Controlled synthesis of hydrophilic concentrated polymer brushes and their friction/lubrication properties in aqueous solutions

Polymer brushes of water-soluble polymers, poly(2-hydroxyethyl acrylate) (PHEA) and poly(poly(oxyethyleneglycol)methylether acrylate) (PPEGA), were synthesized on a silicon wafer and a silica particle by applying photo-induced organotellurium-mediated radical polymerization to surface-initiated graft polymerization. High graft densities were obtained, corresponding to reduced graft densities of about 0.32 and 0.42 for the PHEA and PPEGA brushes, respectively. These values were high enough to be categorized in the regime of “concentrated” polymer brushes (CPBs). Atomic force microscopic (AFM) study revealed that the CPB of PPEGA was allowed to be highly swollen in water but the CPB of PHEA did not. This means that water is reasonably good for PPEGA but not for PHEA. The AFM microtribological study between swollen brushes revealed two lubrication regimes, namely, boundary- and hydrodynamic-lubrication regimes, with different shear-velocity dependencies. Reflecting insufficient quality of water as a solvent, the CPB of PHEA showed adhesive interaction and thereby a higher frictional coefficient μ in the boundary lubrication. More interestingly, super lubrication was achieved for the CPB of PPEGA with a μ value in the order of 10−4 in water and in 0.1 M aqueous NaCl solution (without the help of electrostatic repulsion). Super lubrication was concluded to be a characteristic feature of the CPB, even in an aqueous system. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011

[1]  N Nakabayashi,et al.  Why do phospholipid polymers reduce protein adsorption? , 1998, Journal of biomedical materials research.

[2]  M. L. Wagner,et al.  Tethered polymer-supported planar lipid bilayers for reconstitution of integral membrane proteins: silane-polyethyleneglycol-lipid as a cushion and covalent linker. , 2000, Biophysical journal.

[3]  W. Huck,et al.  Polymer brushes via surface-initiated polymerizations. , 2004, Chemical Society reviews.

[4]  T. Okano,et al.  Effects of graft densities and chain lengths on separation of bioactive compounds by nanolayered thermoresponsive polymer brush surfaces. , 2006, Langmuir : the ACS journal of surfaces and colloids.

[5]  T. Fukuda,et al.  Structure and properties of high-density polymer brushes prepared by surface-initiated living radical polymerization , 2006 .

[6]  P. Lacroix-Desmazes,et al.  Use of iodocompounds in radical polymerization. , 2006, Chemical reviews.

[7]  A. Nomura,et al.  Lubrication Mechanism of Concentrated Polymer Brushes in Solvents: Effect of Solvent Quality and Thereby Swelling State , 2011 .

[8]  Takeshi Fukuda,et al.  AFM studies on microtribology of concentrated polymer brushes in solvents , 2009 .

[9]  J. Yoshida,et al.  Practical protocols for organotellurium-mediated living radical polymerization by in situ generated initiators from AIBN and ditellurides , 2003 .

[10]  Timothy Senden,et al.  Measurement of forces in liquids using a force microscope , 1992 .

[11]  Kazuhiko Ishihara,et al.  Friction behavior of high-density poly(2-methacryloyloxyethyl phosphorylcholine) brush in aqueous media. , 2007, Soft matter.

[12]  H. Otsuka,et al.  Tribological Properties of Poly(methyl methacrylate) Brushes Prepared by Surface-Initiated Atom Transfer Radical Polymerization , 2005 .

[13]  Yutaka Kobayashi,et al.  A Systematic Study on Activation Processes in Organotellurium-Mediated Living Radical Polymerizations of Styrene, Methyl Methacrylate, Methyl Acrylate, and Vinyl Acetate , 2006 .

[14]  K. Matyjaszewski,et al.  Polymerization of acrylates by atom transfer radical polymerization. Homopolymerization of 2-hydroxyethyl acrylate , 1998 .

[15]  Jacob Klein,et al.  Lubrication at Physiological Pressures by Polyzwitterionic Brushes , 2009, Science.

[16]  Uri Raviv,et al.  Lubrication by charged polymers , 2003, Nature.

[17]  A. Kishida,et al.  Fabrication of High-Density Polymer Brush on Polymer Substrate by Surface-Initiated Living Radical Polymerization , 2005 .

[18]  J. Yoshida,et al.  Tailored synthesis of structurally defined polymers by organotellurium-mediated living radical polymerization (TERP): synthesis of poly(meth)acrylate derivatives and their di- and triblock copolymers. , 2002, Journal of the American Chemical Society.

[19]  P. Gennes,et al.  Rubber-rubber adhesion with connector molecules , 1992 .

[20]  S. Yamago.  Precision polymer synthesis by degenerative transfer controlled/living radical polymerization using organotellurium, organostibine, and organobismuthine chain-transfer agents. , 2009, Chemical reviews.

[21]  Tatsuya Ishikawa,et al.  Macroscopic frictional properties of poly(1-(2-methacryloyloxy)ethyl-3-butyl imidazolium bis(trifluoromethanesulfonyl)-imide) brush surfaces in an ionic liquid. , 2010, ACS applied materials & interfaces.

[22]  Yasuyuki Nakamura,et al.  Organotellurium-mediated controlled/living radical polymerization initiated by direct C-Te bond photolysis. , 2009, Journal of the American Chemical Society.

[23]  K. Nakanishi,et al.  Surface interaction of well‐defined, concentrated poly(2‐hydroxyethyl methacrylate) brushes with proteins , 2007 .

[24]  Hiroshi Watanabe,et al.  Precision synthesis of hybrid block copolymers by organotellurium-mediated successive living radical and cationic polymerizations. , 2011, Chemistry, an Asian journal.

[25]  Shaoyi Jiang,et al.  Superlow fouling sulfobetaine and carboxybetaine polymers on glass slides. , 2006, Langmuir : the ACS journal of surfaces and colloids.

[26]  Y. Cohen,et al.  A terminally anchored polymer chain in shear flow: Self-consistent velocity and segment density profiles , 1994 .

[27]  K. Koh,et al.  Synthesis of Monodisperse Silica Particles Coated with Well-Defined, High-Density Polymer Brushes by Surface-Initiated Atom Transfer Radical Polymerization , 2005 .

[28]  Kun Zhang,et al.  Suppression of Cell Adhesion on Well-defined Concentrated Polymer Brushes of Hydrophilic Polymers , 2010 .

[29]  W. Norde,et al.  Tethered polymer chains: surface chemistry and their impact on colloidal and surface properties. , 2003, Advances in colloid and interface science.

[30]  Harm-Anton Klok,et al.  Polymer brushes via surface-initiated controlled radical polymerization: synthesis, characterization, properties, and applications. , 2009, Chemical reviews.

[31]  Shinpei Yamamoto,et al.  Surface Interaction Forces of Well-Defined, High-Density Polymer Brushes Studied by Atomic Force Microscopy. 1. Effect of Chain Length , 2000 .

[32]  A. Takahara,et al.  Direct Synthesis of Well-Defined Poly[{2-(methacryloyloxy)ethyl}trimethylammonium chloride] Brush via Surface-Initiated Atom Transfer Radical Polymerization in Fluoroalcohol , 2010 .

[33]  Shiping Zhu,et al.  Adsorption of fibrinogen and lysozyme on silicon grafted with poly(2-methacryloyloxyethyl phosphorylcholine) via surface-initiated atom transfer radical polymerization. , 2005, Langmuir : the ACS journal of surfaces and colloids.

[34]  K. Iida,et al.  Organotellurium compounds as novel initiators for controlled/living radical polymerizations. Synthesis of functionalized polystyrenes and end-group modifications. , 2002, Journal of the American Chemical Society.

[35]  A. Takahara,et al.  Tribological properties of hydrophilic polymer brushes under wet conditions. , 2010, Chemical record.

[36]  N. Amer,et al.  Simultaneous measurement of lateral and normal forces with an optical‐beam‐deflection atomic force microscope , 1990 .

[37]  R. T. Arnold,et al.  Carbanion halogenations with carbon tetrahalides. .alpha.-Halo esters , 1978 .

[38]  E. Kumacheva,et al.  Confinement-Induced Phase Transitions in Simple Liquids , 1995, Science.

[39]  A. Kishida,et al.  Protein Repellency of Well-Defined, Concentrated Poly(2-hydroxyethyl methacrylate) Brushes by the Size-Exclusion Effect , 2006 .