Influence of shear speed and normal stress on the shear behavior and shear zone structure of granular materials in naturally drained ring shear tests

Abstract“Sliding Surface Liquefaction” is a process causing strength loss and consequent rapid motion and long runout of certain landslides. Using a new ring shear apparatus with a transparent shear-box and digital video camera system, shear-speed-controlled tests were conducted on mixed grains (mixture of three different sizes of sand and gravel) and mixed beads to study shear behavior and shear zone development process under the naturally drained condition in which pore pressure is allowed to dissipate through the opened upper drainage valve during shearing. Higher excess pore water pressure and lower minimum apparent friction were observed in the tests where grain crushing was more extensive under higher normal stress and higher shear speed. Along with the diffusion of silty water generated by grain crushing, smaller particles were transported upward and downward from the shear zone. Concentration of larger grains to the central and upper part of the shear zone was confirmed by means of visual observation together with grain size analysis of sliced samples from several layers after the test. On the other hand, smaller particles were accumulated mostly below the layer where larger grains were accumulated. The reason why larger grains were accumulated into the shear zone may be interpreted as follows: grains under shearing are also subjected to vertical movement, the penetration resistance of larger grains into a layer of moving particles is smaller than that into the static layer. Therefore, larger grains tend to move into the layer of moving grains. At the same time, smaller particles can drop into the pores of underlying larger grains downward due to gravity.