Effect of vaneless diffuser width on the overall performance of a centrifugal compressor

Seven different vaneless diffuser designs varying in diffuser width are studied experimentally. One design is the basic design with the diffuser width and impeller exit and tip clearance width ratio of 1.0. The other six diffusers have width ratios of 0.903, 0.854, and 0.806. Three of the narrower diffusers have the width reduced from the shroud, and three from the hub and the shroud, divided evenly. The total-to-total efficiency and pressure ratio over the whole compressor are studied. It is possible to increase the efficiency of the compressor stage by reducing the diffuser width. The efficiency is increased over a wide operating range area at three different rotational speeds. The pressure ratios are increased at the design and low rotational speeds, but decreased at the high rotational speed. The shroud pinch seems to be more beneficial to the performance, while the hub pinch seems to have only a minor effect. The best design is the one with the width ratio of 0.854, with width reduction only at the shroud. A major finding is the experimental confirmation that the pinch influences the performance of the impeller, reducing the work input at the higher rotational speed.