Skin-conformal, soft material-enabled bioelectronic system with minimized motion artifacts for reliable health and performance monitoring of athletes.

Recent advances in biosensors, bioelectronics, and system integration allow the development of wristband-type devices for health and performance monitoring of athletes. Although these devices provide adequate sensing outputs, they suffer from signal loss due to improper contact of a rigid sensor with the skin. In addition, when a rubber band tightly secures the sensor to the skin, the gap between sensor and skin causes inevitable motion artifacts, resulting in corrupted data. Consequently, the rigidity and bulky form factor of the existing devices are not suitable for a practical use since athletes typically go through strenuous activities during training and matches. Here, we introduce a soft, wearable flexible hybrid electronics (WFHE) with integrated flexible sensors and circuits in an ultrathin, low-modulus elastomer. The thin-film bioelectronic system avoids the use of bulky, rigid sensors, while providing negligible mechanical and thermal burdens to the wearer. Enabling conformal contact between sensor and skin minimizes undesired motion artifacts. A set of computational and experimental studies of soft materials, flexible mechanics, and system packaging provides key fundamental design factors for a comfortable, reliable, waterproof bioelectronic system. Skin conformal WFHE with sparse signal reconstruction enables reliable, continuous monitoring of photoplethysmogram, heart rate, and activities of athletes. Development of a quantitative analysis between impact force and impact velocity extracted from motion acceleration provides an objective assessment of an athletic punching force. Collectively, this study shows the first demonstration of a wireless, soft, thin-film electronics for a real-time, reliable assessment of athletic health and performance.

[1]  Hyun-Sung An,et al.  How accurate are the wrist-based heart rate monitors during walking and running activities? Are they accurate enough? , 2016, BMJ Open Sport & Exercise Medicine.

[2]  Uttam Kumar Roy,et al.  Non-Invasive Heart State Monitoring an Article on Latest PPG Processing , 2018, Biomedical and Pharmacology Journal.

[3]  J. Y. Sim,et al.  Mechanically transformative electronics, sensors, and implantable devices , 2019, Science Advances.

[4]  Roozbeh Jafari,et al.  Robust heart rate estimation using wrist-based PPG signals in the presence of intense physical activities , 2015, 2015 37th Annual International Conference of the IEEE Engineering in Medicine and Biology Society (EMBC).

[5]  Woon-Hong Yeo,et al.  Wireless, Skin-Like Membrane Electronics With Multifunctional Ergonomic Sensors for Enhanced Pediatric Care , 2019, IEEE Transactions on Biomedical Engineering.

[6]  M. Kaltenbrunner,et al.  Ultraflexible organic photonic skin , 2016, Science Advances.

[7]  Dwaipayan Biswas,et al.  Heart Rate Estimation From Wrist-Worn Photoplethysmography: A Review , 2019, IEEE Sensors Journal.

[8]  E. O. Polat,et al.  Flexible graphene photodetectors for wearable fitness monitoring , 2019, Science Advances.

[9]  Amber E. Rowell,et al.  A Standardized Small Sided Game Can Be Used to Monitor Neuromuscular Fatigue in Professional A-League Football Players , 2018, Front. Physiol..

[10]  Mohammad Hossein Jarrahi,et al.  Wearable activity trackers, accuracy, adoption, acceptance and health impact: A systematic literature review , 2019, J. Biomed. Informatics.

[11]  Dhruv R. Seshadri,et al.  Wearable sensors for monitoring the physiological and biochemical profile of the athlete , 2019, npj Digital Medicine.

[12]  Moongee Cho,et al.  Fabric-based stretchable electronics with mechanically optimized designs and prestrained composite substrates , 2014 .

[13]  Jung Woo Lee,et al.  Battery-free, stretchable optoelectronic systems for wireless optical characterization of the skin , 2016, Science Advances.

[14]  Eduardo Gil,et al.  Finger and forehead PPG signal comparison for respiratory rate estimation. , 2019, Physiological measurement.

[15]  Ki H. Chon,et al.  A Novel Time-Varying Spectral Filtering Algorithm for Reconstruction of Motion Artifact Corrupted Heart Rate Signals During Intense Physical Activities Using a Wearable Photoplethysmogram Sensor , 2015, Sensors.

[16]  Willis J. Tompkins,et al.  A Real-Time QRS Detection Algorithm , 1985, IEEE Transactions on Biomedical Engineering.

[17]  Woosik Lee,et al.  Fractal design concepts for stretchable electronics , 2014, Nature Communications.

[18]  Marko Kos,et al.  A Wearable Device and System for Movement and Biometric Data Acquisition for Sports Applications , 2017, IEEE Access.

[19]  Dong Sup Lee,et al.  Wireless, intraoral hybrid electronics for real-time quantification of sodium intake toward hypertension management , 2018, Proceedings of the National Academy of Sciences.

[20]  Sunghoon Kim,et al.  Golf swing analysis system with a dual band and motion analysis algorithm , 2017, IEEE Transactions on Consumer Electronics.

[21]  Cynthia Bir,et al.  AMATEUR BOXER BIOMECHANICS AND PUNCH FORCE , 2010 .

[22]  Carmel Majidi,et al.  Rapid Fabrication of Soft, Multilayered Electronics for Wearable Biomonitoring , 2016 .

[23]  Woon-Hong Yeo,et al.  Ultrahigh Conductivity and Superior Interfacial Adhesion of a Nanostructured, Photonic-Sintered Copper Membrane for Printed Flexible Hybrid Electronics. , 2018, ACS applied materials & interfaces.

[24]  H. Lee,et al.  Motion Artifact Cancellation in Wearable Photoplethysmography Using Gyroscope , 2019, IEEE Sensors Journal.

[25]  Iztok Fister,et al.  Sensors and Functionalities of Non-Invasive Wrist-Wearable Devices: A Review , 2018, Sensors.

[26]  Afandi Ahmad,et al.  Exploiting LabVIEW FPGA in Implementation of Real-Time Sensor Data Acquisition for Rowing Monitoring System , 2018, SCDM.

[27]  John A Rogers,et al.  Miniaturized Battery‐Free Wireless Systems for Wearable Pulse Oximetry , 2017, Advanced functional materials.

[28]  Debajyoti Pal,et al.  The future of smartwatches: assessing the end-users’ continuous usage using an extended expectation-confirmation model , 2018, Universal Access in the Information Society.

[29]  Huiju Park,et al.  Designing wearable computing devices for improved comfort and user acceptance , 2019, Ergonomics.

[30]  Woon-Hong Yeo,et al.  Soft Material-Enabled, Flexible Hybrid Electronics for Medicine, Healthcare, and Human-Machine Interfaces , 2018, Materials.

[31]  Haruki Kawanaka,et al.  Estimating heart rate using wrist-type Photoplethysmography and acceleration sensor while running , 2012, 2012 Annual International Conference of the IEEE Engineering in Medicine and Biology Society.