WIRELESS BROADBAND ACCESS: WIMAX AND BEYOND - Investigation of Bandwidth Request Mechanisms under Point-to-Multipoint Mode of WiMAX Networks

The WiMAX standard specifies a metropolitan area broadband wireless access air interface. In order to support QoS for multimedia applications, various bandwidth request and scheduling mechanisms are suggested in WiMAX, in which a subscriber station can send request messages to a base station, and the base station can grant or reject the request according to the available radio resources. This article first compares two fundamental bandwidth request mechanisms specified in the standard, random access vs. polling under the point-to-multipoint mode, a mandatory transmission mode. Our results demonstrate that random access outperforms polling when the request rate is low. However, its performance degrades significantly when the channel is congested. Adaptive switching between random access and polling according to load can improve system performance. We also investigate the impact of channel noise on the random access request mechanism

[1]  Ying Zhang,et al.  Performance Analysis of the Random Access in IEEE 802.16 , 2005, 2005 IEEE 16th International Symposium on Personal, Indoor and Mobile Radio Communications.

[2]  Ying Zhang,et al.  WLC22-4: Efficient Request Mechanism Usage in IEEE 802.16 , 2006, IEEE Globecom 2006.

[3]  Andrey Lyakhov,et al.  Maximal Throughput of Wireless Access to the Internet: Its Estimation , 2004 .

[4]  Yang Xiao Energy saving mechanism in the IEEE 802.16e wireless MAN , 2005, IEEE Communications Letters.