Topology Optimization of Smart Structures Using a Homogenization Approach

Engineers are often required to design mechanical structures to meet specific loading conditions. Topology optimization automates the process of finding an optimal structural design, allowing for size, shape, and topology variations. For a given set of boundary conditions and design specifications, an optimal structure is computed, based on a formulated cost function. In this paper, the optimization considers not only the distribution of conventional material, but also simultaneously the distribution of active piezoelectric material within the domain. In the formulation of the topology optimization problem, a microstructure consisting of smart as well as conventional material is used. Instances of the microstructure occur in a rectangular grid and cover the design domain. Since the microstructure is defined parametrically, the density of each material can be controlled individually at each point. This enables us to formulate the problem of finding an optimal material distribution as a parameter optimization problem. A homogenization approach is used to find and use effective material properties for the limiting case of an infinitely small microstructure. Several numerical examples are provided to demonstrate the application of the method to find structures that maximize the deflection at a point when the piezoelectric material is activated.

[1]  A. Bensoussan,et al.  Asymptotic analysis for periodic structures , 1979 .

[2]  Jan Franců,et al.  Homogenization of linear elasticity equations , 1982 .

[3]  H. Saunders,et al.  Finite element procedures in engineering analysis , 1982 .

[4]  M. Bendsøe,et al.  Generating optimal topologies in structural design using a homogenization method , 1988 .

[5]  M. Bendsøe.  Optimal shape design as a material distribution problem , 1989 .

[6]  Ephrahim Garcia,et al.  A Self-Sensing Piezoelectric Actuator for Collocated Control , 1992 .

[7]  H. Mlejnek,et al.  An engineer's approach to optimal material distribution and shape finding , 1993 .

[8]  Ole Sigmund,et al.  Design of materials with extreme thermal expansion using a three-phase topology optimization method , 1997, Smart Structures.

[9]  Ole Sigmund,et al.  On the Design of Compliant Mechanisms Using Topology Optimization , 1997 .

[10]  Ulrich Gabbert,et al.  Simultaneous optimization of actuator position and control parameter for adaptive mechanical structures , 1998, Smart Structures.

[11]  Noboru Kikuchi,et al.  TOPOLOGY OPTIMIZATION OF COMPLIANT MECHANISMS USING THE HOMOGENIZATION METHOD , 1998 .

[12]  N. Kikuchi,et al.  Design of piezocomposite materials and piezoelectric transducers using topology optimization—Part I , 1999 .

[13]  L Padula Sharon,et al.  Optimization Strategies for Sensor and Actuator Placement , 1999 .

[14]  Aditi Chattopadhyay,et al.  Aeroelastic tailoring using piezoelectric actuation and hybrid optimization , 1999 .

[15]  Ulrich Gabbert,et al.  Optimization of piezoelectric material distribution in smart structures , 1999, Smart Structures.

[16]  S. Torquato,et al.  Design of smart composite materials using topology optimization , 1999 .

[17]  Mary Frecker,et al.  Topology optimization of compliant mechanisms with multiple outputs , 1999 .

[18]  Noboru Kikuchi,et al.  Design of piezoelectric transducers using topology optimization , 1999 .

[19]  N. Kikuchi,et al.  Topology optimization design of flextensional actuators , 2000, IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control.

[20]  Ole Sigmund,et al.  Design of multiphysics actuators using topology optimization - Part I: One-material structures , 2001 .

[21]  Noboru Kikuchi,et al.  Advances in computational design and optimization with application to MEMS , 2001 .

[22]  B. C. Chen,et al.  Composite material design of two‐dimensional structures using the homogenization design method , 2001 .

[23]  M. Collet.  Shape optimization of piezoelectric sensors dealing with spill-over instability , 2001, IEEE Trans. Control. Syst. Technol..

[24]  Ole Sigmund,et al.  A 99 line topology optimization code written in Matlab , 2001 .

[25]  Vittal S. Rao.  Smart Structures and Materials 2002: Modeling, Signal Processing, and Control , 2002 .

[26]  Gordon G. Parker,et al.  Numerical homogenization of active material finite-element cells , 2003 .

[27]  Markus J. Buehler,et al.  Robust design and control of piezoelectric laminate beams using a simultaneous optimization method , 2003, SPIE Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring.