DC/DC Converters for Electric Vehicles

The large number of automobiles in use around the world has caused and continues to cause serious problems of environment and human life. Air pollution, global warming, and the rapid depletion of the earth’s petroleum resources are now serious problems. Electric Vehicles (EVs), Hybrid Electric Vehicles (HEVs) and Fuel Cell Electric Vehicles (FCEVs) have been typically proposed to replace conventional vehicles in the near future. Most electric and hybrid electric configurations use two energy storage devices, one with high energy storage capability, called the “main energy system” (MES), and the other with high power capability and reversibility, called the “rechargeable energy storage system” (RESS). MES provides extended driving range, and RESS provides good acceleration and regenerative braking. Energy storage or supply devices vary their output voltage with load or state of charge and the high voltage of the DC-link create major challenges for vehicle designers when integrating energy storage / supply devices with a traction drive. DC-DC converters can be used to interface the elements in the electric power train by boosting or chopping the voltage levels. Due to the automotive constraints, the power converter structure has to be reliable, lightweight, small volume, with high efficiency, low electromagnetic interference and low current/voltage ripple. Thus, in this chapter, a comparative study on three DC/DC converters topologies (Conventional step-up dc-dc converter, interleaved 4-channels step-up dc-dc converter with independent inductors and Full-Bridge step-up dc-dc converter) is carried out. The modeling and the control of each topology are presented. Simulations of 30KW DC/DC converter are carried out for each topology. This study takes into account the weight, volume, current and voltage ripples, Electromagnetic Interference (EMI) and the efficiency of each converter topology.

[1]  E. Santini,et al.  A critical evaluation and design of bi-directional DC/DC converters for super-capacitors interfacing in fuel cell applications , 2004, Conference Record of the 2004 IEEE Industry Applications Conference, 2004. 39th IAS Annual Meeting..

[2]  Huang-Jen Chiu,et al.  A bidirectional DC–DC converter for fuel cell electric vehicle driving system , 2006, IEEE Transactions on Power Electronics.

[3]  Bin Wang,et al.  Comparison Study of Switching DC-DC Converter Control Techniques , 2006, 2006 International Conference on Communications, Circuits and Systems.

[4]  M. Cousineau,et al.  Multiphase coupled converter models dedicated to transient response and output voltage regulation studies , 2008, 2008 13th International Power Electronics and Motion Control Conference.

[5]  Elton Pepa,et al.  Adaptive Control of a Step-Up Full-Bridge DC-DC Converter for Variable Low Input Voltage Applications , 2004 .

[6]  B. Destraz,et al.  High Efficient Interleaved Multi-channel dc/dc Converter Dedicated to Mobile Applications , 2006, Conference Record of the 2006 IEEE Industry Applications Conference Forty-First IAS Annual Meeting.

[7]  O. Garcia,et al.  Bi-directional DC/DC Converter for Hybrid Vehicles , 2005, 2005 IEEE 36th Power Electronics Specialists Conference.

[8]  Jérôme Lachaize,et al.  Etude des stratégies et des structures de commande pour le pilotage des systèmes énergétiques à Pile à Combustible (PAC) destinés à la traction. (Missing) , 2004 .

[9]  J. Lai,et al.  Ultra high efficiency bidirectional dc-dc converter with multi-frequency pulse width modulation , 2008, 2008 Twenty-Third Annual IEEE Applied Power Electronics Conference and Exposition.

[10]  M. G. Arregui,et al.  Theoretical study of a power generation unit based on the hybridization of a fuel cell stack and ultra capacitors , 2007 .

[11]  Franco Maloberti,et al.  Circuits for Systems , 2011 .

[12]  Leon M. Tolbert,et al.  Fuel cell power conditioning for electric power applications: a summary , 2007 .

[13]  N. Schofield,et al.  Comparison of DC-DC Converter Interfaces for Fuel Cells in Electric Vehicle Applications , 2006, 2006 IEEE Vehicle Power and Propulsion Conference.

[14]  Peter Omand Rasmussen,et al.  Design and Comparison of Power Systems for a Fuel Cell Hybrid Electric Vehicle , 2008, 2008 IEEE Industry Applications Society Annual Meeting.

[15]  Marcos Garcia Arregui.  Theoretical study of a power generation unit based on the hybridization of a fuel cell stack and ultracapacitors : application to the design of an aircraft emergency electrical network , 2007 .

[16]  A. Farhadi,et al.  Modeling and Simulation of Electromagnetic Conducted Emission Due to Power Electronics Converters , 2006, 2006 International Conference on Power Electronic, Drives and Energy Systems.

[17]  Ioan Doré Landau.  The R-S-T digital controller design and applications , 1997 .