On the relative contribution of temperature, moisture and vapor pressure to delamination in a plastic IC package during lead-free solder reflow

The elimination of lead in electronics assembly has presented challenges on the process. During the conventional eutectic tin-lead solder reflow process, the delamination of the interface between the leadframe pad and the encapsulant has been found to be a precursor to the popcorning of plastic IC packages. The melting point of lead-free solder is more than 30-40/spl deg/C higher than that of eutectic tin-lead solder, which will require much higher peak reflow temperatures. Compared with the delamination during conventional lead-containing solder reflow process, the delamination problem would be expected to become more severe during a lead-free solder reflow process as the process temperature is higher and the thermo-mechanical stress caused by the CTE mismatch is larger than those during a eutectic solder reflow process. In this paper the entire thermal and moisture history of a plastic IC package is simulated from the start of level 1 moisture preconditioning to subsequent exposure to a lead-free solder reflow process lasting about 8 minutes. The transient development of the strain energy release rate due to thermal stress only G/sub t/, hygrostress only G/sub h/, vapor pressure only G/sub p/ and combined total strain energy release rate G/sub tot/ are computed and studied using the modified crack surface displacement extrapolation method (MCSDEM). Finite element models were constructed for a 160-leaded PQFP package. The initial crack length was varied from 0.1 mm to 3.5 mm to study the effect of crack size on the relative contributions of G/sub t/, G/sub h/ and G/sub p/.

[1]  Bernd Michel,et al.  Investigations on popcorn cracking of T-QFP packages , 1998, 1998 Proceedings. 48th Electronic Components and Technology Conference (Cat. No.98CH36206).

[2]  Jin Yu,et al.  A fracture mechanics analysis of the popcorn cracking in the plastic IC packages , 1997, Twenty First IEEE/CPMT International Electronics Manufacturing Technology Symposium Proceedings 1997 IEMT Symposium.

[3]  Andrew A. O. Tay,et al.  Modeling of Interfacial Delamination in Plastic IC Packages Under Hygrothermal Loading , 2005 .

[4]  Kunihiko Nishi,et al.  Analysis of package cracking during reflow soldering process , 1988, 26th Annual Proceedings Reliability Physics Symposium 1988.

[5]  Z. Suo,et al.  Mixed mode cracking in layered materials , 1991 .

[6]  Ryoji Yuuki,et al.  Efficient Boundary Element Analysis of Stress Intensity Factors for Interface Cracks in Dissimilar Materials , 1991 .

[7]  Andrew A. O. Tay,et al.  Predicting delamination in plastic IC packages and determining suitable mold compound properties , 1994 .

[8]  Andrew A. O. Tay,et al.  Effects of moisture and delamination on cracking of plastic IC packages during solder reflow , 1996, 1996 Proceedings 46th Electronic Components and Technology Conference.

[9]  I. Fukuzawa,et al.  Moisture Resistance Degradation of Plastic LSIs by Reflow Soldering , 1985, 23rd International Reliability Physics Symposium.

[10]  C. M. Garner,et al.  Challenges in converting to lead-free electronics , 2000, Proceedings of 3rd Electronics Packaging Technology Conference (EPTC 2000) (Cat. No.00EX456).

[11]  A.A.O. Tay,et al.  A numerical study of the effects of temperature, moisture and vapour pressure on delamination in a PQFP during solder reflow , 2004, Proceedings of 6th Electronics Packaging Technology Conference (EPTC 2004) (IEEE Cat. No.04EX971).

[12]  Andrew A. O. Tay,et al.  Influence of temperature, humidity, and defect location on delamination in plastic IC packages , 1999 .

[13]  W. Carpenter.  Extrapolation techniques for determining stress intensity factors , 1983 .

[14]  G. Slenski,et al.  A new criterion for package integrity under solder reflow conditions , 1995, 1995 Proceedings. 45th Electronic Components and Technology Conference.

[15]  C. Chang,et al.  Real-time popcorn analysis of plastic ball grid array packages during solder reflow , 1998, Twenty Third IEEE/CPMT International Electronics Manufacturing Technology Symposium (Cat. No.98CH36205).