Imprint and Fatigue Properties of Chemical Solution Derived Pb_1–-xLa_x(Zr_yTi_1–y)_1–x/4O_3 Thin Films

We have investigated the effect of oxygen vacancies on imprint and fatigue behavior of the PLZT thin films. It is found that the compensation of oxygen vacancies with various dopant concentrations and electrode structures is an important process parameter in determining the tendency to imprint and fatigue. In the case of PLZT thin films, the voltage shifts related to imprint are attributed to the trapping of electrons at ionic defect sites such as oxygen vacancies near the film/electrode interface, the magnitude of polarization, and concentration of defect-dipole complexes involving oxygen vacancies such as V′_Pb–V^••o. The strong dependence of fatigue rate on electrode material for PLZT thin films is due to the effect of the ferroelectric/electrode interaction on the pinning and/or unpinning rate involving the accumulation of oxygen vacancies near the film/electrode interface during fatigue cycling. By using RuO_2 as the top and/or bottom electrode instead of Pt, improved fatigue properties are obtained compared to Pt/PLZT/Pt capacitors. This is because a reduced accumulation of oxygen vacancies near the interface by the oxide electrode such as RuO_2 may reduce the electronic charge trapping and, consequently, lead to less domain wall pinning.

[1]  Seung-Hyun Kim,et al.  Preparation of Pb(Zr_0.52Ti_0.48)O_3 thin films on Pt/RuO_2 double electrode by a new sol-gel route , 1997 .

[2]  D. Dimos,et al.  Voltage offsets and imprint mechanism in SrBi2Ta2O9 thin films , 1996 .

[3]  D. Dimos,et al.  Degradation Mechanisms in Ferroelectric and High-Permittivity Perovskites , 1996 .

[4]  D. Dimos,et al.  Imprint in Ferroelectric Capacitors , 1996 .

[5]  Dennis L. Polla,et al.  Microelectromechanical systems based on ferroelectric thin films , 1995 .

[6]  Joseph T. Evans,et al.  Voltage shifts and imprint in ferroelectric capacitors , 1995 .

[7]  Jun Hee Lee,et al.  Imprint and oxygen deficiency in (Pb,La)(Zr,Ti)O3 thin‐film capacitors with La‐Sr‐Co‐O electrodes , 1995 .

[8]  Michael B. Sinclair,et al.  Sol-gel processing of PZT thin films: A review of the state-of-the-art and process optimization strategies , 1995 .

[9]  Robert O. Warrington,et al.  The miniaturization technologies: past, present, and future , 1994, Proceedings of IECON'94 - 20th Annual Conference of IEEE Industrial Electronics.

[10]  Jhing-Fang Chang,et al.  Effects of dopants in PZT films , 1994 .

[11]  L. E. Cross,et al.  Rapid thermal annealing of sol‐gel derived lead zirconate titanate thin films , 1992 .

[12]  Michael Sayer,et al.  Preparation of Pb(Zr,Ti)O3 thin films by sol gel processing: Electrical, optical, and electro‐optic properties , 1988 .

[13]  Tsuneo Mitsuyu,et al.  Ferroelectric (Pb,La)(Zr,Ti)O3 epitaxial thin films on sapphire grown by rf-planar magnetron sputtering , 1986 .

[14]  R. D. Shannon,et al.  Effective ionic radii in oxides and fluorides , 1969 .

[15]  D. Wouters,et al.  Nucleation and orientation of sol-gel pzt-films on pt electrodes , 1997 .

[16]  P. Lambeck,et al.  Ferroelectric domain stabilization in BaTiO3 by bulk ordering of defects , 1978 .