Electrochemical Characterization of CuSCN Hole-Extracting Thin Films for Perovskite Photovoltaics

CuSCN thin films (optimized previously for perovskite photovoltaics) are deposited on glass, F:SnO2 (FTO), Au, glass-like carbon (GC), and reduced graphene oxide (rGO). They exhibit capacitive charging in an electrochemical window from ca. −0.3 to 0.2 V vs Ag/AgCl. Outside this window, CuSCN film is prone to chemical and structural changes. Anodic breakdown (at ca. 0.5 V) causes restructuring into submicrometer particles and denuding of the substrate. The natural p-doping is demonstrated by both the Hall effect and Mott–Schottky plots from electrochemical impedance. The corresponding flatband potentials (in V vs Ag/AgCl) varied with the substrate type as follows: 0.12 V (CuSCN@FTO), 0.08 V (CuSCN@Au), −0.02 V (CuSCN@GC), and 0.00 V (CuSCN@rGO). The acceptor concentrations determined from electrochemical impedance spectroscopy are by orders of magnitude larger than those from electrical conductivity and the Hall effect, the latter being regarded correct. Raman spectra confirm that thiocyanate is the domina...

[1]  L. Kavan.  Conduction band engineering in semiconducting oxides (TiO2, SnO2): Applications in perovskite photovoltaics and beyond , 2019, Catalysis Today.

[2]  Yuh‐Lang Lee,et al.  Importance of Compact Blocking Layers to the Performance of Dye-Sensitized Solar Cells under Ambient Light Conditions. , 2018, ACS Applied Materials and Interfaces.

[3]  L. Kavan.  Electrochemistry and perovskite photovoltaics , 2018, Current Opinion in Electrochemistry.

[4]  S. Zakeeruddin,et al.  Reduced Graphene Oxide as a Stabilizing Agent in Perovskite Solar Cells , 2018, Advanced Materials Interfaces.

[5]  L. Kavan,et al.  Semi-automatic spray pyrolysis deposition of thin, transparent, titania films as blocking layers for dye-sensitized and perovskite solar cells , 2018, Beilstein journal of nanotechnology.

[6]  Abdullah M. Asiri,et al.  Efficient Planar Perovskite Solar Cells Using Passivated Tin Oxide as an Electron Transport Layer , 2018, Advanced science.

[7]  F. Giordano,et al.  Mesoscopic Oxide Double Layer as Electron Specific Contact for Highly Efficient and UV Stable Perovskite Photovoltaics. , 2018, Nano letters.

[8]  T. Moehl,et al.  Investigation of (Leaky) ALD TiO2 Protection Layers for Water-Splitting Photoelectrodes. , 2017, ACS applied materials & interfaces.

[9]  F. Wang,et al.  In situ decoration of CuSCN nanorod arrays with carbon quantum dots for highly efficient photoelectrochemical performance , 2017 .

[10]  Neha Arora,et al.  Perovskite solar cells with CuSCN hole extraction layers yield stabilized efficiencies greater than 20% , 2017, Science.

[11]  F. Martín,et al.  Electrochemical synthesis of CuSCN nanostructures, tuning the morphological and structural characteristics: From nanorods to nanostructured layers , 2017 .

[12]  M. McLachlan,et al.  Copper(I) Thiocyanate (CuSCN) Hole‐Transport Layers Processed from Aqueous Precursor Solutions and Their Application in Thin‐Film Transistors and Highly Efficient Organic and Organometal Halide Perovskite Solar Cells , 2017 .

[13]  M. Reddy,et al.  A study on solution deposited CuSCN thin films: Structural, electrochemical, optical properties , 2017 .

[14]  Pichaya Pattanasattayavong,et al.  Electronic Properties of Copper(I) Thiocyanate (CuSCN) , 2017 .

[15]  L. Kavan,et al.  Ultrathin Buffer Layers of SnO2 by Atomic Layer Deposition: Perfect Blocking Function and Thermal Stability , 2017 .

[16]  B. Marí,et al.  Electrochemical Fabrication and Characterization of p-CuSCN/n-Fe2O3 Heterojunction Devices for Hydrogen Production , 2017 .

[17]  Sandeep Kumar Pathak,et al.  Identification and Mitigation of a Critical Interfacial Instability in Perovskite Solar Cells Employing Copper Thiocyanate Hole‐Transporter , 2016 .

[18]  R. Tavakoli,et al.  Interface Engineering of Perovskite Solar Cell Using a Reduced-Graphene Scaffold , 2016 .

[19]  Pichaya Pattanasattayavong,et al.  Study of the Hole Transport Processes in Solution‐Processed Layers of the Wide Bandgap Semiconductor Copper(I) Thiocyanate (CuSCN) , 2015 .

[20]  Le Li,et al.  Semi-Transparent ZnO-CuI/CuSCN Photodiode Detector with Narrow-Band UV Photoresponse. , 2015, ACS applied materials & interfaces.

[21]  Hanxing Liu,et al.  Bath temperature and deposition potential dependences of CuSCN nanorod arrays prepared by electrochemical deposition , 2015, Journal of Materials Science.

[22]  T. Anthopoulos,et al.  Copper(I) thiocyanate (CuSCN) as a hole-transport material for large-area opto/electronics , 2015 .

[23]  A. Bond,et al.  Diminished Electron Transfer Kinetics for [Ru(NH3)6]3+/2+, [α-SiW12O40]4–/5–, and [α-SiW12O40]5–/6– Processes at Boron-Doped Diamond Electrodes , 2015 .

[24]  Wen-Sheng Chang,et al.  Influence of annealing on microstructural and photoelectrochemical characteristics of CuSCN thin films via electrochemical process , 2015 .

[25]  V. Delaye,et al.  Properties of Electrodeposited CuSCN 2D Layers and Nanowires Influenced by Their Mixed Domain Structure , 2014 .

[26]  Mohammad Khaja Nazeeruddin,et al.  Inorganic hole conductor-based lead halide perovskite solar cells with 12.4% conversion efficiency , 2014, Nature Communications.

[27]  L. Kavan.  Lithium insertion into TiO2 (anatase): electrochemistry, Raman spectroscopy, and isotope labeling , 2014, Journal of Solid State Electrochemistry.

[28]  L. Kavan,et al.  Electrochemical Characterization of TiO2 Blocking Layers for Dye-Sensitized Solar Cells , 2014 .

[29]  G. Hu,et al.  Orientation growth and electrical property of CuSCN films associated with the surface states , 2012 .

[30]  R. LeSuer,et al.  Modeling Diffusion of Tin into the Mesoporous Titanium Dioxide Layer of a Dye-Sensitized Solar Cell Photoanode , 2012 .

[31]  Preparation of structurally modified, conductivity enhanced-p-CuSCN and its application in dye-sensitized solid-state solar cells , 2012 .

[32]  L. Kavan,et al.  Spectroelectrochemistry of carbon nanotubes. , 2011, Chemphyschem : a European journal of chemical physics and physical chemistry.

[33]  L. Kavan,et al.  Spectroelectrochemistry of carbon nanostructures. , 2007, Chemphyschem : a European journal of chemical physics and physical chemistry.

[34]  Zhengguo Jin,et al.  Electrochemical deposition of p-type CuSCN in porous n-type TiO2 films , 2007 .

[35]  K. Tennakone,et al.  Doping CuSCN films for enhancement of conductivity: Application in dye-sensitized solid-state solar cells , 2005 .

[36]  C. Hsu,et al.  Technical Note: Concerning the Conversion of the Constant Phase Element Parameter Y0 into a Capacitance , 2001 .