Solid state transformer parallel operation with a tap changing line frequency transformer

Increase in load demand require upgrade of distribution transformers and significant investments. An alternative to a complete overhaul of the distribution transformer is to operate a solid state transformer in parallel with the line frequency transformer. This allows functionality to either share the load or accommodate overload conditions. In addition, other options for superior distribution system voltage control may be present. This paper focuses on the parallel operation and control strategy for a 33 kV / 415 V, 200 kVA distribution transformer with a 200 kVA parallel solid state transformer. Two control strategies, namely parallel load sharing operation and overload accommodation are investigated. Simulation results are presented for the parallel operation of a SST with a LFT and the effectiveness of the two strategies are discussed.

[1]  Tomonobu Senjyu,et al.  A method to reduce DC-link overvoltage of PMSG based WECS during LVRT , 2016, 2016 IEEE Region 10 Conference (TENCON).

[2]  Fei Wang,et al.  Parallel operation of solid state transformer , 2012, 2012 IEEE Energy Conversion Congress and Exposition (ECCE).

[3]  Marine propulsion PM motor control under inverter partial fault , 2016, 2016 IEEE 2nd Annual Southern Power Electronics Conference (SPEC).

[4]  Zhengming Zhao,et al.  Energy Feed-Forward and Direct Feed-Forward Control for Solid-State Transformer , 2015, IEEE Transactions on Power Electronics.

[5]  Alex Q. Huang,et al.  Voltage and Power Balance Control for a Cascaded H-Bridge Converter-Based Solid-State Transformer , 2013, IEEE Transactions on Power Electronics.

[6]  Nuwantha Fernando,et al.  Magnetic materials for electrical machine design and future research directions: A review , 2017, 2017 IEEE International Electric Machines and Drives Conference (IEMDC).

[7]  Nuwantha Fernando,et al.  A coordinated control of grid connected PMSG based wind energy conversion system under grid faults , 2017, 2017 IEEE 3rd International Future Energy Electronics Conference and ECCE Asia (IFEEC 2017 - ECCE Asia).

[8]  Raja Ayyanar,et al.  Energy-based control design for a solid state transformer , 2010, IEEE PES General Meeting.

[9]  C. Gerada,et al.  Converter temperature regulation with dual mode control of fault-tolerant permanent magnet motors , 2012, 2012 IEEE Energy Conversion Congress and Exposition (ECCE).

[10]  Chuangxin Guo,et al.  Overload strategy of transmission and transformation equipment for safety operation , 2014, 2014 IEEE PES General Meeting | Conference & Exposition.

[11]  J. P. Reynders,et al.  Failures in power system transformers and appropriate monitoring techniques , 1999 .

[12]  Roberto Linan,et al.  Optimized models for overload monitoring of power transformers in real time moisture migration model , 2013, IEEE Transactions on Dielectrics and Electrical Insulation.

[13]  Fei Wang,et al.  Design and Demonstration of a 3.6-kV–120-V/10-kVA Solid-State Transformer for Smart Grid Application , 2014, IEEE Transactions on Power Electronics.

[14]  M. Mcculloch,et al.  Degradation of mechanical properties of class-H winding insulation , 2017, 2017 IEEE International Electric Machines and Drives Conference (IEMDC).

[15]  M. Ferdowsi,et al.  Solid-state transformer stability and control considerations , 2014, 2014 IEEE Applied Power Electronics Conference and Exposition - APEC 2014.

[16]  Jacinto Martin-Arnedo,et al.  Solid state transformer with low-voltage ride-through and current unbalance management capabilities , 2013, IECON 2013 - 39th Annual Conference of the IEEE Industrial Electronics Society.

[17]  N. Hayakawa,et al.  Integration of asset management and smart grid with intelligent grid management system , 2013, IEEE Transactions on Dielectrics and Electrical Insulation.

[18]  Fei Wang,et al.  Comparisons of different control strategies for 20kVA solid state transformer , 2011, 2011 IEEE Energy Conversion Congress and Exposition.