Trade-off between the spatial and the frequency resolutions in measuring the power spectrum of the Brillouin backscattered light in an optical fiber.

We theoretically analyze the relation between the pulse width of light launched into an optical fiber and the resultant power spectrum of spontaneous Brillouin backscattered light. Through this analysis, we determine numerically that the bandwidth of the Brillouin backscattered light becomes wider, and thus the measurement accuracy in determining the peak-power frequency degrades in approximately inverse proportion to the launched pulse width. Experimental results with various pulse widths are in good agreement with the derived theoretical results.

[1]  D. J. Webb,et al.  Temperature Error Analysis for a Distributed Temperature Sensor Based on Stimulated Brillouin Scattering , 1996 .

[2]  G.M. Williams,et al.  Hybrid fiber Bragg grating/long period fiber grating sensor for strain/temperature discrimination , 1996, IEEE Photonics Technology Letters.

[3]  Nicol A. Heron,et al.  Experimental and theoretical studies on a distributed temperature sensor based on Brillouin scattering , 1995 .

[4]  M. Facchini,et al.  Distributed sensing using stimulated Brillouin scattering : towards ultimate resolution , 1997 .

[5]  M Farhadiroushan,et al.  Temperature and strain dependence of the power level and frequency of spontaneous Brillouin scattering in optical fibers. , 1997, Optics letters.

[6]  L. Thévenaz,et al.  Brillouin gain spectrum characterization in single-mode optical fibers , 1997 .

[7]  I. Bennion,et al.  Multiplexed identical broad-band-chirped grating interrogation system for large-strain sensing applications , 1997, IEEE Photonics Technology Letters.

[8]  T. Horiguchi,et al.  Tensile strain dependence of Brillouin frequency shift in silica optical fibers , 1989, IEEE Photonics Technology Letters.

[9]  Trevor P. Newson,et al.  RAMAN BACKSCATTER DISTRIBUTED TEMPERATURE SENSOR BASED ON A SELF-STARTING PASSIVELY MODELOCKED FIBRE RING LASER , 1996 .

[10]  T. Horiguchi,et al.  Performance improvement of a combined OTDR for distributed strain and loss measurement by randomizing the reference light polarization state , 1997, IEEE Photonics Technology Letters.

[11]  J. N. Ross,et al.  Distributed optical fibre Raman temperature sensor using a semiconductor light source and detector , 1985 .

[12]  M. Barnoski,et al.  Fiber waveguides: a novel technique for investigating attenuation characteristics. , 1976, Applied optics.

[13]  John P. Dakin,et al.  Discrimination between strain and temperature effects using dual-wavelength fibre grating sensors , 1994 .

[14]  T. Parker,et al.  A fully distributed simultaneous strain and temperature sensor using spontaneous Brillouin backscatter , 1997, IEEE Photonics Technology Letters.

[15]  Lin Zhang,et al.  In-fiber Bragg-grating temperature sensor system for medical applications , 1997 .

[16]  Yahei Koyamada,et al.  Brillouin optical-fiber time domain reflectometry , 1993 .

[17]  D. Garcus,et al.  Brillouin optical-fiber frequency-domain analysis for distributed temperature and strain measurements , 1997 .