]  R. Schiferl,et al.  Circuit model for shaft voltage prediction in induction motors fed by PWM-based AC drives , 2003 .

[20]  Doyle F. Busse,et al.  Bearing currents and their relationship to PWM drives , 1997 .

[21]  Thomas A. Lipo,et al.  Modeling of motor bearing currents in PWM inverter drives , 1995 .

[22]  Doyle F. Busse,et al.  System electrical parameters and their effects on bearing currents , 1997 .