Multizone Phenomenological Modeling of Combustion and Emissions for Multiple-Injection Common Rail Direct Injection Diesel Engines

[1]  K. Nishida,et al.  Simplified Three-Dimensional Modeling of Mixture Formation and Combustion in a D.I. Diesel Engine , 1989 .

[2]  Federico Millo,et al.  Experimental investigation on the effect of multiple injection strategies on emissions, noise and brake specific fuel consumption of an automotive direct injection common-rail diesel engine , 2003 .

[3]  G. Hohenberg.  Advanced Approaches for Heat Transfer Calculations , 1979 .

[4]  H. Hiroyasu,et al.  Development and Use of a Spray Combustion Modeling to Predict Diesel Engine Efficiency and Pollutant Emissions : Part 1 Combustion Modeling , 1983 .

[5]  Rolf D. Reitz,et al.  Mechanism of Soot and NOx Emission Reduction Using Multiple-injection in a Diesel Engine , 1996 .

[6]  Hyun Kyu Suh,et al.  Investigations of multiple injection strategies for the improvement of combustion and exhaust emissions characteristics in a low compression ratio (CR) engine , 2011 .

[7]  Rolf D. Reitz,et al.  Measurement of the Effect of Injection Rate and Split Injections on Diesel Engine Soot and NOx Emissions , 1994 .

[8]  Gianfranco Rizzo,et al.  Multi-Zone Predictive Modeling of Common Rail Multi-Injection Diesel Engines , 2006 .

[9]  Dennis N. Assanis,et al.  Multi-Zone DI Diesel Spray Combustion Model for Cycle Simulation Studies of Engine Performance and Emissions , 2001 .

[10]  Dimitrios T. Hountalas,et al.  Multi-Zone Combustion Modelling for the Prediction of Pollutants Emissions and Performance of DI Diesel Engines , 1997 .

[11]  Gunnar Stiesch,et al.  A Phenomenological Model for Accurate and Time Efficient Prediction of Heat Release and Exhaust Emissions in Direct-Injection Diesel Engines , 1999 .

[12]  Masahiro Ishida,et al.  The Effect of Pilot Injection on Combustion in a Turbocharged D. I. Diesel Engine , 1994 .

[13]  A. S. Kuleshov,et al.  Use of Multi-Zone DI Diesel Spray Combustion Model for Simulation and Optimization of Performance and Emissions of Engines with Multiple Injection , 2006 .

[14]  Takayuki Ito,et al.  Mixing-Controlled, Low Temperature Diesel Combustion with Pressure Modulated Multiple-Injection for HSDI Diesel Engine , 2010 .

[15]  Z Gao,et al.  A phenomenologically based computer model to predict soot and NOx emission in a direct injection diesel engine , 2001 .

[16]  J Wu,et al.  A direct injection diesel combustion model for use in transient condition analysis , 2001 .

[17]  Masataka Arai,et al.  Empirical Equations for the Sauter Mean Diameter of a Diesel Spray , 1989 .

[18]  Z. Bazari,et al.  A DI diesel combustion and emission predictive capability for use in cycle simulation , 1992 .

[19]  Konstantinos Boulouchos,et al.  A Phenomenological Combustion Model for Heat Release Rate Prediction in High-Speed DI Diesel Engines with Common Rail Injection , 2000 .

[20]  Federico Brusiani,et al.  Experimental and Numerical Investigation of High-Pressure Diesel Sprays with Multiple Injections at Engine Conditions , 2010 .

[21]  S. K. Chen,et al.  Simultaneous Reduction of NOx and Particulate Emissions by Using Multiple Injections in a Small Diesel Engine , 2000 .

[22]  B. Hjertager,et al.  On mathematical modeling of turbulent combustion with special emphasis on soot formation and combustion , 1977 .

[23]  Rolf D. Reitz,et al.  Reducing Particulate and NOx Emissions by Using Multiple Injections in a Heavy Duty D.I. Diesel Engine , 1994 .

[24]  R. Mobasheri,et al.  Investigation of Pilot and Multiple Injection Parameters on Mixture Formation and Combustion Characteristics in a Heavy Duty DI-Diesel Engine , 2012 .

[25]  Giovanni Bonandrini,et al.  Numerical Study on Multiple Injection Strategies in DISI Engines for Particulate Emission Control , 2012 .

[26]  Marco Sorrentino,et al.  Development and Identification of Phenomenological Models for Combustion and Emissions of Common-Rail Multi-Jet Diesel Engines , 2004 .

[27]  Jae Ou Chae,et al.  Modeling the Effects of Split Injection Scheme on Soot and NO Emissions of Direct Injection Diesel Engines by a Phenomenological Combustion Model , 1996 .

[28]  Vincent Talon,et al.  A Physical 0D Combustion Model Using Tabulated Chemistry with Presumed Probability Density Function Approach for Multi-Injection Diesel Engines , 2010 .

[29]  Rolf D. Reitz,et al.  Reducing Particulate and NOx Using Multiple Injections and EGR in a D.I. Diesel , 1995 .

[30]  J. C. Dent,et al.  Phenomenological combustion model for a quiescent chamber diesel engine , 1981 .

[31]  Wanhua Su,et al.  Using Multiple Injection Strategies in Diesel PCCI Combustion: Potential to Extend Engine Load, Improve Trade-off of Emissions and Efficiency , 2011 .

[32]  J. S. Chin,et al.  Steady-state evaporation characteristics of hydrocarbon fuel drops , 1983 .

[33]  Rolf D. Reitz,et al.  Application of A Multiple-Step Phenomenological Soot Model to HSDI Diesel Multiple Injection Modeling , 2005 .

[34]  Gianfranco Rizzo,et al.  Thermodynamic Modeling of Jet Formation and Combustion in Common Rail Multi-Jet Diesel Engines , 2005 .

[35]  Pramod S. Mehta,et al.  Phenomenological modeling of combustion and emissions for multiple-injection common rail direct injection engines , 2012 .

[36]  J. Nagle,et al.  OXIDATION OF CARBON BETWEEN 1000–2000°C , 1962 .

[37]  Multizone Model for DI Diesel Engine Combustion and Emissions , 1999 .

[38]  Dimitrios T. Hountalas,et al.  Using a Phenomenological Multi-Zone Model to Investigate the Effect of Injection Rate Shaping on Performance and Pollutants of a DI Heavy Duty Diesel Engine , 2002 .

[39]  Shigeru Shundoh,et al.  NOx Reduction from Diesel Combustion Using Pilot Injection with High Pressure Fuel Injection , 1992 .

[40]  Yifeng Wu,et al.  Application of a Phenomenological Soot Model for Diesel Engine Combustion , 2008 .

[41]  C Bertoli,et al.  Diesel Combustion control in common rail engines by new injection strategies , 2002 .

[42]  Michael Bargende,et al.  Quasi-Dimensional Modeling of CI-Combustion with Multiple Pilot- and Post Injections , 2010 .