Multi-kilowatt Single-mode Ytterbium-doped Large-core Fiber Laser

We have demonstrated a highly efficient cladding-pumped ytterbium-doped fiber laser, generating >2.1 kW of continuous-wave output power at 1.1 µm with 74% slope efficiency with respect to launched pump power. The beam quality factor (M2) was better than 1.2. The maximum output power was only limited by available pump power, showing no evidence of roll-over even at the highest output power. We present data on how the beam quality depends on the fiber parameter, based on our current and past fiber laser developments. We also discuss the ultimate power-capability of our fiber in terms of thermal management, Raman nonlinear scattering, and material damage, and estimate it to 10 kW

[1]  M. Ibsen,et al.  High average power, high repetition rate, picosecond pulsed fiber master oscillator power amplifier source seeded by a gain-switched laser diode at 1060 nm , 2006, IEEE Photonics Technology Letters.

[2]  Ik-Bu Sohn,et al.  Laser Ablation of Polypropylene Films using Nanosecond, Picosecond, and Femtosecond Laser , 2008 .

[3]  D. Payne,et al.  Photodarkening in Yb-doped aluminosilicate fibers induced by 488 nm irradiation , 2007 .

[4]  Govind P. Agrawal,et al.  Nonlinear Fiber Optics , 1989 .

[5]  David C. Brown,et al.  Thermal, stress, and thermo-optic effects in high average power double-clad silica fiber lasers , 2001 .

[6]  J. Fini.  Bend-resistant design of conventional and microstructure fibers with very large mode area. , 2006, Optics express.

[7]  David J. Richardson,et al.  A 103 W erbium-ytterbium co-doped large-core fiber laser , 2003 .

[8]  Younghun Yu,et al.  Tilt Aberration Compensation Using Interference Patterns in Digital Holography , 2009 .

[9]  Mikko Söderlund,et al.  Photodarkening rate in Yb-doped silica fibers. , 2008, Applied optics.

[10]  Binh Do,et al.  Deterministic nanosecond laser-induced breakdown thresholds in pure and Yb3+ doped fused silica , 2007, SPIE LASE.

[11]  Jong Su Yi,et al.  Intermediate Holographic Data Storage System by Using Sequentially Superimposed Recording , 2009 .

[12]  D N Payne,et al.  Single-mode plane-polarized ytterbium-doped large-core fiber laser with 633-W continuous-wave output power. , 2005, Optics letters.

[13]  Yong Wang,et al.  Thermal effects in kilowatt fiber lasers , 2004, IEEE Photonics Technology Letters.

[14]  R. Horley,et al.  Erbium:Ytterbium Codoped Large-Core Fiber Laser With 297-W Continuous-Wave Output Power , 2007, IEEE Journal of Selected Topics in Quantum Electronics.

[15]  Walter Koechner,et al.  Solid-State Laser Engineering , 1976 .

[16]  L. Norin,et al.  Preventing photodarkening in ytterbium-doped high power fiber lasers; correlation to the UV-transparency of the core glass. , 2008, Optics express.

[17]  Yves Taillon,et al.  Yb-doped LMA triple-clad fiber laser , 2006, Photonics North.

[18]  Y. Jeong,et al.  Ytterbium-doped large-core fiber laser with 1.36 kW continuous-wave output power. , 2004, Optics express.

[19]  Stuart D. Jackson,et al.  Power scaling of 2 µm ytterbium-sensitised thulium-doped silica fibre laser diode-pumped at 975 nm , 2005 .

[20]  Y. Jeong,et al.  Power Scaling of Single-Frequency Ytterbium-Doped Fiber Master-Oscillator Power-Amplifier Sources up to 500 W , 2007, IEEE Journal of Selected Topics in Quantum Electronics.

[21]  Junji Kawanaka,et al.  High Power Lasers and Their New Applications , 2008 .

[22]  A A Said,et al.  Measurement of the optical damage threshold in fused quartz. , 1995, Applied optics.

[23]  David J. Richardson,et al.  Ytterbium-doped large-core fibre laser with 272 W output power , 2003 .